Abstract
We investigate the coefficient of friction between a rigid cone and an elastomer with account of local heating due to frictional dissipation. The elastomer is modeled as a simple Kelvin body and an exponential dependency of viscosity on temperature is assumed. We show that the coefficient of friction is a function of only two dimensionless variables depending on the normal force, sliding velocity, the parameter characterizing the temperature dependence as well as shear modulus, viscosity at the ambient temperature and the indenter slope. One of the mentioned dimensionless variables does not depend on velocity and determines uniquely the form of the dependence of the coefficient of friction on velocity. Depending on the value of this controlling variable, the cases of weak and strong influence of temperature effects can be distinguished. In the case of strong dependence, a generalization of the classical “master curve” procedure introduced by Grosch is suggested by using both horizontal and vertical shift factors.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Popov, V.L., Contact Mechanics and Friction, Berlin: Springer, 2010.
Greenwood, J.A. and Tabor, D., The Friction of Hard Sliders on Lubricated Rubber—The Importance of Deformation Losses, Proc. Roy. Soc. London, 1958, vol. 71, no. 6, pp. 989–1001.
Grosch, K.A., Relation Between Friction and Viscoelastic Properties of Rubber, Proc. Roy. Soc. London A, 1963, vol. 274, no. 1356, pp. 21–39.
Barquins, M. and Courtel, R., Rubber Friction and Rheology of Viscoelastic Contact, Wear, 1975, vol. 32, no. 2, pp. 133–150.
Klüppel, M. and Heinrich, G., Rubber Friction on Self-Affine Road Tracks, Rubber Chem. Technol, 2000, vol. 73, no. 4, pp. 578–606.
Persson, B.N.J., Theory of Rubber Friction and Contact Mechanics, J. Chem. Phys., 2001, vol. 115, no. 8, pp. 3840–3861.
Amontons, G., De la Resistance Cause’e Dans les Machines, Tant par let Frottements des Parties Qui les Component, Que Par la Roideur des Cordes Qu’on y Employe, et la Maniere de Calculer L’un et L’autre, Mem. l’ Academie R, 1699.
Lorenz, B., Persson, B.N.J., Fortunato, G., Giustiniano, M., and Baldoni, F., Rubber Friction for Tire Tread Compound on Road Surfaces, J. Phys. Condens. Matter, 2013, vol. 25, no. 9, p. 095007.
Popov, V.L. and Dimaki, A.V., Using Hierarchical Memory to Calculate Friction Force between Fractal Rough Solid Surface and Elastomer with Arbitrary Linear Rheological Properties, Tech. Phys. Lett., 2011, vol. 37, no. 1, pp. 18–25.
Schallamach, A., The Load Dependence of Rubber Friction, Proc. Roy. Soc. London B, 1952, vol. 65, no. 657, pp. 657–661.
Rhee, S.K., Friction Properties of a Phenolic Resin Filled with Iron and Graphite—Sensitivity to Load, Speed and Temperature, Wear, vol. 28, no. 2, pp. 277–281.
Li, Q., Popov, M., Dimaki, A., Filippov, A.E., Kürschner, S., and Popov, V.L., Friction Between a Viscoelastic Body and a Rigid Surface with Random Self-Affine Roughness, Phys. Rev. Lett., 2013, vol. 111, p. 034301.
Popov, V.L., Voll, L., Li, Q., Chai, Y.S., and Popov, M., Generalized Law of Friction Between Elastomers and Differently Shaped Rough Bodies, Sci. Rep., 2014, vol. 4, p. 3750.
Li, Q., Dimaki, A., Popov, M., Psakhie, S.G., and Popov, V.L., Kinetics of the Coefficient of Friction of Elastomers, Sci. Rep., 2014, vol. 4, p. 5795.
Persson, B.N.J., Rubber Friction: Role of the Flash Temperature, J. Phys. Condens. Matter, 2006, vol. 18, no. 32, pp. 7789–7823.
Putignano, C., Le Rouzic, J., Reddyhoff, T., Carbone, G., and Dini, D., A Theoretical and Experimental Study of Viscoelastic Rolling Contacts Incorporating Thermal Effects, Proc. Inst. Mech. Eng., Part J: J. Eng. Tribology, 2014, pp. 3506501–14530681.
Heß, M., Über die Abbildung Ausgewählter Dreidimensionaler Kontakte auf Systeme Mit Niedrigerer räumlicher Dimension, Göttingen: Cuvillier-Verlag, 2011.
Popov, V.L. and Hess, M., Method of Dimensionality Reduction in Contact Mechanics and Friction: a Users Handbook. I. Axially-Symmetric Contacts, Facta Universitatis. Ser. Mech. Eng., 2014, vol. 12, no. 1, pp. 1–14.
Pohrt, R., Popov, V.L., and Filippov, A.E., Normal Contact Stiffness of Elastic Solids with Fractal Rough Surfaces for One- and Three-Dimensional Systems, Phys. Rev. E, 2012, vol. 86, p. 026710.
Kürschner, S. and Popov, V.L., Penetration of Self-Affine Fractal Rough Rigid Bodies into a Model Elastomer Having a Linear Viscous Rheology, Phys. Rev. E, 2013, vol. 87, p. 042802.
Popov, V.L. and Heß, M., Method of Dimensionality Reduction in Contact Mechanics and Friction, Berlin, Springer, 2014.
Popov, V.L., Method of Reduction of Dimensionality in Contact and Friction Mechanics: A Linkage between Micro and Macro Scales, Friction, 2013, vol. 1, no. 1, p. 41–62. doi 10.1007/s40544-013-0005-3
Gal, A.L., Yang, X., and Klüppel, M., Evaluation of Sliding Friction and Contact Mechanics of Elastomers Based on Dynamic-Mechanical Analysis, J. Chem. Phys., 2005, vol. 123, p. 014704.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Text © A.V. Dimaki, V.L. Popov, 2014, published in Fizicheskaya Mezomekhanika, 2014, Vol. 17, No. 5, pp. 57–62.
Rights and permissions
About this article
Cite this article
Dimaki, A.V., Popov, V.L. Coefficient of friction between a rigid conical indenter and a model elastomer: Influence of local frictional heating. Phys Mesomech 18, 75–80 (2015). https://doi.org/10.1134/S1029959915010087
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1029959915010087