5.1 Summary
Polypyrrole actuators are low-voltage (1–3 V), moderate to large strain (2–35%), and relatively high stress (up to 34 MPa) actuator materials. Strain rates are moderate to low, reaching 11%/s, and frequency response can reach several hertz. Faster response (> 1 kHz) is anticipated in nanostructured materials. Forces can be maintained with minimal power expenditure. This chapter reports on the current status and some of the anticipated properties of conducting polymer actuators. Applications investigated to date include braille cells, shape changing stents, and variable camber foils. Situations where low voltage operation is valuable and volume or mass are constrained favor the use of conducting polymers.
Polypyrrole and other conducting polymers are typically electrochemically driven and can be constructed in linear or bending (bilayer) geometries. Synthesis can be by chemical or electrochemical means, and raw materials are generally very low in cost. These polymers are electronically conducting organic materials. They also allow ions to diffuse or migrate within them. An Increase in the voltage applied to a polymer electrode leads to removal of electrons and an increasingly positive charge within the volume of the polymer. This charge is balanced by negative ions that enter the polymer from a neighboring electrolyte phase (or by positive ions that leave). Ion insertion is generally accompanied by expansion of the polymer. The ions, solvent, and synthesis conditions determine the extent of this expansion, which can be anisotropic. A change in modulus has also been observed as a function of the oxidation state.
Models relating charge, strain, voltage, stress, and current have been developed that allow designers to evaluate the feasibility of designs. One of these modeling approaches is presented with the aim of enabling selection of appropriate device geometry.
The field of conducting polymer actuators is developing rapidly with larger strains, stresses, cycle lifetimes, and rates reported every year. The background needed to understand these developments and to decide if polypyrrole and in general conducting polymer actuators are appropriate for use in a given application is provided.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
5.11 References
Madden, J. D. W., Vandesteeg, N. A., Anquetil, P. A., Madden, P. G. A., Takshi, A., Pytel, R. Z., Lafontaine, S. R., Wieringa, P. A., and Hunter, I. W. Artificial muscle technology: Physical principles and naval prospects. Oceanic Engineering, IEEE Journal of 29(3), 706–728 (2004).
Baughman, R.H. Conducting polymer artificial muscles. Synthetic Metals 78, 339–353 (1996).
Baughman, R.H., Shacklette, R.L., and Elsenbaumer, R.L. Micro electromechanical actuators based on conducting polymers. In Lazarev, P.I. (ed.) Topics in Molecular. Organization and Engineering, Vol.7: Molecular Electronics. Kluwer, Dordrecht (1991).
Otero, T.F. Artificial muscles, electrodissolution and redox processes in conducting polymers. In Nalwa, H.S. (ed.) Handbook of organic and Conductive Molecules and Polymers. John Wiley & Sons, Chichester (1997).
Pei, Q. and Inganas, O. Electrochemical applications of the beam bending method; a novel way to study ion transport in electroactive polymers. Solid State Ionics 60, 161–166 (1993).
Herod, T.E. and Schlenoff, J.B. Doping induced strain in polyaniline: Stretchoelectrochemistry. Chemistry of Materials 5, 951–955 (1993).
Kaneto, K., Kaneko, M., and Takashima, W. Response of chemomechanical deformation in polyaniline film on variety of anions. Japanese Journal of Applied Physics 34, Part 2, L837–L840 (1995).
Pei, Q. and Inganas, O. Electrochemical application of the bending beam method. 1. Mass transport and volume changes in polypyrrole during redox. Journal of Physical Chemistry 96, 10507–10514 (1992).
Baughman, R.H. Conducting polymer artificial muscles. Synthetic Metals 78, 339–353 (1996).
Madden, J.D., Madden, P.G., Anquetil, P.A., and Hunter, I.W. Load and time dependence of displacement in a conducting polymer actuator. Materials Research Society Proceedings 698, 137–144 (2002).
Mazzoldi, A., Della Santa, A., and De Rossi, D. Conducting polymer actuators: Properties and modeling. In Osada, Y. and De Rossi, D.E. (eds.) Polymer Sensors and Actuators. Springer Verlag, Heidelberg (1999).
Madden, J.D., Madden, P.G., and Hunter, I.W. Conducting polymer actuators as engineering materials. In Yoseph Bar-Cohen (ed.) Proceeding of SPIE Smart Structures and Materials 2002: Electroactive Polymer Actuators and Devices. SPIE Press, Bellingham, WA (2002).
Mazzoldi, A., Della Santa, A., and De Rossi, D. Conducting polymer actuators: Properties and modeling. In Osada, Y. and De Rossi, D.E. (eds.) Polymer Sensors and Actuators. Springer Verlag, Heidelberg (1999).
Spinks, G., Liu, L., Wallace, G., and Zhou, D. Strain response from polypyrrole actuators under load. Advanced Functional Materials 12, 437–440 (2002).
Smela, E. and Gadegaard, N. Volume change in polypyrrole studied by atomic force microscopy. Journal of Physical Chemistry B 105, 9395–9405 (2001).
Hara, S., Zama, T., Takashima, W., and Kaneto, K. Gel-Like polypyrrole based artificial muscles with extremely large strain. Polymer Journal 36, 933–936 (2004).
Anquetil, P.A., Rinderknecht, D., Vandesteeg, N.A., Madden, J.D., and Hunter, I.W. Large strain actuation in polypyrrole actuators. Smart Structures and Materials 2004: Electroactive Polymer Actuators and Devices (EAPAD). 5385, 380–387. 2004-. San Diego, CA, SPIE.
Madden, J.D., Madden, P.G., and Hunter, I.W. Conducting polymer actuators as engineering materials. In Yoseph Bar-Cohen (ed.) Proceeding of SPIE Smart Structures and Materials 2002: Electroactive Polymer Actuators and Devices. SPIE Press, Bellingham, WA (2002).
Madden, J.D., Madden, P.G., and Hunter, I.W. Characterization of polypyrrole actuators: Modeling and performance. In Yoseph Bar-Cohen (ed.) Proceedings of SPIE 8th Annual Symposium on Smart Structures and Materials: Electroactive Polymer Actuators and Devices. SPIE, Bellingham WA (2001).
Hara, S., Zama, T., Takashima, W., and Kaneto, K. Free-Standing polypyrrole actuators with response rate of 10.8% s−1. Synthetic Metals 149, 199–201 (2005).
Wang, X.Z., Shapiro, B., and Smela, E. Visualizing ion currents in conjugated polymers. Advanced Materials 16, 1605-+ (2004).
Madden, J.D. Conducting Polymer Actuators. Ph.D. Thesis. Massachusetts Institute of Technology, Cambridge, MA (2000).
Kaneko, M., Fukui, M., Takashima, W., and Kaneto, K. Electrolyte and strain dependences of chemomechanical deformation of polyaniline film. Synthetic Metals 84, 795–796 (1997).
Spinks, G.M., Zhou, D.Z., Liu, L., and Wallace, G.G. The amounts per cycle of polypyrrole electromechanical actuators. Smart Materials & Structures 12, 468–472 (2003).
Madden, J.D., Cush, R.A., Kanigan, T.S., and Hunter, I.W. Fast contracting polypyrrole actuators. Synthetic Metals 113, 185–193 (2000).
Lacroix, J.C., Kanazawa, K.K., and Diaz, A. Polyaniline: A very fast electrochromic material. Journal of the Electrochemical Society 136, 1308–1313 (1989).
Vandesteeg, N., Madden, P.G.A., Madden, J.D., Anquetil, P.A., and Hunter, I.W. Synthesis and characterization of EDOT-based conducting polymer actuators. Smart Structures and Materials 2003: Electroactive Polymer Actuators and Devices (EAPAD). 5051, 349–356. 2003-. San Diego, CA, SPIE.
Yamaura, M., Hagiwara, T., and Iwata, K. Enhancement of electrical conductivity of polypyrrole film by stretching: Counter ion effect. Synthetic Metals 26, 209–224 (1988).
Ding, J. et al. High performance conducting polymer actuators utilizing a tubular geometry and helical wire interconnects. Synthetic Metals 8 (in press).
Kaneto, K., Min, Y., MacDiarmidm, and Alan, G. Conductive polyaniline laminates. 96. 94.
Gregory, R.V., Kimbrell, W.C., and Kuhn, H.H. Conductive textiles. Synthetic Metals 28, C823–C835 (1989).
Lu, W. et al. Use of ionic lquids for pi-conjugagted polymer electrochemical devices. Science 297, 983–987 (2002).
Yamaura, M., Sato, K., and Iwata, K. Memory effect of electrical conductivity upon the counter-anion exchange of polypyrrole films. Synthetic Metals 48, 337–354 (1992).
Sato, K., Yamaura, M., and Hagiwara, T. Study on the electrical conduction mechanism of polypyrrole films. Synthetic Metals 40, 35–48 (1991).
Yamaura, M., Sato, K., and Hagiwara, T. Effect of counter-anion exchange on electrical conductivity of polypyrrole films. Synthetic Metals 39, 43–60 (1990).
Yamaura, M., Hagiwara, T., and Iwata, K. Enhancement of electrical conductivity of polypyrrole film by stretching: counter ion effect. Synthetic Metals 26, 209–224 (1988).
Maw, S., Smela, E., Yoshida, K., Sommer-Larsen, P., and Stein, R.B. The effects of varying deposition current on bending behvior in PPy(DBS)-actuated bending beams. Sensors and Actuators A 89, 175–184. 2001.
Shimoda, S. and Smela, E. The effect of pH on polymerization and volume change in PPy(DBS). Electrochimica Acta 44, 219–238 (1998).
Kaneko, M., Fukui, M., Takashima, W., and Kaneto, K. Electrolyte and strain dependences of chemomechanical deformation of polyaniline film. Synthetic Metals 84, 795–796 (1997).
Pei, Q. and Inganas, O. Electrochemical application of the bending beam method. 1. Mass transport and volume changes in polypyrrole during redox. Journal of Physical Chemistry 96, 10507–10514 (1992).
Madden, J.D.W., Schmid, B., Hechinger, M., Lafontaine, S.R., Madden, P.G.A., Hover, F.S., Kimball, R., and Hunter, I.W. Application of polypyrrole actuators: Feasibility of variable camber foils. Oceanic Engineering, IEEE Journal of 29(3), 738–749. 2004.
Madden, J.D., Cush, R.A., Kanigan, T.S., and Hunter, I.W. Fast contracting polypyrrole actuators. Synthetic Metals 113, 185–193 (2000).
Anquetil, P.A., Rinderknecht, D., Vandesteeg, N.A., Madden, J.D., and Hunter, I.W. Large strain actuation in polypyrrole actuators. Smart Structures and Materials 2004: Electroactive Polymer Actuators and Devices (EAPAD). 5385, 380–387. 2004-. San Diego, CA, USA, SPIE.
Hara, S., Zama, T., Tanaka, N., Takashima, W., and Kaneto, K. Artificial fibular muscles with 20% strain based on polypyrrole-metal coil composites. Chemistry Letters 34, 784–785 (2005).
Smela, E. and Gadegaard, N. Surprising volume change in PPy(DBS): An atomic force microscopy study. Advanced Materials 11, 953–957 (1999).
Smela, E. and Gadegaard, N. Surprising volume change in PPy(DBS): An atomic force microscopy study. Advanced Materials 11, 953–957 (1999).
Smela, E., Kallenbach, M., and Holdenried, J. Electrochemically driven polypyrrole bilayers for moving and positioning bulk micromachined silicon plates. Journal of Microelectromechanical Systems. 8, 373 (1999).
Smela, E., Inganas, O., and Lundstrom, I. Conducting polymers as artificial muscles: hallenges and possibilities. Journal of Micromechanics & Microengineering 3, 203–205 (1993).
Wallace, G. et al. Ionic liquids and helical interconnects: bringing the electronic braille screen closer to reality. Proceedings of SPIE Smart Structures and Materials (in press), (2003).
Madden, J.D. Actuator selection for variable camber foils. Smart Structures and Materials 2004: Electroactive Polymer Actuators and Devices (EAPAD). 5385, 442–448. 2004-. San Diego, CA, USA, SPIE.
DellaSanta, A., Mazzoldi, A., and DeRossi, D. Steerable microcatheters actuated by embedded conducting polymer structures. Journal of Intelligent Material Systems and Structures 7, 292–300 (1996).
Elias, H.-G. Mega Molecules. Springer-Verlag, Berlin (1987).
Kohlman, R.S. and Epstein, A.J. Insulator-metal transistion and inhomogeneous metallic state in conducting polymers. In Skotheim, T.A., Elsenbaumer, R.L., and Reynolds, J.R. (eds.) Handbook of Conducting Polymers. Marcel Dekker, New York (1998).
Atkins, P.W. Physical Chemistry. W.H. Freeman, New York (1990).
Kittel, Charles. Introduction to Solid State Physcis. 66., John Wiley & Sons, New York
Roth, S. One-Dimensional Metals. Springer-Verlag, New York (1995).
Noda, A. and Watanabe, M. Electrochimica Acta 45, 1265–1270 (2000).
Jones, E.T., Chao, E., and Wrighton, M.J. Preparation and characterization of molecule-based transistors with a 50 nm separation. Journal of the American Chemical Society 109, 5526–5529 (1987).
Izadi-Najafabadi, A., Tan, D.T.H., and Madden, J.D.W. Towards high power polypyrrole-carbon capacitors. Synthetic Metals 152, 129–132 (2005).
Arbizzani, C., Mastroagostino, M., and Sacrosati, B. Conducting polymers for batteries, supercapacitors and optical devices. In Nalwa, H.S. (ed.) Handbook of Organic and Conductive Molecules and Polymers. John Wiley & Sons, Chichester (1997).
Hunter, I.W. and Lafontaine, S.A comparison of muscle with artificial actuators. Technical Digest IEEE Solid State Sensors and Actuators Workshop. 178–185. 92. IEEE.
Anquetil, P.A., Yu, H., Madden, J.D., Swager, T.M., and Hunter, I.W. Recent advances in thiophene-based molecular actuators. Smart Structures and Materials 2003: Electroactive Polymer Actuators and Devices (EAPAD). 5051, 42–53. 2003-. San Diego, CA, SPIE.
Marsella MJ, Reid RJ, Estassi S, and Wang LS. Tetra[2,3-thienylene]: A building block for single-molecule electromechanical actuators. Journal of the American Chemical Society 124(42), 12507–12510 (2002).
Baker, C.K. and Reynolds, J.R. A quartz microbalance study of the electrosynthesis of polypyrrole. Journal of Electroanalytical Chemistry 251, 307–322 (1988).
Yamaura, M., Sato, K., and Iwata, K. Memory effect of electrical conductivity upon the counter-anion exchange of polypyrrole films. Synthetic Metals 48, 337–354 (1992).
Yamaura, M., Sato, K., and Hagiwara, T. Effect of counter-anion exchange on electrical conductivity of polypyrrole films. Synthetic Metals 39, 43–60 (1990).
Ding, J. et al. High performance conducting polymer actuators utilizing a tubular geometry and helical wire interconnects. Synthetic Metals 138, 391–398 (2003).
Zama, T., Hara, S., Takashima, W., and Kaneto, K. Comparison of cxonducting polymer actuators based on polypyrrole doped with Bf4(-), Pf6(-), Cf3so3-, and Clo4-. Bulletin of the Chemical Society of Japan 78, 506–511 (2005).
Spinks, G.M., Xi, B.B., Zhou, D.Z., Truong, V.T., and Wallace, G.G. Enhanced control and stability of polypyrrole electromechanical actuators. Synthetic Metals 140, 273–280 (2004).
Madden, P.G.A. Ph. D. Thesis: Development and modeling of conducting polymer actuators and demonstration of a conducting polymer-based feedback loop. MIT, Cambridge, MA (2003).
Spinks, G.M. et al. Ionic liquids and polypyrrole helix tubes: Bringing the electronic Braille screen closer to reality. Proceedings of SPIE Smart Structures and Materials 5051, 372–380 (2003).
Spinks, G.M. and Truong, V.T. Work-per-cycle analysis for electromechanical actuators. Sensors and Actuators A-Physical 119, 455–461 (2005).
Madden, J.D., Rinderknecht, D., Anquetil, P.A., and Hunter, I.W. Cycle life and load in polypyrrole actuators. Sensors and Actuators A (2005).
Penner, R.M. and Martin, C.R. Electrochemical investigations of electronically conductive polymers. 2. Evaluation of charge-transport rates in polypyrrole using an alternating current impedance method. Journal of Physical Chemistry 93, 984–989 (1989).
Penner, Reginald M., Van Dyke, Leon S., and Martin, Charles R. Electrochemical evaluation of charge-transport rates in polypyrrole. Journal of Physical Chemistry 92, 5274–5282. 88.
Mao, H., Ochmanska, J., Paulse, C.D., and Pickup, P.G. Ion transport in pyrrole-based polymer films. Faraday Discussions of the Chemical Society 88, 165–176 (1989).
Bull, R.A., Fan, F.-R.F., and Bard, A.J. Polymer films on electrodes. Journal of the Electrochemical Society 129, 1009–1015 (1982).
Tanguy, J. and Hocklet, M. Capacitive charge and noncapacitive charge in conducting polymer electrodes. Journal of the Electrochemical Society: Electrochemical Science and Technology 795–801 (1987).
Posey, F. A. and Morozumi, T. Theory of potentiostatic and galvanostatic charging of the double layer in poirous electrodes. Journal of the Electrochemical Society 113(2), 176–184. 66.
Yeu, T., Nguyen, T.V., and White, R.E. A mathematical model for predicting cyclic voltammograms of electrically conductive polypyrrole. Journal of the Electrochemical Society: Electrochemical Science and Technology 1971–1976 (1988).
Tanguy, J., Mermilliod, N., and Hocklet, M. Capacitive charge and noncapacitive charge in conducting polymer electrodes. Journal of the Electrochemical Society: Electrochemical Science and Technology 795–801 (1987).
Yu H., Anquetil, P.A., Pullen, A.E., Madden, J.D., Madden, P.G., Swager, T.M., and Hunter, I.W. Molecular Actuators. 2002.
Della Santa, A., Mazzoldi, A., Tonci, C., and De Rossi, D. Passive mechanical properties of polypyrrole films: A continuum poroelastic model. Materials Science and Engineering C 5, 101–109 (1997).
Della Santa, A., Mazzoldi, A., and De Rossi, D. Journal of Smart Material Systems and Structures 7, 292–300 (1999).
Madden, J.D.W., Vandesteeg, N.A., Anquetil, P.A., Madden, P.G.A., Takshi, A., Pytel, R.Z., Lafontaine, S.R., Wieringa, P.A., and Hunter, I.W. Artificial muscle technology: physical principles and naval prospects. Oceanic Engineering, IEEE Journal of 29(3), 706–728. 2004.
Otero, T.F. Artificial muscles, electrodissolution and redox processes in conducting polymers. In Nalwa, H.S. (ed.) Handbook of Organic and Conductive Molecules and Polymers. John Wiley & Sons, Chichester (1997).
Bard, A.J. and Faulkner, L.R. Electrochemical Methods, Fundamentals and Applications. John Wiley & Sons, New York (1980).
Ren, X. and Pickup, P.G. The origin of the discrepancy between the low frequency AC capacitances and voltammetric capacitances of conducting polymers. Journal of Electroanalytical Chemistry 372, 289–291 (1994).
Kim, J.J., Amemiya, T., Tryk, D.A., Hashimoto, K., and Fujishima, A. Charge transport processes in electrochemically deposited poly(pyrrole) and poly(N-methylpyrrole) thin films. Journal of Electroanalytical Chemistry 416, 113–119 (1996).
Madden, J.D. et al. Artificial muscle technology: Physical principles and naval prospects. IEEE Journal of Oceanic Engineering 24 pages (2004).
Barisci, J.N., Spinks, G.M., Wallace, G.G., Madden, J.D., and Baughman, R.H. Increased actuation rate of electromechanical carbon nanotube actuators using potential pulses with resistance compensation. Smart Materials & Structures 12, 549–555 (2003).
Hollerbach, J., Hunter, I.W., and Ballantyne, J. A comparative analysis of actuator technologies for robotics. In Khatib, O., Craig, J., and Lozano-Perez (eds.) The Robotics Review 2. MIT Press, Cambridge, MA (1992).
Madden, J. D. W., Schmid, B., Hechinger, M., Lafontaine, S. R., Madden, P. G. A., Hover, F. S., Kimball, R., and Hunter, I. W. Application of polypyrrole actuators: feasibility of variable camber foils. Oceanic Engineering, IEEE Journal of 29(3), 738–749. 2004.
Madden, J.D. et al. Artificial muscle technology: Physical principles and naval prospects. IEEE Journal of Oceanic Engineering 24 pages (2004).
Anquetil, P.A., Yu, H., Madden, J.D., Swager, T.M., and Hunter, I.W. Recent advances in thiophene-based molecular actuators. Smart Structures and Materials 2003: Electroactive Polymer Actuators and Devices (EAPAD). 5051, 42–53. 2003-. San Diego, CA, USA, SPIE.
Anquetil, P.A., Rinderknecht, D., Vandesteeg, N.A., Madden, J.D., and Hunter, I.W. Large strain actuation in polypyrrole actuators. Smart Structures and Materials 2004: Electroactive Polymer Actuators and Devices (EAPAD). 5385, 380–387. 2004. San Diego, CA, SPIE.
Nakashima, T. et al. Enhanced electrochemical strain in polypyrrole films. Current Applied Physics 5, 202–208 (2005).
Lu, W. et al. Use of ionic liquids for pi-conjugated polymer electrochemical devices. Science 297, 983–987 (2002).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer-Verlag London Limited
About this chapter
Cite this chapter
Madden, J.D. (2007). Polypyrrole Actuators: Properties and Initial Applications. In: Kim, K.J., Tadokoro, S. (eds) Electroactive Polymers for Robotic Applications. Springer, London. https://doi.org/10.1007/978-1-84628-372-7_5
Download citation
DOI: https://doi.org/10.1007/978-1-84628-372-7_5
Publisher Name: Springer, London
Print ISBN: 978-1-84628-371-0
Online ISBN: 978-1-84628-372-7
eBook Packages: EngineeringEngineering (R0)