Abstract
Modern trends in process development are mainly based on the needs of the market for production that is characterized by the technical and economic advantages as compared to conventional production. Although the development of microsystems (MST) and microelectromechanical systems (MEMS) exists for more than 30 years, due to increased application in communication, automated production, transport, health care, and defense systems, there has been advancement of research related to the development and expansion of techniques for production of small size parts (from micro to nano sizes) in the recent years. The paper lists some of the techniques of microforming process with basic characteristics.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Karabegović, E., Brezočnik, M., Mahmić, M.: Nove tehnologije u proizvodnim procesima (Razvoj i primjena), Mašinski fakultet Mostar, Univerzitet Mostar, Bosna i Hercegovina, str. 70–72 (2014). ISBN 978-9958-058-02-8, COBISS.BH-ID 21640454
Jeswiet, J., Geiger, M., Engel, U., Kleiner, M., Schikorra, M., Duflou, J., Neugebauer, R., Bariani, P., Bruschi, S.: Metal forming progress since 2000. CIRP J. Manufact. Sci. Technol. 1, 2–17 (2008). https://doi.org/10.1016/j.cirpj.2008.06.005
Piwnik, J., Mogielnicki, K., Gabrylewski, M., Baranowski, P.: The experimental tool for micro-extrusion of metals. Arch. Foundry Eng. (AFE) 11(2), 195–198 (2011). ISSN (1897-3310)
Mogielnicki, K.: Numerical simulation in microforming for very small metal elements. In: Modeling and Simulation in Engineering Sciences. INTECH. http://dx.doi.org/10.5772/64275
Keran, Z.: Plitko gravurno kovanje s aspekta mikrooblikovanja, Doktorski rad, Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, Zagreb, str. 21–26 (2010). http://repozitorij.fsb.hr/1098/1/27_10_2010_FORMA_KONACNA.pdf
Wan-Nawang, W.A., Qin, Y., Liu, X.: An experimental study on the springback in bending of w-shaped micro sheet-metal parts. In: MATEC Web of Conferences. https://doi.org/10.1051/matecconf/20152109015
Amin, T., Milad, A., Sorooshian, S., Lori, E.S.: A review on micro formings. Mod. Appl. Sci. 9(9), 230–239 (2015). https://doi.org/10.5539/mas.v9n9p230. Published by Canadian Center of Science and Education
Hu, Z., Wielage, H., Vollertsen, F.: Economic micro forming using DLC- and TiN-coated tools. J. Technol. Plast. 36(2), 51–59 (2011). https://doi.org/10.2478/v10211-011-0006-z
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Karabegović, E., Mahmić, M., Šemić, E. (2019). Microforming Processes. In: Avdaković, S. (eds) Advanced Technologies, Systems, and Applications III. IAT 2018. Lecture Notes in Networks and Systems, vol 60. Springer, Cham. https://doi.org/10.1007/978-3-030-02577-9_31
Download citation
DOI: https://doi.org/10.1007/978-3-030-02577-9_31
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-02576-2
Online ISBN: 978-3-030-02577-9
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)