Abstract
Demand for newer, stronger, stiffer, yet lighter-weight and environmental friendly (biodegradable) materials in the fields such as automobile for non-structural applications are ever increasing. The principal reasons for using natural (cellulosic) fibers is they possess several attractive properties such their economic feasibility, enhanced sustainability, good specific mechanical properties, and desirable aspect ratio for good performance after melt-processing. Natural fiber composite materials are now being rapidly utilized in automobile industries, and they have become the forefront of research and development activity. An interesting alternative for reinforcing soft polymeric matrices with short fibers is the use of cellulose fibers which show remarkable reinforcing effects in thermoplastics such as polypropylene. The current study made an attempt to investigate the suitability of sisal fibers for automobile industry for non-structural and low-strength interior applications. In this work native sisal fibers were extracted and the effect of alkali treatment on their morphological, tensile, moisture absorption and thermal properties were studied. Scanning electron micrographs indicated roughening of the surface of the fiber strands due to the removal of the hemicellulose layer on alkali treatment. The maximum weight-gain for the composite prepared from treated fibers was 2.12 %, while that for the composite prepared from untreated fiber was 4.33 %. From the thermograms, the results indicate initial degradation for the treated fiber to have improved from 174 °C to 230 °C (56 °C shift) when compared to the untreated fiber. This fiber has competitive advantages when evaluated with other natural fibers. A polymer composite was processed from the chemically modified fiber, profiled against equivalent material systems in Ashby material property charts exhibited its suitability for light, low strength and low flexure material applications which can use a potential replacement of fibres being used currently.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Kabir, M. M., Wang, H., Aravinthan, T., Cardona F., Lau, K.T., (2011), “Effects of natural fiber surface on composite properties,” Energy, Environment and Sustainability eddBE2011 Proceedings, pp. 94–99.
Anandjiwala, D. R., John, M. J., (2008), “Recent developments in chemical modification and characterization of natural fiber-reinforced composites,” Polymer Composites, Part A, Vol. 40, pp. 872–894.
Partanen, A., & Carus, M. (2016). Wood and natural fiber composites current trend in consumer goods and automotive parts. Reinforced Plastics, 60(3), 170–173.
Wong, K. J., Yousif, B F., Low, K. O, (2009), “The effects of alkali treatment on the interfacial adhesion of bamboo fibers,” Materials: Design and Applications Proceedings, IMechE Vol. 224, Part L, pp. 139–147.
FAOSTAT, http://www.fao.org/faostat/en/#home, 2012.
Ashori, A. (2008), “Wood–plastic composites as promising green-composites for automotive industries,” Bioresource Technology, Vol. 99. No. 11, pp. 4661–4667.
Kalia, S., Kaith, B.S., Kaur, I., (2011), “Cellulose Fibers: Bio- and Nano-polymer Composites Green Chemistry and Technology,” Springer-Verlag, Berlin Heidelberg, UK.
Xu, Z., Sun, D. W., Zeng, X. A. (2015), “Research developments in methods to reduce the carbon footprint of the food system: a review. Crit. Rev. Food Sci., Nutr., Vol. 55, pp. 1270–1286.
Ellison, G.C., McNaught, R., (2000), “The use of natural fibers in non-woven structures for application as automobile components substrates,” Ministry of Agriculture Fisheries and Food (http://www.defra.gov.uk/farm/acu/reserach/reports/Rdrep10.PDF>).
Biron, M. (2013). Thermosets and composites: material selection, applications, manufacturing and cost analysis. Elsevier.
Agoudjil, B., Benchabane, A., Boudenne, A., Ibos, L., Fois, M., (2011). “Renewable materials to reduce building heat loss: characterization of date palm wood,” Energy Build. Vol. 43, pp. 491–497.
Pilla, S., 2011. Handbook of Bioplastics and Biocomposites Engineering Applications. Scrivener Publishing, USA.
Sanjeev, K. G., (2001), “Composite based on natural fibers and thermoplastic matrices,” PhD Thesis, University of London, Britain.
Li, Y., Chunjing, H., Yehong, Y., (2008), “Interfacial studies of sisal fiber reinforced high density polyethylene (HDPE) composites,” Composites: Part A., Vol. 39, pp. 570–578.
Nirmal, U., Singh, N., Hashim, J., Saijod, T.W. L., Jamil Nadia., (2011), “On the effect of different polymer matrix and fiber treatment on single fiber pull-out test using betelnut fibers,” Materials and Design, Vol. 32, pp. 2717–2726.
Kommula, V. P., Reddy, K. O., Shukla, M., Marwala, T., & Rajulu, A. V. (2013). Physico-chemical, tensile, and thermal characterization of Napier grass (native African) fiber strands. International Journal of Polymer Analysis and Characterization, 18(4), 303–314.
Xiaolin, X., (2008), “Cellulose fiber reinforced nylon 6 and nylon 66 composite,” PhD Thesis, Georgia Institute of Technology, USA.
Lu, N., & Oza, S. (2013a). Thermal stability and thermo-mechanical properties of hemp-high density polyethylene composites: effect of two different chemical modifications. Composites Part B: Engineering, 44(1), 484–490.
Zhaoqhian, L., Xiaodonh, Z., Chonghua, P., (2011), “Effect of sisal fiber surface treatment on properties of sisal fiber reinforced polylactide composites,” International Journal of Polymer Science, Vol. 2011, pp. 1–7.
Sanjeevamurthy, G., Srinivas, G., (2012), “Sisal/coconut coir natural fibers-epoxy composite: Water absorption and mechanical properties,” International Journal of Engineering and Innovative Technology, Vol. 2, Issue 3, pp. 166–170.
Ashby, M. F., Gibson, U., Wegst, U., Olive, R., (1995), “The mechanical properties of natural materials. I. material property charts,” The Royal Science, Vol. 450, pp. 123–140.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mokaloba, N., Kommula, V.P. Exploration of Local cellulosic-fiber; its Modification and Potential use by the Industry. MRS Advances 3, 2015–2025 (2018). https://doi.org/10.1557/adv.2018.400
Published:
Issue Date:
DOI: https://doi.org/10.1557/adv.2018.400