The development of novel antifouling and foul release coatings must be considered in the context of business, government, and academic research. Existing antifouling technology is based upon the use of broad-spectrum biocides. Foul release technology is partially developed, has incompletely understood mechanisms and unknown long term fates and effects. Business is structured to register, generate, deliver, apply, and remove antifouling coatings based upon broad-spectrum biocides. Business is weak in biology and study of fates and effects beyond those required for registration. Government is structured to regulate, respond to, and support basic research. Government is not proactive or cooperative. Academics are highly competitive, still relatively isolated from reality, strong in basic research, and not well versed in business or government. Rapid progress in novel coatings technology is unlikely in this environment. Business responses to regulations and awareness of environmental responsibility will drive the process.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
- Business Model
- Antifouling Coating
- Minimal Environmental Impact
- Antifouling Compound
- Antifouling Biocide
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Afsar A, de Nys R, Steinberg P (2003) The effects of foul-release coatings on the settlement and behaviour cyprid larvae of the barnacle Balanus amphitrite amphitrite Darwin. Biofouling 19(Suppl):105–110
Alberte RS, Snyder S, Zahuranec B (1992) Biofouling research needs for the United States Navy: program history and goals. Biofouling 6:91–95
AMBIO (2006) Advanced nanostructured surfaces for the control of biofouling http://www. ambio.bham.ac.uk/. Last accessed 14 July 2008
Brady RF, Singer IL (2000) Mechanical factors favouring release from fouling release coatings. Biofouling 15(1–3):73–81
Brancato MS, Toll J, DeForest D, Tear L (1999) Aquatic ecological risks posed by tributyltin in United States surface waters: pre-1989 to 1996 data. Environ Toxicol Chem 18:567–577
Bultman JD, Griffith JR, Field DE (1984) Fluopolymer coatings for the marine environment. In: Costlow JD, Tipper RC (eds.) Marine biodeterioration: an interdisciplinary study. US Naval Institute, Annapolis, MD, pp. 237–242
Callow ME, Willingham GL (1996) Degradation of antifouling biocides. Biofouling 10:239–249
Champ M (2000) A review of organotin regulatory strategies, pending actions, related costs and benefits. Sci Total Environ 258:21–71
Clare AS (1997) Towards nontoxic antifouling (mini-review). J Mar Biotechnol 6:3–6
Clare AS, Rittschof D, Gerhart DJ, Maki JS (1992) Molecular approaches to nontoxic antifouling. J Invert Reprod Dev 22:67–76
Costlow JDC, Tipper RC (1984) Marine biodeterioration: an interdisciplinary approach. US Naval Institute, Annapolis, MD
Dahllöf I, Grunnet K, Haller R, Hjorth M, Maraldo K, Petersen DG (2005) Analysis, Fate and toxicity of zinc and copper pyrithione in the marine environment. TemaNord 550–583
Fisher EC, Castelli VJ, Rodgers SD, Bleile HR (1984) Technology for control of marine biofouling — a review. In: Costlow JD, Tipper RC (eds.) Marine biodeterioration: an interdisciplinary study. US Naval Institute Press, Annapolis, MD, pp. 261–299
Galvin RM, Mellado JMR, Neihof RA (1998) A contribution to the study of the natural dynamics of pyrithione (ii): deactivation by direct chemical and adsorptive oxidation. Eur Water Manag 4:61–64
Gough MA, Fothergill J, Hendrie JD (1994) A survey of southern England coastal waters for the s-triazine antifouling compound Irgarol 1051. Mar Pollut Bull 28:613–620
Hadfield MG (1998) Research on settlement and metamorphosis of marine invertebrate larvae: past, present and future. Biofouling 12:9–29
Harrington JC, Jacobson A, Mazza LS, Willingham G (2000) Designing an environmentally safe marine antifoulant. Presented at the10th international congress on marine corrosion and fouling, DSTO, Melbourne
Holm ER, Orihuela B, Kavanagh CJ, Rittschof D (2005) Variation among families for characteristics of the adhesive plaque in the barnacle. Balanus amphitrite Biofouling 21:121–126
International Maritime Organization (IMO) (2003) International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978 relating thereto (cited 6 April 2003). http://www.imo.org/home.asp. Last accessed 14 July 2008
Kavanagh CJ, Swain GW, Kovach BS, Stein J, Darkangelo-Wood C, Truby K, Holm E, Montemarano J, Meyer A, Wiebe D (2003) The effects of silicone fluid additives and silicone elastomer matrices on barnacle adhesion strength. Biofouling 19:381–390
Liu D, Pacepavicius GJ, Maguire RJ, Lau YL, Okamura H, Aoyama I (1999) Survey for the occurrence of the new antifouling compound Irgarol 1051 in the aquatic environment. Water Res 33:2833–2843
New York State Department of Environmental Conservation (1996) NYSDEC Registration of Irgarol algicide. http://pmep.cce.cornell.edu/profiles/herb-growthreg/fatty-alcohol-monuron/ irgarol/new-act-ing-irgarol.htmlLast accessed 14 July 2008
Pesticide Action Network (2008) Diuron identification, toxicity, use, water pollution potential, ecological toxicity and regulatory information. PA N pesticides database. http://www.pesticideinfo.org/ Detail_Chemical.jsp?Rec_Id=PC33293 Last accessed 14 July 2008
Preiser HS, Ticker A, Bohlander GS (1984) Coating selection or optimum ship performance. In: Costlow JD, Tipper RC (eds.) Marine biodeterioration: an interdisciplinary study. US Naval Institute Press, Annapolis, MD, pp. 223–228
Readman JW (1996) Antifouling herbicides — a threat to the marine environment? Mar Pollut Bull 32:320–321
Rittschof D (2000) Natural product antifoulants: one perspective on the challenges related to coatings development. Biofouling 15:199–207
Rittschof D, Holm ER (1997) Antifouling and foul-release: a primer. In: Fingerman M, Nagabhushanam R, Thompson MF (eds.) Recent advances in marine biotechnology, vol I. Endocrinology and reproduction. Oxford and IBH, New Delhi, pp. 497–512
Rittschof D, Parker KK (2001) Cooperative antifoulant testing: a novel multisector approach. In: Fingerman M, Nagabhushanam R (eds.) Recent advances in marine biotechnology, vol VI. Science, Einfield, pp. 239–253
Stein J, Truby K, Wood CD, Gardner M, Swain G, Kavanagh C, Kovach B, Schultz M, Wiebe D, Holm E, Montemarano J, Wendt D, Smith C, Meyer A (2003) Silicone foul release coatings: effect of the interaction of oil and coating functionalities on the magnitude of macrofouling attachment strengths. Biofouling 19(Suppl):71–82
Schwarzenbach RP, Gschwend PM, Imboden DM (2003) Environmental organic chemistry, 2nd edn. Wiley, Hoboken
Tolosa I, Readman JW (1996) Simultaneous analysis of the antifouling agents: tributyltin, tripheyltin and Irgarol 1051 used in antifouling paints. Mar Pollut Bull 335:267–274
Tolosa IJ, Readman W, Blaevoet A, Ghilini S, Bartocci J, Horvat M (1996) Contamination of Mediterranean (Cote d'Azur) coastal waters by organotins and Irgarol 1051 used in antifouling paints. Mar Pollut Bull 32:335–341
Willingham GL, Jacobson AH (1996) Designing an environmentally safe marine antifoulant. ACS Symp Ser 640224:–233
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2009 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Rittschof, D. (2009). Novel Antifouling Coatings: A Multiconceptual Approach. In: Flemming, HC., Murthy, P.S., Venkatesan, R., Cooksey, K. (eds) Marine and Industrial Biofouling. Springer Series on Biofilms, vol 4. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-69796-1_9
Download citation
DOI: https://doi.org/10.1007/978-3-540-69796-1_9
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-69794-7
Online ISBN: 978-3-540-69796-1
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)