Abstract
The photon beam position monitor (PBPM) plays a critically important role in the accurate monitoring of the beam position. W (Wire)-PBPMs are installed at the front end and photon transfer line (PTL) of the diagnostic beamline and detect the change of position and angle of the beam orbit applied to the beamline. It provides beam stability and position data in real time, which can be used in feedback system with BPM in storage-ring. Also it provides beam profile, which makes it possible to figure out the specifications of beam. With two W-PBPMs, the angle information of beam could be acquired and the results coupled with beam profile are used with orbit correction. The W-PBPM has been designed and installed in the diagnostic beamline at Pohang Light Source. Herein the details of the design, analysis and performance for the W-PBPM will be reported.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. N. Kim, M. J. Kim, C. Lee, C. G. Ryu, J. Im and C. J. Koo, “Report of PBPM development”, PAL-PUB-2006-005, (2006).
X. Zhang, H. Sugiyama and M. Ando, Rev. Sci. Instrum 66, 1990 (1995).
H. J. Choi, H. Y. Kim and T. Y. Koo, “PBPM system on the Revolver beamline”, PAL (2004).
T. Izumi and T. Nakajima, Rev. Sci, Instrum 60, 1951 (1989).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, S., Kim, M., Kim, S. et al. The development of W-PBPM at diagnostic beamline. Journal of the Korean Physical Society 71, 836–841 (2017). https://doi.org/10.3938/jkps.71.836
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3938/jkps.71.836