Abstract
The review has been made of recent publications on modification of ZrB2/HfB2–SiC ultra-hightemperature ceramic composite materials (UHTC) by carbon components: amorphous carbon, graphite, graphene, fibers, and nanotubes. Available data have been presented on some aspects of oxidation of such materials at temperatures ≥1500°C and both at the atmospheric pressure and at the reduced oxygen partial pressure; structural features of the formed multilayer oxidized regions have been noted. It has been considered how the type and content of the carbon component and the conditions (first of all, temperature) of UHTC production affect the density, flexural strength, hardness, fracture toughness, and thermal and oxidation resistance of the modified ceramic composites.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
G. V. Samsonov, Refractory Compounds: A Handbook of Properties and Applications (Metallurgizdat, Moscow, 1963). [in Russian]
P. Rogl and P. E. Potter, Calphad 12, 191 (1988). doi 10.1016/0364-5916(88)90021-1
R. Rogl and H. Bittermann, J. Solid State Chem. 154, 257 (2000). doi 10.1006/jssc.2000.8846
E. Rudy and S. Windisch, Report AFML-TR-65–2 (Air Force Materials Laboratory, Wright Patterson Air Force Base, Ohio, 1966), Part II, Vol. XIII, pp. 1–212.
K. P. Portnoi, V. M. Romashov, and L. I. Vyroshina, Poroshk. Metall. 91 (7), 68 (1970).
G. V. Samsonov, A. S. Bolgar, E. A. Guseva, et al., High Temp.–High Pressures 5, 29 (1973).
G. V. Samsonov and L. Ya. Markovskii, Usp. Khim. XXV, 190 (1956).
P. Schwarzkopf and R. Kieffer, Refractory Hard Metals: Borides, Carbides, Nitrides, and Silicides: the Basic Constituents of Cemented Hard Metals and Their Use as High-Temperature Materials (Macmillan, New York, 1953).
E. P. Simonenko, D. V. Sevast’yanov, N. P. Simonenko, et al., Russ. J. Inorg. Chem. 58, 1669 (2013). doi 10.1134/S0036023613140039
R. Savino, L. Criscuolo, G. D. Di Martino, and S. Mungiguerra, J. Eur. Ceram. Soc. 38, 2937 (2018). doi 10.1016/j.jeurceramsoc.2017.12.043
A. Paul, J. Binner, and B. Vaidhyanathan, in Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications, Ed. by W. G. Fahrenholtz, E. J. Wuchina, W. E. Lee, and Y. Zhou (Wiley-Blackwell, New York, 2014), pp. 144–166. doi 10.1002/9781118700853.ch7
L. Silvestroni, H.-J. Kleebe, W. G. Fahrenholtz, and J. Watts, Sci. Rep. 7, Article no. 40730 (2017). doi 10.1038/srep40730
S. Guo, J. Am. Ceram. Soc. 101, 2707 (2018). doi 10.1111/jace.15446
E. Zapata-Solvas, D. Gomez-Garcia, A. Dominguez-Rodriguez, and W. E. Lee, J. Eur. Ceram. Soc. 38, 47 (2017). doi 10.1016/j.jeurceramsoc.2017.08.028
W. G. Fahrenholtz and G. E. Hilmas, Scripta Mater. 129, 94 (2017). doi 10.1016/j.scriptamat.2016.10.018
E. P. Simonenko, N. P. Simonenko, A. N. Gordeev, et al., Russ. J. Inorg. Chem. 63, 421 (2018). doi 10.1134/S0036023618040186
F. Monteverde and R. Savino, J. Am. Ceram. Soc. 95, 2282 (2012). doi 10.1111/j.1551-2916.2012.05226.x
X. Jin, R. He, X. Zhang, P. Hu, J. Alloys Compd. 566, 125 (2013). doi 10.1016/j.jallcom.2013.03.067
F. Monteverde and R. Savino, J. Am. Ceram. Soc. 95, 2282 (2012). doi 10.1111/j.1551-2916.2012.05226.x
A. Cecere, R. Savino, C. Allouis, and F. Monteverde, Int. J. Heat Mass Transfer 91, 747 (2015). doi 10.1016/j.ijheatmasstransfer.2015.08.029
T. A. Parthasarathy, M. D. Petry, M. K. Cinibulk, et al., J. Am. Ceram. Soc. 96, 907 (2013). doi 10.1111/jace.12180
T. H. Squire and J. Marschall, J. Eur. Ceram. Soc. 30, 2239 (2010).
V. G. Sevastyanov, E. P. Simonenko, A. N. Gordeev, et al., Russ. J. Inorg. Chem. 59, 1298 (2014). doi 10.1134/S0036023614110217
V. G. Sevastyanov, E. P. Simonenko, A. N. Gordeev, et al., Russ. J. Inorg. Chem. 60, 1360 (2015). doi 10.1134/S0036023615110133
E. P. Simonenko, A. N. Gordeev, N. P. Simonenko, et al., Russ. J. Inorg. Chem. 61, 1203 (2016). doi 10.1134/S003602361610017X
V. G. Sevast’yanov, E. P. Simonenko, A. N. Gordeev, et al., Russ. J. Inorg. Chem. 58, 1269 (2013). doi 10.1134/S003602361311017X
V. G. Sevastyanov, E. P. Simonenko, A. N. Gordeev, et al., Russ. J. Inorg. Chem. 59, 1361 (2014). doi 10.1134/S0036023614120250
Yu. B. Lyamin, V. Z. Poilov, E. N. Pryamilova, et al., Russ. J. Inorg. Chem. 61, 149 (2016). doi 10.1134/S0036023616020133
D. V. Grashchenkov, O. Yu. Sorokin, Yu. E. Lebedeva, and M. L. Vaganova, Russ. J. Appl. Chem. 88, 386 (2015).
P. S. Sokolov, A. V. Arakcheev, I. L. Mikhal’chik, et al., Refract. Ind. Ceram. 58, 46 (2017). doi 10.1007/s11148-017-0052-9
L. A. Chevykalova, I. Yu. Kelina, I. L. Mikhal’chik, et al., Refract. Ind. Ceram. 54, 455 (2014).
D. V. Kolovertnov and I. B. Ban’kovskaya, Glass Phys. Chem. 41, 324 (2015).
C. Wei, S. Li, K. Yin, et al., Ceram. Int. 44, 4385 (2018). doi 10.1016/j.ceramint.2017.12.036
S. Guo, J. Ceram. Soc. Jpn. 124, 166 (2016). doi 10.2109/jcersj2.15190
C. Wei and C. Ye, Int. J. Refract. Met. Hard Mater. 51, 233 (2015). doi 10.1016/j.ijrmhm.2015.04.023
L.-L. Wang, J. Liang, G.-D. Fang, et al., Ceram. Int. 40, 5255 (2014). doi 10.1016/j.ceramint.2013.10.097
C. Wei, X. Zhang, and S. Li, Ceram. Int. 40, 5001 (2014). doi 10.1016/j.ceramint.2013.08.070
M. M. Opeka, I. G. Talmy, and J. A. Zaykoski, J. Mater. Sci. 39, 5887 (2004). doi 10.1023/B:JMSC.0000041686.21788.77
J. Han, P. Hu, X. Zhang, et al., Compos. Sci. Technol. 68, 799 (2008). doi 10.1016/j.compscitech.2007.08.017
T. A. Parthasarathy, R. A. Rapp, M. Opeka, and M. K. Cinibulk, J. Am. Ceram. Soc. 95, 338 (2012). doi 10.1111/j.1551-2916.2011.04927.x
E. Eakins, D. D. Jayaseelan, and W. E. Lee, Metall. Mater. Trans. A. 42A, 878 (2011). doi 10.1007/s11661-010-0540-8
D. Gao, Y. Zhang, J. Fu, et al., Corros. Sci. 52, 3297 (2010). doi 10.1016/j.corsci.2010.06.004
K. S. Cissel and E. Opila, J. Am. Ceram. Soc. 101, 1765 (2018). doi 10.1111/jace.15298
W. G. Fahrenholtz, J. Am. Ceram. Soc. 90, 143 (2007). doi 10.1111/j.1551-2916.2006.01329.x
J. Li, T. J. Lenosky, C. J. Foörst, and S. Yip, J. Am. Ceram. Soc. 91, 1475 (2008). doi 10.1111/j.1551-2916.2008.02319.x
A. Rezaie, W. G. Fahrenholtz, and G. E. Hilmas, J. Eur. Ceram. Soc. 33, 413 (2013). doi 10.1016/j.jeurceramsoc. 2012.09.016
H. Jin, S. Meng, X. Zhang, et al., J. Am. Ceram. Soc. 99, 2474 (2016). doi 10.1111/jace.14232
Q. N. Nguyen, E. J. Opila, and R. C. Robinson, J. Electrochem. Soc. 151, B558 (2004). doi 10.1149/1.1786929
C.-L. Zhou, Y.-Y. Wang, Z.-Q. Cheng, et al., Adv. Mat. Res. 105–106, 199 (2010). doi 10.4028/www.scientific. net/AMR.105-106.199
H. Zhang, Y. Yan, Z. Huang, et al., J. Am. Ceram. Soc. 92, 1599 (2009). doi 10.1111/j.1551-2916.2009.03039.x
X.-J. Zhou, G.-J. Zhang, Y.-G. Li, et al., Mater. Lett. 61, 960 (2007). doi 10.1016/j.matlet.2006.06.024
S. Zhou, Z. Wang, X. Sun, and J. Han, Mater. Chem. Phys. 122, 470 (2010). doi 10.1016/j.matchemphys. 2010.03.028
X. Sun, X. Zhang, Z. Wang, et al., Key Eng. Mater. 434–435, 185 (2010). doi 10.4028/www.scientific. net/KEM.434-435.185
W.-M. Guo, Y. You, G.-J. Zhang, et al., J. Eur. Ceram. Soc. 35, 1985 (2015). doi 10.1016/j.jeurceramsoc. 2014.12.026
X. Zhang, Z. Wang, X. Sun, et al., Mater. Lett. 62, 4360 (2008). doi 10.1016/j.matlet.2008.07.027
Z. Wang, S. Wang, X. Zhang, et al., J. Alloys Compd. 484, 390 (2009). doi 10.1016/j.jallcom.2009.04.109
H. Jin, S. Meng, Q. Yang, and Y. Zhu, Ceram. Int. 39, 5591 (2013). doi 10.1016/j.ceramint.2012.12.074
H. Jin, S. Meng, Y. Zhu, and Y. Zhou, Mater. Des. 50, 509 (2013). doi 10.1016/j.matdes.2013.03.025
H. Jin, S. Meng, Q. Yang, and Y. Zhu, Ceram. Int. 39, 5591 (2013). doi 10.1016/j.ceramint.2012.12.074
X. H. Zhang, Z. Wang, P. Hu, et al., Scripta Mater. 61, 809 (2009). doi 10.1016/j.scriptamat.2009.07.001
Z. Wang, C. Hong, X. Zhang, et al., Mater. Chem. Phys. 113, 338 (2009). doi 10.1016/j.matchemphys. 2008.07.095
S. Zhou, Z. Wang, and W. Zhang, J. Alloys Compd. 485, 181 (2009). doi 10.1016/j.jallcom.2009.05.126
P. Hu, Z. Wang, and X. Sun, Int. J. Refract. Met. Hard Mater. 28, 280 (2010). doi 10.1016/j.ijrmhm.2009. 10.013
Z. Wang, Q. Qu, Z. Wu, and G. Shi, J. Alloys Compd. 509, 6871 (2011). doi 10.1016/j.jallcom.2011.03.163
L. Wang, J. Liang, and G. Fang, J. Alloys Compd. 619, 145 (2015). doi 10.1016/j.jallcom.2014.08.255
J. Niu, H. Jin, S. Meng, et al., Ceram. Int. 42, 5562 (2016). doi 10.1016/j.ceramint.2015.12.031
H. Jin, S. Meng, X. Zhang, et al., J. Eur. Ceram. Soc. 36, 1855 (2016). doi 10.1016/j.jeurceramsoc. 2016.02.040
Z. Wang, Z. Wu, and G. Shi, Mater. Sci. Eng., A. A528, 2870 (2011). doi 10.1016/j.msea.2010.12.079
L. Wang, D. Kong, G. Fang, and J. Liang, Int. J. Appl. Ceram. Technol. 14, 31 (2017). doi 10.1111/ijac.12613
R. Zhang, X. Cheng, D. Fang, et al., Mater. Des. 52, 17 (2013). doi 10.1016/j.matdes.2013.05.045
X. Chen, X. Peng, Z. Wei, et al., Mater. Des. 126, 91 (2017). doi 10.1016/j.matdes.2017.04.001
X. Zhang, Z. Wang, X. Sun, et al., Int. J. Mod. Phys. B 23, 1160 (2009). doi 10.1142/S0217979209060622
V. Zamora, M. Nygren, F. Guiberteau, and A. L. Ortiz, Ceram. Int. 40, 11457 (2014). doi 10.1016/j.ceramint. 2014.03.130
M. Shahedi Asl, M. J. Zamharir, Z. Ahmadi, and S. Parvizi, Mater. Sci. Eng., A 716, 99 (2018). doi 10.1016/j.msea.2018.01.038
M. Shahedi Asl, Ceram. Int. 44, 6935 (2018). doi 10.1016/j.ceramint.2018.01.122
Y. H. Cheng, Y. Qi, P. Hu, et al., J. Am. Ceram. Soc. 99, 2131 (2016). doi 10.1111/jace.14192
E. P. Simonenko, N. P. Simonenko, V. G. Sevastyanov, and N. T. Kuznetsov, Russ. J. Inorg. Chem. 61, 1483 (2016). doi 10.1134/S0036023616120172
E. P. Simonenko, N. P. Simonenko, D. V. Sevastyanov, et al., Russ. J. Inorg. Chem. 61, 1649 (2016). doi 10.1134/S0036023616130039
F. Li, Y. Cao, J. Liu, et al., Ceram. Int. 43, 7743 (2017). doi 10.1016/j.ceramint.2017.03.080
Y. Cao, H. Zhang, F. Li, et al., Ceram. Int. 41, 7823 (2015). doi 10.1016/j.ceramint.2015.02.117
E. P. Simonenko, N. P. Simonenko, E. K. Papynov, et al. Russ. J. Inorg. Chem. 63, 1 (2018). doi 10.1134/S0036023618010187
N. T. Kuznetsov, V. G. Sevastyanov, E. P. Simonenko, and N. P. Simonenko, RU Patent No. 2618567, 04.05.2017.
E. P. Simonenko, N. P. Simonenko, A. N. Gordeev, et al., Russ. J. Inorg. Chem. 63, 1345, (2018) doi 10.1134/S0036023618100170
E. P. Simonenko, N. P. Simonenko, A. N. Gordeev, et al., Russ. J. Inorg. Chem. 63, 1484, (2018) doi 10.1134/S0036023618110177
F. Yang, X. Zhang, J. Han, and S. Du, Mater. Lett. 62, 2925 (2008). doi 10.1016/j.matlet.2008.01.076
F. Yang, X. Zhang, J. Han, and S. Du, Mater. Des. 29, 1817 (2008). doi 10.1016/j.matdes.2008.03.011
F. Yang, X. Zhang, J. Han, and S. Diu, J. Compos. Mater. 44, 953 (2010). doi 10.1177/0021998309346545
F.-Y. Yang, X.-H. Zhang, and S.-Y. Du, Key Eng. Mater. 368–372, 1753 (2008). doi 10.4028/www.scientific. net/KEM.368-372.1753
F. Yang, X. Zhang, J. Han, and S. Du, J. Alloys Compd. 472, 395 (2009). doi 10.1016/j.jallcom. 2008.04.092
S. Guo, K. Naito, and Y. Kagawa, Ceram. Int. 39, 1567 (2013). doi 10.1016/j.ceramint.2012.07.108
S. Guo, Ceram. Int. 39, 5733 (2013). doi 10.1016/j.ceramint.2012.12.091
M. Shahedi Asl, F. Golmohammadi, M. Ghassemi Kakroudi, and M. Shokouhimehr, Ceram. Int. 42, 4498 (2016). doi 10.1016/j.ceramint.2015.11.139
M. Shahedi Asl, M. G. Kakroudi, I. Farahbakhsh, et al., Ceram. Int. 42, 18612 (2016). doi 10.1016/j.ceramint. 2016.08.205
K. Gui, P. Hu, W. Hong, et al., J. Alloys Compd. 706, 16 (2017). doi 10.1016/j.jallcom.2017.02.227
P. Hu, K. Gui, W. Hong, et al., J. Eur. Ceram. Soc. 37, 2317 (2017). doi 10.1016/j.jeurceramsoc.2017.02.008
W. Hong, K. Gui, P. Gui, et al., J. Adv. Ceram. 6, 110 (2017). doi 10.1007/s40145-017-0223-7
Z. Balak, M. Shahedi Asl, M. Azizieh, et al., Ceram. Int. 43, 2209 (2017). doi 10.1016/j.ceramint. 2016.11.005
M. Shahedi Asl, Ceram. Int. 43, 15047 (2017). doi 10.1016/j.ceramint.2017.08.030
Z. Balak, M. Azizieh, H. Kafashan, et al., Mater. Chem. Phys. 196, 333 (2017). doi 10.1016/j.matchemphys.2017.04.062
Z. Nasiri, M. Mashhadi, and A. Abdollahi, Int. J. Refract. Met. Hard Mater. 51, 216 (2015). doi 10.1016/j.ijrmhm.2015.04.005
W.-B. Tian, Y.-M. Kan, G.-J. Zhang, et al., Mater. Sci. Eng., A487, 568 (2008). doi 10.1016/j.msea.2007.11.027
M. Shahedi Asl, I. Farahbakhsh, and B. Nayebi, Ceram. Int. 42, 1950 (2016). doi 10.1016/j.ceramint. 2015.09.165
J. Lin, Y. Huang, H. Zhang, et al., Ceram. Int. 41, 15261 (2015). doi 10.1016/j.ceramint.2015.07.207
A. Nisar, S. Ariharan, and K. Balani, Ceram. Int. 43, 13483 (2017). doi 10.1016/j.ceramint.2017.07.053
A. Nisar, S. Ariharan, T. Venkateswaran, et al., Carbon 111, 269 (2017). doi 10.1016/j.carbon.2016.10.002
A. Nisar and K. Balani, Coatings 7, 110/1 (2017). doi 10.3390/coatings7080110
M. Shahedi Asl and M. Ghassemi Kakroudi, Mater. Sci. Eng., A. 625, 385 (2015). doi 10.1016/j.msea.2014.12.028
X. Zhang, Y. An, J. Han, et al., RSC Adv. 5, 47060 (2015). doi 10.1039/C5RA05922D
Y. An, X. Xu, and K. Gui, Ceram. Int. 42, 14066 (2016). doi 10.1016/j.ceramint.2016.06.014
B. Zhang, X. Zhang, C. Hong, et al., ACS Appl. Mater. Interfaces 8, 11675 (2016). doi 10.1021/acsami.6b00822
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Simonenko, E.P., Simonenko, N.P., Sevastyanov, V.G. et al. ZrB2/HfB2–SiC Ultra-High-Temperature Ceramic Materials Modified by Carbon Components: The Review. Russ. J. Inorg. Chem. 63, 1772–1795 (2018). https://doi.org/10.1134/S003602361814005X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S003602361814005X