Abstract
A thick gaseous electron multiplier is used as an active element in designing radiation-resistant fast-response detectors (hadron calorimeters, tracking detectors, etc.). Design and technological efforts have been made in order to optimize the structure of the element. Results of measurements and the nearest plans are presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Abdulin, S., Azuelos, G., Ball, A., et al., CERN-TH/2002-078, 2002.
Abramov, V., Volkov, A., Goncharov, P., et al., Nucl. Phys. B, Proc. Suppl., 2006, vol. 150, p. 110.
Breskin, A., Alon, R., Cortesi, M., et al., Nucl. Instrum. Methods Phys. Res. A, 2009, vol. 598, p. 107 and references therein.
Peskov, V., Fonte, P., Danielsson, M., et al., IEEE Trans. Nucl. Sci., 2001, vol. 48, p. 1070.
Abramov, V.V., Baldin, B.Yu., Buzulutskov, A.F., et al., Prib. Tekh. Eksp., 1992, no. 6, p. 75.
Author information
Authors and Affiliations
Additional information
Original Russian Text © V.I. In’shakov, V.I. Kryshkin, V.V. Skvortsov, A.N. Sytin, N.A. Kuz’min, S.Ya. Sychkov, 2010, published in Pribory i Tekhnika Eksperimenta, 2010, No. 2, pp. 16–19.
Rights and permissions
About this article
Cite this article
In’shakov, V.I., Kryshkin, V.I., Skvortsov, V.V. et al. Development of the active element for detectors based on thick gas electron multipliers. Instrum Exp Tech 53, 172–174 (2010). https://doi.org/10.1134/S002044121002003X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S002044121002003X