Abstract
A more accurate determination of the plastic zone boundary for plane strain and plane stress state is proposed. The plastic zone boundary is determined with regard to plastic loosening, given exact stress distribution and Schleicher yield criterion. The presence of mean normal stress in the Schleicher criterion ensures uniform expansion of the plastic zone. The dependence of Poisson’s ratio and constraint ratio for plastic strain on plastic loosening of material is examined. These parameters peak at the tip or in the immediate vicinity of a stress concentrator and decrease with distance from it. In a small neighborhood of the crack tip, a region is found in which Poisson’s ratio is impossible to determine from the Schleicher criterion. The size of this region is identified with the size of the region of exhausted plasticity.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Panin, V.E. and Egorushkin, V.E., Nonequilibrium Thermodynamics of a Deformed Solid as a Multiscale System. Corpuscular-Wave Dualism of Plastic Shear, Phys. Mesomech., 2008, vol. 11, no. 3–4, pp. 105–123.
Rybin, V.V., Severe Plastic Deformation and Fracture of Metals, Moscow: Metallurgiya, 1986.
Panin, V.E., Elsukova, T.F., Egorushkin, V.E., Vauli-na, O.Yu., and Pochivalov, Yu.I., Nonlinear Wave Effects of Curvature Solitons in Surface Layers of High-Purity Aluminum Polycrystals under Severe Plastic Deformation. I. Experiment, Phys. Mesomech., 2008, vol. 11, no. 1–2, pp. 63–72.
Novozhilov, V.V., On Plastic Loosening, Prikl. Mat. Mekh., 1965, vol. 29, no. 4, pp. 681–689.
Stang, A.H., Greenspan, M., and Newman, S.B., Poisson’s Ratio of Some Structural Alloys for Large Strains, J. Res. Nat. Bur. Stand, 1946, vol. 37, no. 4, pp. 211–221.
Davidenkov, N.N. and Vasil’eva, D.M., On Poisson’s Ratio, Zavod. Lab., 1952, vol. 18, no. 5, pp. 596–599.
Zhukov, A.M., On Poisson’s Ratio in Plastic Zone, Izv. Akad. Nauk SSSR. Otdel. Tekhn. Nauk, 1954, no. 12, pp. 86–91.
Bolshanina, M.A. and Panin, V.E., Latent Energy of Deformation, in Investigation of Physics of Deformation, Izv. Akad. Nauk SSSR, 1957, pp. 193–233.
Kershtein, I.M., Klyushnikov, V.D., Lomakin, E.V., and Shesterikov, S.A., Fundamentals of Experimental Fracture Mechanics, Moscow: Mosk. Univ., 1989.
Kozhevnikova, M.E., Refinement of the Plastic-Zone Boundary in the Vicinity of a Crack Tip for the Quasiviscous and Viscous Types of Fracture, J. Appl. Mech. Tech. Phys., 2005, vol. 46, no. 1, pp. 102–107.
Hellan, K., Introduction to Fracture Mechanics, New York: McGraw-Hill, 1984.
Novozhilov, V.V., On Physical Sense of Stress Invariants in the Theory of Plasticity, Prikl. Mat. Mekh., 1952, vol. 16, no. 5, pp. 615–619.
Kovrizhnykh, A.M., Plane Stress Equations for the Von Mises-Schleicher Yield Criterion, J. Appl. Mech. Tech. Phys., 2004, vol. 45, no. 6, pp. 894–901.
Kadashevich, Yu.I. and Novozhilov, V.V., Theory of Plasticity Taking into Account Residual Microstresses, Prikl. Mat. Mekh., 1958, vol. 22, no. 1, pp. 78–89.
Shiratori, M., Miyoshi, T., and Matsushita, H., Numerical Fracture Mechanics, Tokyo: Jikkyo Shuppan, 1980.
Arutyunyan, R.A., Problems of Strain Aging and Long-Term Fracture in Mechanics of Materials, Saint-Petersburg: Izd. St.-Petersb. Univ., 2004.
Ivanova, V.S. and Terentiev, V.F., Nature of Fatigue of Metals, Moscow: Metallurgiya, 1975.
Zuev, L.B. and Danilov, V.I., Slow Autowave Processes in Deformed Solids, Phys. Mesomech., 2002, vol. 5, no. 5–6, pp. 97–114.
Zuev, L.B. and Danilov, V.I., The Nature of Large-Scale Correlations in Plastic Flow, Phys. Solid State, 1997, vol.39, no. 8, pp. 1241–1245.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.E. Kozhevnikova, 2012, published in Fizicheskaya Mezomekhanika, 2012, Vol. 15, No. 6, pp. 59–66.
Rights and permissions
About this article
Cite this article
Kozhevnikova, M.E. Plastic zone boundary and Poisson’s ratio depending on plastic loosening. Phys Mesomech 16, 162–169 (2013). https://doi.org/10.1134/S1029959913020070
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1029959913020070