Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Allison, J.E., and J.W. Jones, (1993) in Fundamentals of Metal Matrix Composites, S. Suresh, A. Mortensen, and A. Needleman, eds., Butterworth-Heinemann Stoneham, MA, p. 269.
Almond, E.A., and B. Roebuck, (1980) Metals Technology, 7, 83–85.
Arsenault, R.J., and U.T.S. Pillai, (1996) Metall Mater. Trans., 27A, 995–1001.
Arsenault, RJ., and S.B. Wu, (1987) Mater. Sci. Eng., 96, 77–88.
Aswath, P.B, S. Suresh, D.K. Holm, and A.F. Blom, (1988) J. Eng. Mater. Tech., 110 278–85.
Ayyar, A., J.J. Williams, and N. Chawla, (2005) Comp. Sci. Tech., submitted.
Baker, A.A., D.M. Braddick, and P.W. Jackson, (1972) J. Mater. Sci., 7, 747–762.
Bauschinger, J., (1886) Mitt: Mech-Tech Lab., <??>XIII Munchen.
Bettge, D., B. Gunther, W. Wedell, P.D. Portella, J. Hemptenmacher, and P.W.M. Peters, (2004) in Low Cycle Fatigue 5, (P. D. Portella, H. Sehitoglu, K. Hatanaka, eds.), DVM, Berline, pp. 81–86.
Blatt, D., J.R. Jira, and J.M. Larsen, (1995) Scripta Metall. Mater., 33, 939–944.
Bonnen, J.J., C.P. You, J.E. Allison, and J.W. Jones, (1990) in Proceedings of the International Conference on Fatigue, Pergamon Press, New York, pp. 887–892.
Boselli, J., P.D. Pitcher, P.J. Gregson, and I. Sinclair, (2001) Mater. Sci. Eng., A300, 113–124.
Calabrese, C., and C. Laird, (1974a) Mater. Sci. Eng., 13, 141–157.
Calabrese, C., and C. Laird, (1974b) Mater. Sci. Eng., 13, 159–174.
Carreno-Morelli, E., N. Chawla, and R. Schaller, (2001) J. Mater. Sci. Lett., 20, 163–165.
Champion, A.R., W.H. Krueger, H.S. Hartman, and A.K. Dhingra, (1978), in Proc. 1978 Intl. Conf. Composite Materials (ICCM/2), TMS-AIME, New York, p. 883.
Chawla, K.K, (1973a) Metallography, 6, 155.
Chawla, K.K., (1973b) Phil Mag., 28, 401.
Chawla, K.K., (1998) Composite Materials: Science & Engineering, Springer-Verlag, New York.
Chawla, K.K, (1975) Fiber Sci. Tech., 8, 49.
Chawla, K.K, (1991) in Metal Matrix Composites: Mechanisms and Properties, R.K. Everett and R.J. Arsenault, eds., Academic press, pp. 235–253.
Chawla, K.K., and N. Chawla, (2004) in Kirk-Othmer Encyclopedia, John-Wiley and Sons, New York.
Chawla, K.K., and P.K. Liaw, (1979) J. Mater. Sci., 14, 2143.
Chawla, K.K., and M. Metzger, (1972) J. Mater. Sci., 7, 34.
Chawla, N., (1997) Metall Mater. Trans., 28A, 2423.
Chawla, N., and J.E. Allison, (2001) in Encyclopedia of Materials: Science and Technology, vol. 3, (B. Ilschner and P. Lukas, eds.), Elsevier Science, pp. 2969–2974.
Chawla, N., C. Andres, J.W. Jones, and J.E. Allison, (1998a) Metall. Mater. Trans., 29A, 2843.
Chawla, N., C. Andres, J.W. Jones, and J.E. Allison, (1998b) Scripta Mater., 38, 1596.
Chawla, N., L.C. Davis, C. Andres, J.E. Allison, J.W. Jones, (2000a) Metall. Mater. Trans., 31A, 951–957.
Chawla, N., U. Habel, Y.-L. Shen, C. Andres, J.W. Jones, and J.E. Allison, (2000b) Metall. Mater. Trans., 31A, 531–540.
Chawla, N., J.W. Holmes, and R.A. Lowden, (1996) Scripta Mater., 35, 1411.
Chawla, N., J.W. Jones, and J.E. Allison, (1999).in Fatigue’ 99 (X.R. Wu and Z.G. Wang, eds.), EMAS/HEP.
Chawla, N., M. Kerr, and K.K. Chawla, (2005) J. Am. Ceram. Soc., 88, 101–108.
Chawla, N., and Y.-L. Shen, (2001) Adv. Eng. Mater., 3, 357–370.
Cook, J., and J.E. Gordon, (1964) Proc. Roy. Soc. Lond., A282, 508.
Cotterill, P.J., and P. Bowen, (1993) Composites, 24, 214–221.
Cotterill, P.J., and P. Bowen, (1996) Mater. Sci. Tech., 12, 523–529.
Couper, M.J., and K. Xia, (1991) in Metal Matrix Composites-Processing, Microstructure and Properties, (N. Hansen et al., eds.), Riso National Laboratory, Roskilde, Denmark, p. 291.
Davidson, D.L., K.S. Chan, A. McMinn, and G.R. Leverant, (1989) Metall. Trans., 20A, 2369–2378.
Doker, H., and G. Marci, (1983) Int. J. Fatigue, 5, 187–191.
Foulk III, J.W., D.H. Allen, and K.L.E. Helms, (1998) Mech. Mater., 29, 53–68.
Ganesh, V.V., and N. Chawla, (2004) Metall Mater. Trans., 35A, 53–62.
Gomez, J.P., and F.E. Wawner, (1988) personal communication.
Gouda, M., K.M. Prewo, and A.J. McEvily, (1981) in Fatigue of Fibrous Composite Materials, p. 101, ASTM STP, 723, Amer.Soc. Testing and Materials Philadelphia.
Hack, J.E., R.A. Page, and G.R. Leverant, (1987) Metall. Trans., 15A, 1389.
Hall, J., J.W. Jones, and A. Sachdev, (1994) Mater. Sci. Eng., A183, 69.
Harmon, D.M., C.R. Saff, and C.T. Sun, (1987) AFW AL-TR-87-3060. Air Force Wright Aeronautical Labs. Dayton, Ohio.
Hassan, H.A., J.J. Lewandowski, and M.H. Abd El-latif, (2004) Metall. Mater. Trans., 35A, 45–52.
Johnson, W.S., (1982) in Damage in Composite Materials, ASTM STP 775, American Society for Testing and Materials, Philadelphia, p. 83.
Johnson, W.S., (1988) in Mechanical and Physical Behavior of Metallic and Ceramic Composites, 9th Risø Intl. Symp. on Metallurgy and Materials Science, Rise Nat. Lab., Roskilde, Denmark.
Johnson, W.S., and R.R. Wallis, (1986) in Composite Materials: Fatigue and Fracture, ASTM STP 907, American Society for Testing and Materials, Philadelphia, p. 161.
Kerr, M., N. Chawla, and K.K. Chawla, (2005) JOM, 2, 67–70.
Kindermann, P., P. Schlund, H.-G. Sockel, M. Herr, W. Heinrich, K. Görtring, and U. Schleinkofer, (1999) Int. J. Refractory & Hard Materials, 17, 55
Kwei, L.K, and K.K. Chawla, (1992) J. Mater. Sci., 27, 1101–1106.
Lewandowski, J.J., (2000) in Comprehensive Composite Materials, vol. 3, (A. Kelly and C. Zweben, eds.), Elsevier Press, pp. 151–187.
Li, C., and F. Ellyin, (1996) Mater. Sci. Eng., A214, 115.
Liu, J., and P. Bowen, (2002) Acta Mater., 50, 4205–4218.
Liu, J., and P. Bowen, (2003) Metall. Mater. Trans., 334A, 1193–1202.
LLorca, J., (1994) Acta Metall. Mater., 42, 151–162.
LLorca, J., (2002) Prog. Mater. Sci., 47, 283–353.
LLorca, J., A. Needleman, and S. Suresh, (1990) Scripta Metall. Mater., 24, 1203.
LLorca, J., J. Ruiz, J.C. Healy, M. Elices, and C.J. Beevers, (1994) Mater. Sci.Eng., A185, 1–15.
LLorca, J., S. Suresh, and A. Needleman, (1992) Metall. Mater. Trans., 23A, 919–933.
Lukasak, D.A., and R.J. Bucci, (1992) Alloy Technology Div. Rep. No. KF-34, Alcoa Technical Center, Alcoa, PA.
Lukasak, D.A., and D.A. Koss, (1993) Composites, 24, 262.
Mackenzie, J.K., (1950) Proc. Phys. Soc., B63, 2.
Mall, S., and B. Portner, (1992) J. Eng Mater., Tech., 114, 409–415.
McCartney, R.F., R.C. Richard, and P.S. Trozzo, (1967) Trans. ASM, 60, 384.
McGuire, M.A., and B. Harris, (1974) J. Phys., Appl. Phys., 7, 1788.
Majumdar, B.S., and G.M. Newaz, (1995) Mater. Sci. Eng., A200, 114–129.
Meyers, M.A., and K.K. Chawla, (1999) Mechanical Behavior of Materials, Prentice-Hall.
Mott, N.F., (1952) PhilMag., 43, 1151.
Mueller, L.R., and M. Gregory, (1988) paper presented at First Annual Metals and Metals Processing Conf., SAMPE, Cherry Hill, NJ.
Orowan, E., (1959) in Internal Stresses and Fatigue in Metals, (G.M. Rassweiler and W.L. Grube, eds.), Elsevier Press, New York.
Page, R.A., J.E. Hack, R. Sherman, and G.R. Leverant, (1987) Metall. Trans., 15A, 1397.
Paris, P.C., M.P. Gomez, and W.P. Anderson, (1961) The Trend in Engineering, 13, 9.
Paris, P.C., and F. Erdogan, (1963) J. Basic. Eng. Trans. ASME, 85, 528.
Pfeiffer, N.J., and J.A. Alic., (1978) J. Eng. Mater. Tech., 100, 32.
Peters, P.W.M., J. Hemptenmacher, B. Gunther, D. Bettge, and P.D. Portella, (2004) in Proc. ECCM-11.
Pickard, S.M., and B. Derby, (1990) Acta Metall. Mater. 38, 2537–2552.
Poza, P., and J. LLorca, (1999) Metall. Mater. Trans., 30A, 857.
Pugsley, V.A., and H.-G. Sockel, (2004) Mater. Sci. Eng, A366, 87.
Rao, K.T. Venkateshwara, S.C. Siu, and R.O. Ritchie, (1993) Metall Trans., 24A, 721–734.
Rezai-Aria, F., T. Liechti, and G. Gagnon, (1993) Scripta Metall. Mater., 28, 587–592.
Roebuck, B., E.A. Almond, and A.M. Cottenden, (1984) Mater. Sci. Eng, 66, 179.
Salazar, A., J.Y. Pastor, and J. LLorca, (2004) IEEE Trans. Appl. Supercon., 14, 1941–1947.
Sanders, B.P., and S. Mall, (1996) J. Comp. Tech. Res., 18, 15–21.
Seeger, A., J. Diehl, S. Mader, and H. Rebstock, (1958) Phil. Mag., 2, 323.
Shang, J.K., W.K. Yu, and R.O. Ritchie, (1988) Mater. Sci. Eng. A102, 181–192.
Shen, Y.-L., M. Finot, A. Needleman and S. Suresh, (1995) Acta Metall. Mater., 43, 1701.
Starke, E.A., and G. Luetjering, (1979) in Fatigue and Microstructure, J.T. Stayley and E.A. Starke, eds., American Society for Metals, pp 205–243.
Stoloff, N.S., (1978) in Advances in Composite Materials, p. 247. Applied Sci. Pub., London.
Sugimura, Y., and S. Suresh, (1992) Metall Trans., 23A, 2231–2242.
Suresh, S., (1998) Fatigue of Materials, 2nd Ed., Cambridge University Press, Cambridge, UK.
Taylor, L.G., and D.A. Ryder, (1976) Composites, 1, 27.
Vasudevan, A.K., K. Sadananda, and N. Louat, (1994) Mater. Sci. Eng., A188, 1–22.
Vasudevan, A.K., and K. Sadananda, (1995) Metall. Mater. Trans., 26, 1221–1234.
Vyletel, G.M., D.C. Van Aken, and J.E. Allison, (1991) Scripta Metall. Mater., 25, 2405–2410.
Walls, D.P., G. Bao, and F.W. Zok, (1993) Ada Metall. Mater., 41, 2061–2071.
Walls, D.P., and F.W. Zok, (1994) Acta Metall. Mater., 42, 2675–2681.
Wu, G., and J.-M. Yang, (2005) JOM, 57, 72–79.
Xu, Z.R., K.K. Chawla, A. Wolfenden, A. Neuman, G.M. Liggett, and N. Chawla, (1995) Mater. Sci. Eng., A203, 75.
Zhang, T., and H. Ghonem, (1995) Fatigue. Fract. Eng. Mater. Struc., 18, 1249–1262.
Zhang, W., M. Gu, J. Chen, Z. Wu, F. Zhang, H.E. Deve’, (2003) Mater. Sci. Eng., A341, 9–17.
Rights and permissions
Copyright information
© 2006 Springer Science + Business Media, Inc.
About this chapter
Cite this chapter
(2006). Cyclic Fatigue. In: Metal Matrix Composites. Springer, Boston, MA. https://doi.org/10.1007/0-387-28567-9_8
Download citation
DOI: https://doi.org/10.1007/0-387-28567-9_8
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-23306-2
Online ISBN: 978-0-387-28567-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)