Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Meyer O.E., 1874. Zur Theorie der inneren Reibung. Journal für reine und angewandte Mathematik, 78, p. 130
Voigt W., 1892. Über innere Reibung fester Körper, insbesondere der Metalle. Annalen der Physik, 47, p. 671
Boltzmann L., 1876. Zur Theorie der elastischen Nachwirkung. Annalen der Physik, Erg. Bd. 7, p. 624
Maxwell J.C., 1867. On the dynamical theory of gases. Phil. Trans. Royal Soc., 157, p. 49
Zener C., 1948. Elasticity and Anelasticity in Metals. University of Chicago Press, Chicago MI
Tamm K. and Weiss O., 1959. Untersuchungen über periodische Wellen, exponentielle und komplexe Nahfelder im begrenzten Festkörper. Acustica, 9, p. 275
Weiss O., 1959. Über die Schallausbreitung in verlustbehafteten Medien mit komplexem Schub-und Kompressionsmodul. Acustica, 9, p. 387
Cremer L., 1934. Vierpoldarstellung und Resonanzkurven bei schwingenden Stäben. Sitzungsberichte der Preussischen. Akademie der Wissenschaften, phys.-math. Kl. I, p. 1
Mason W.P., 1958. Physical acoustics and the properties of solids. Van Nostrand, New York NY
DIN 53515: Bestimmung der viskoelastischen Eigenschaften von Gummi. Beuth Vertrieb, Berlin
Fitzgerald E.R. and Ferry J.D., 1953. Method for determining the dynamic mechanical behaviour of gels and solids at audio-frequencies—Comparison of mechanical and electrical properties. Journal of Colloid Science, 8, p. 1
Oberst H. and Frankenfeld K., 1952. Über die Dämpfung der Biegeschwingungen dünner Bleche durch festhaftende Beläge. Acustica, 2 Beihefte No. 4, p. 181
Oberst H, Becker G.W. and Frankenfeld K., 1954. Über die Dämpfung der Biegeschwingungen dünner Bleche durch fest haftende Beläge II. Akustische Beihefte Heft 1 (in Acustica, 4), p. 433
Nijman E.J.M. and Bellussi G.N.M., 2000. Helium as good as vacuum: The poor man's approach for accurate material damping measurements. Applied Acoustics, 60, p. 385
Truell R. and Elbaum C., 1961. High frequency ultrasonic stress waves. Handbuch der Physik (S. Flügge ed.). Springer Verlag, Berlin
Love A.E.H., 1948. A treatise on the mathematical theory of elasticity, p.119. Dover Publications, New York NY
Lücke K., 1962. Die von den Kristallbaufehlern und insbesondere von den Versetzungen verursachten Dämpfungserscheinungen. Metallkunde, 53, p. 57
Bordoni P.G., 1960. Dislocation relaxation at high frequencies. Nuovo Cimento, Suppl. 1, 17, p. 43
Wegel R. and Walter H., 1953. Internal dissipation in solids for small cyclic strains. Physics, 6, p. 141
Zemanek Jr. J. and Rudnik I., 1961. Attenuation and dispersion of elastic waves in a cylindrical bar. Journal of the Acoustical Society of America, 33, p. 1283
Bennewitz K. and Rötger H., 1936. Über die innere Reibung fester Körper; Absorptionsfrekvenzen von Metallen im akustischen Gebiet. Physikalische Zeitschrift, 37, p. 578
Bordoni P.G., Nuovo M. and Verdini L., 1959. Relaxation of dislocations in cubic face-cantered metals. Proc. 3rd International Congress on Acoustics, Stuttgart, Vol. 1, p. 583. Elsevier, Amsterdam (1961)
Förster F. and Köster W., 1937. Elastizitätsmodul und Dämpfung in Abhängigkeit vom Werkstoffzustand. Metallkunde, 29, p. 116.
Becker G.W. and Oberst H., 1956. Über das dynamisch-elastische Verhalten linear, vernetzter und gefüllter Kunststoffe. Kolloid Zeitschrift, 148, p. 6
Linhardt F. and Oberst H., 1961. Über dieTemperaturabhängigkeit schwingungsdämpfender Kunststoffe. Acustica, 11, p. 255
Williams M.L., Landel R.F. and Ferry J.D., 1955. Mechanical properties of substances of high molecular weight. 19. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. Journal of the American Chemical Society, 77, p.3701
Watters B.G., 1959. Transmission loss of some masonry walls. Journal of the Acoustical Societyt of America, 31, p. 898
Kuhl W. and Kaiser H., 1952. Absorption of structure-borne sound in building materials without and with sand-filled cavities. Acustica, 2, p. 179
Heckl M. and Nutsch J., 1995. Taschenbuch der Technischen Akustik, 2nd ed., Ch. 22 (M. Heckl, H.A. Müller eds.). Springer Verlag, Berlin
Kurtze G., 1956. Körperschalldämpfung durch körnige Medien. VDI-Berichte 8, p. 110
Kirstein T. and Müller H.W., 1960. Berichte des Beirats für Bauforschung beim Bundesminister für Wohnungsbau, H 13, Körperschall in Gebäuden. Ernst & Sohn, Berlin
Cremer L., 1963. Akustische Versuche an schwimmend verlegten Asphaltestrichen. Bitumen, 25, p. 93
Kerwin Jr. E.M., 1959. Damping of flexural waves by a constrained viscoelastic layer. Journal of the Acoustical Societyt of America, 31, p. 952
Kerwin Jr. E.M., 1959. Damping of flexural waves in plates by spaced damping treatments having spacers of finite stiffness. Proc. 3rd International Congress on Acoustics, Stuttgart, Vol. 1, p. 412. Elsevier, Amsterdam (1961)
Ross D., Ungar E.E. and Kerwin E.M., 1962. Structural damping. American Society of Mechanical Engineeing, New York NY
Parfitt G.G., 1962. The effect of cuts in damping tapes. Proc. 4th International Congress on Acoustics, Copenhagen, Paper P 21
Zeinetdinova R.Z., Naumkina N.I. and Tartakowski B.D., 1978. Effectiveness of a vibration-absorbing coating with a cut constraining layer. Soviet Physics Acoustics, 24, p. 347
Kurtze G. and Watters B.G., 1959. New wall design for high transmission loss or high damping. Journal of the Acoustical Society of America, 31, p. 739
Mead D.J. and Markus S., 1985. Coupled flexural, longitudinal and shear wave motion in two-or three-layered damped beams. Journal of Sound and Vibration, 99, p. 501
Heckl M., 1961. Wave propagation on beam-plate systems. Journal of the Acoustical Society of America, 33, p. 640
Albrecht A. and Möser M., 1989. Die dämpfende Wirkung dicker Entdröhnschichten auf Platten. Zeitschrift für Lärmbekämpfung, 36, p. 73
Schmidt H., 1954. Die Schallausbreitung in körnigen Substanzen. Acustica, 4, p. 639
Maidanik G., 1966. Energy dissipation associated with gas-pumping in structural joints. Journal of the Acoustical Society of America, 40, p. 1064
Trochidis A., 1982. Körperschalldämpfung mittels Gas-oder Flüssigkeitsschichten. Acustica, 51, p. 201
Chow L.C. and Pinnington R.J., 1987. Practical industrial method of increasing structural damping in machinery, I: Squeeze-film damping with air. Journal of Sound and Vibration, 118, p. 123
Chow L.C. and Pinnington R.J., 1987. Practical industrial method of increasing structural damping in machinery, II: Squeeze-film damping with air. Journal of Sound and Vibration, 118, p. 333
Ott D., 1978. Untersuchungen zur Schwingungsdämpfung durch Hysterese in Schraub-und Nietverbindungen. VDI-Berichte 320
Mindlin R.D. and Deresiewicz H., 1953. Elastic spheres in contact under varying oblique forces. Trans. ASME, Journal of Applied Mechanics, 20, p. 327
Gaul L., 1981. On the damping and transmission of flexural waves at structural joints. Ingenieur-Archiv, 51, p. 101
Petuelli G., 1983. Theoretische und experimentelle Bestimmung der Steifigkeits-und Dämpfungseigenschaften normalbelasteter Fügestellen. Diss. RWTH, Aachen
Schober U., 1990. Untersuchungen der Körperschalldämpfung durch Fügestellen in Motoren. Proc. of DAGA, Wien, p. 349
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2005 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Cremer, L., Heckl, M., Petersson, B. (2005). Damping. In: Structure-Borne Sound. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-26514-7_4
Download citation
DOI: https://doi.org/10.1007/3-540-26514-7_4
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-22696-3
Online ISBN: 978-3-540-26514-6
eBook Packages: EngineeringEngineering (R0)