Abstract
Biosorption potential of hen feathers (HFs) to remove methylene blue (MB) from aqueous solutions was investigated. Batch experiments were carried out as function of different process parameters such as pH, initial dye concentration, biosorbent dose and temperature. The optimum conditions for removal of MB were found to be pH 7.0, biosorbent dose = 1.0 g, and initial dye concentration = 50 mg L−1. The temperature had a strong influence on the biosorption process. Experimental biosorption data were modeled by Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherms with the Langmuir isotherm showing the best fit at all temperatures studied. The maximum monolayer sorption capacity was determined as 134.76 mg g−1 at 303 K. According to the mean free energy values of sorption (E) calculated using the D–R isotherm model, biosorption of MB onto HFs was chemisorption. Kinetic studies showed that the biosorption of MB followed pseudo second-order kinetics. The activation energy (Ea) determined using the Arrhenius equation confirmed that the biosorption involved chemical ion-exchange. Thermodynamic studies showed that the biosorption process was spontaneous and exothermic. To conclude, HFs is a promising biosorbent for MB removal from aqueous solutions.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
The contamination of water bodies by synthetic dyes has created a serious environmental problem worldwide. A considerable amount of dyes is released into the aquatic ecosystems through the wastewater streams of industries such as textile, carpet, leather, paper, printing, food, cosmetics, paint, pigments, petroleum, solvent, rubber, plastic, pesticide etc. (Chowdhury et al. 2011a; Chowdhury and Saha 2010a). Dye residues affect photosynthetic activity by preventing light penetration in aquatic life and produce toxic chemicals of aromatics, metals, amines and chlorides, having a detrimental effect on flora, fauna and human beings.
Methylene blue (MB), a thiazine (cationic) dye, is commonly used for dyeing of silk, leather, plastics, paper, cotton mordanted with tannin, and also in manufacturing of paints and printing inks (Nasuha et al. 2010). It finds application in aquaculture as an alternative to malachite green for the treatment of fungal infections. In the dairy industry, it is used to determine the microbial load in the milk (Bapat et al. 2006). Although MB is not hazardous compared to other commercial dyes, acute exposure to MB can cause increased heart rate, vomiting, diarrhea, nausea and shock (Nasuha et al. 2010; ALzaydien 2009). It can cause eye burns which may lead to permanent injury to the eyes of human and animals (Rafatullah et al. 2010). On inhalation, it can give rise to short periods of rapid or difficult breathing (dyspnea), while ingestion through mouth produces a burning sensation (Rafatullah et al. 2010; Tan et al. 2008). Potential exposure to MB can also cause hypertension, pre-cordial pain, dizziness, headache, fever, fecal discoloration, profuse sweating, mental confusion, methemoglobinemia and hemolytic anemia (Saha 2009; Saha and Datta 2009; Ghosh and Bhattacharyya 2002;). Hence, there is a necessity for the treatment of effluents containing such dye due to its harmful impacts on receiving waters.
In recent years, biosorption has been strongly recommended as an economically viable sustainable technology for the treatment of wastewater streams (Chowdhury et al. 2011b). The importance and usefulness of biosorption in wastewater treatment is well established (Chowdhury et al. 2011b). Biosorption in environmental engineering is now an aesthetic attention and consideration in all nations, owing to its low initial cost, simplicity of design, ease of operation, insensitivity to toxic substances and complete removal of pollutants even from dilute solutions (Foo and Hameed 2010). A huge number of low-cost biosorbents based on natural materials or agro-industrial wastes such as rice husk (Saha 2009), tamarind fruit shell (Saha 2010), wheat shell (Bulut and Aydin 2006), orange peel (Annadurai et al. 2002), banana peel (Annadurai et al. 2002), pineapple leaves (Weng et al. 2009), pineapple stem (Hameed et al. 2009), peanut hull (Gong et al. 2005), garlic peel (Hameed and Ahmad 2009), rejected tea (Nasuha et al. 2010), Luffa cylindrical fibers (Demir et al. 2008), yellow passion fruit waste (Pavan et al. 2008), neem leaf powder (Bhattacharyya and Sharma 2005) etc. have been investigated intensively by researchers worldwide for the removal of MB from aqueous solutions. In recent years, researchers have focused on the application of biomaterials that are capable of biosorbing dyes from wastewaters. Biological materials such as peat, chitosan, yeast, fungi and bacterial biomass, have been used as biosorbents to concentrate and remove dyes from solutions (Srinivasan and Viraraghavan 2010). In this paper, we report the biosorption characteristics of hen feathers (HFs)—a waste biomaterial for the removal of MB from aqueous solution.
Feathers (chicken/hen) are generated in huge quantities as waste product at commercial poultry processing plants. Worldwide, nearly 8.5 billion tonnes of feathers are generated annually as waste by poultry-processing industries, of which India’s contribution alone is 350 million tonnes (Agrahari and Wadhwa 2010). The feathers are either used as animal feed supplement in the form of feather meal, for land filling, incinerated or buried, which involves storage, handling, emission control and ash disposal problems (Taskin and Kurbanoglu 2011; Agrahari and Wadhwa 2010). Feathers are composed mainly of keratin, a kind of self organized protein with high mechanical stability (Zaghloul et al. 2011). Keratin has a high content of the amino acids glycine, alanine, serine, cysteine and valine (Taskin and Kurbanoglu 2011). These amino acids are responsible for the presence of a number of functional groups (carboxyl, hydroxyl and amine-groups) both on the backbone and the side chain of the polypeptide molecule, thereby rendering it an interesting physicochemical property for the sorption of organic/inorganic compounds (Aguayo-Villarreal et al. 2011). Till date, few studies have proved feathers to be effective and economically feasible to remove several pollutants including dyes from aqueous solutions (Mittal et al. 2007). However, to the best of our knowledge, no study has been reported on the removal of MB using hen feathers. Thus, our primary aim was to investigate and explore the possibility of using HFs as biosorbent for the removal of MB from aqueous solutions. The study includes an evaluation of the effect of various operational parameters such as solution pH, initial dye concentration, biosorbent dose and reaction temperature on the dye biosorption process with special focus on biosorption isotherms, kinetics and thermodynamics.
Materials and methods
Dye
MB (C.I. 52015, FW: 319.86, MF: C16H18N3SCl) used in this study was of commercial purity and used without further purification. Stock dye solution (500 mg L−1) was prepared by dissolving 0.5 g of the dye in 1 L of distilled water. Experimental dye solution of desired concentration was prepared by further dilution of the stock solution with suitable volume of distilled water. The initial solution pH was adjusted with 0.1 M HCl and 0.1 M NaOH solutions using a digital pH meter (LI 127, ELICO, India) calibrated with standard buffer solutions.
Biosorbent
Hen feathers used in this study were collected from a local poultry in Durgapur, West Bengal, India. The feathers were first washed with detergent and rinsed thoroughly with distilled water to remove adhering dirt and any unwanted particles. They were then washed with aqueous ethanol (20 % v/v) to remove organic residues, and then rinsed again with distilled water. The washed feathers were then air dried and the barbs were cut into about 0.5 cm length with the help of scissors, discarding the hard middle rachis. Finally, the prepared biosorbent was stored in sterile, air tight glass bottles and used without any further treatment for dye biosorption.
Biosorbent characterization
Specific surface area (Ssp, m2 g−1) of the biosorbent was determined by Brunauer, Emmett, Teller (BET) method using a surface area and porosity analyzer (NOVA 2200, Quantachrome Corporations, USA). A gas mixture of 22.9 mol% nitrogen and 77.1 mol% helium was used for this purpose. The surface structure of the biosorbent was analyzed by a scanning electron microscope (S-3000 N, Hitachi, Japan) at an electron acceleration voltage of 15 kV. Prior to scanning, the biosorbent was mounted on a stainless steel stab with double stick tape and coated with a thin layer of gold in a high vacuum condition. An XRD spectrum of the biosorbent was also recorded using Miniflex X-ray diffraction spectrometer with a CuKα radiation source (used at 30 kV and 15 mA, diffraction angle ranged from 60° to 5° with a scan speed of 5°/min).
Batch biosorption
Batch mode biosorption experiments were performed in 250 mL glass-stoppered, Erlenmeyer flasks with 100 mL of dye solution of known initial concentration (50 mg L−1). A weighed amount (1 g) of biosorbent was added to the solution. The flasks were agitated at a constant speed of 150 rpm for 3 h in an incubator shaker (Model Innova 42, New Brunswick Scientific, Canada) at 303 ± 1 K. The influence of pH (2.0–10.0), initial dye concentration (20–100 mg L−1), biosorbent dose (0.5–5 g) and temperature (303–323 K) were evaluated during the present study. Samples were collected from the flasks at regular time intervals and the residual dye concentration in the solution was analyzed by monitoring the change in absorbance values at maximum wavelength (λmax) of 663 nm using UV/Vis spectrophotometer (U-2800, Hitachi, Japan).
Control experiments were conducted in two ways: (1) without biosorbent, to check for the retention of the dye at the glassware surface and other possible losses, and (2) without the dye (in double distilled water), to verify if any colored species present in the feathers were water soluble and would contribute to the color of water, masking in the results. Dye loses at the glassware surface was negligible and no significant color effect could be accounted to the feathers.
Calculations
The amount of dye adsorbed per unit biosorbent (mg dye/g of biosorbent) was calculated according to a mass balance on the dye concentration using Eq. (1):
where C0 is the initial dye concentration (mg L−1), Ce the equilibrium dye concentration in solution (mg L−1), V the volume of the solution (L), and m is the mass of the biosorbent in g. The percent removal (%) of dyes was calculated using the following equation:
Statistical analysis
In order to ensure the accuracy, reliability, and reproducibility of the collected data, all biosorption experiments were performed in triplicate, and the mean values were used in data analysis. Relative standard deviations were found to be within ±3 %. Microsoft Excel 2007 program was employed for data processing.
In a biosorption study, it is necessary to fit the equilibrium biosorption data using different biosorption isotherm models and kinetic equations in order to analyze and design a biosorption process. Therefore, different theoretical models (Table 1) were applied to the experimental data. Non-linear regression analysis using Origin Pro 8.0 software was employed to determine the isotherm parameters and kinetic constants.
Results and discussion
Biosorbent characterization
The specific surface area of the biosorbent (Ssp, m2 g−1) as obtained by BET measurements was 557.9 m2 g−1. SEM micrograph of the biosorbent material (Fig. 1) shows a very large surface area that could possibly facilitate the entrapment and subsequent biosorption of MB by the surface functional groups. Figure 2 shows the diffraction pattern of HFs. Two distinct peaks are observed at 2θ = 9.3° and 19.2° respectively, both indicative of semi-crystalline keratin. The peak at 2θ = 9.3° can be attributed to α-helix conformation of the protein molecule, while the peak at 2θ = 19.2° is due to the presence of stranded β-sheet structure. The results of XRD analysis are in accordance with those reported previously by Aguayo-Villarreal et al. 2011 for chicken feathers.
Effect of pH
Solution pH is an important monitoring parameter influencing the sorption behavior of adsorbate onto biosorbent surface due to its impact on both the surface binding-sites of the biosorbent and the dye solution chemistry. In the present study, the effect of pH on biosorption of MB onto HFs was studied over a pH range of 2–10. Results are shown in Fig. 3. The amount of dye removed at equilibrium increases with increasing pH, appreciably up to pH 6.0. With further increase in pH, there is no significant increase in the amount of dye removed. Maximum removal is observed at pH 7.0. Hence, all further experiments were carried out at pH 7.0.
The pH of the aqueous solution affects both the surface charge of the biosorbent material as well as the degree of ionization of the dye molecule. Feathers mainly contain N–H, C=O and C–H functional groups on their surface (Aguayo-Villarreal et al. 2011). Protonation of these functional groups at low pH values renders a net negative charge to the biosorbent surface while deprotonation of the functional groups at high pH values render it positively charged. The pKa of MB is 0.04 (Weng et al. 2009); hence, it is completely ionized at pH >0.04 and exists as cationic species. At low pH values, there exists a strong electronegative repulsion between the positively charged dye ions and the negatively charged HF surface resulting in low dye uptake capacity. On the contrary, as the pH of the dye solution increases, a considerable increase in adsorptive removal of dye is observed due to strong electrostatic attraction between negatively charged sites on the biosorbent and the dye cations. Similar results were previously reported for biosorption of MB from aqueous solution onto garlic peel (Hameed and Ahmad 2009), neem leaf powder (Bhattacharyya and Sharma 2005) and yellow passion fruit peel (Pavan et al. 2008).
Effect of biosorbent dose
Biosorbent dose is an important parameter influencing the biosorption process since it determines the biosorption capacity of a biosorbent for a given initial concentration of the adsorbate under the operating conditions. Therefore, the effect of biosorbent dose on biosorption of MB by HFs was investigated. The amount of biosorbent was varied from 0.50 to 5.00 g in 100 mL dye solution, while all the other variables such as pH, agitation speed, contact time, and temperature were kept constant. Data obtained from the experiments are presented in Fig. 4. With increase in biosorbent dose from 0.5 to 1 g, the dye removal efficiency increases from 85.76 to 97.02 %, which is probably due to an increase in the number of binding sites available for biosorption (Saeed et al. 2010; Ahmad 2009). Further increase in biosorbent dose reduces the percentage removal of MB. Such behavior can be attributed to saturation of the dye binding sites due to particulate interaction such as aggregation (Aksakal and Ucun 2010). Therefore, in the following experiments, the biosorbent dose was fixed at 1 g. These observations are in agreement with those reported previously by other researchers for the sorption of dyes by different sorbent materials (Aksakal and Ucun 2010; Crini et al. 2007).
Effect of initial dye concentration
Biosorption of MB onto HFs was also carried out at different initial dye concentrations (20, 40, 60, 80, and 100 mg L−1) and the results are shown in Fig. 5. It is clearly evident from the figure that the biosorption capacity increases with increasing initial dye concentration. Initial dye concentration provides an important driving force to overcome all mass transfer resistances of all molecules between the aqueous and solid phases (Chowdhury and Saha 2010a). Hence, a higher initial dye concentration of dye will enhance the biosorption process. A similar trend has been reported by Yao et al. (2009) for biosorption of MB by Xanthoceras sorbifolia seed coat.
Effect of temperature
Temperature has pronounced effect on the sorption removal of dyes from aqueous solutions. As such, the effect of temperature on the biosorption process of MB was studied in the range of 303–323 K and the results are depicted in Fig. 6. The figure shows that the dye uptake capacity decreases with increasing temperature. This finding suggests that MB uptake process was exothermic in nature. The negative correlation between temperature and dye biosorption capacity may be due to the weakening of bonds between the dye molecules and the active site of the biosorbent (Chowdhury and Saha 2010a). Also with increasing temperature, the solubility of MB increases. Consequently, the interaction forces between the solute and the solvent are stronger than those between the solute and the biosorbent. As a result, the solute is more difficult to adsorb (Chowdhury and Saha 2010a). Similar findings have been reported for biosorption of MB by Brazil nut shells (de Oliveira Brito et al. 2010) and Ulothrix sp. (Dogar et al. 2010).
Biosorption isotherms
The analysis of a biosorption process depends on the equilibrium relationship between the adsorbate concentration in the liquid phase and that on the biosorbent’s surface at a given condition, called an isotherm. An isotherm is a thermodynamic basis of a biosorption separation processes and determines the extent to which a material can be adsorbed onto a particular surface (Chowdhury et al. 2011c). A variety of isotherms have been developed to describe equilibrium relationships. However, no single model is universally applicable; all involve assumptions which may or may not be valid in particular cases. In the present study, the two parameter isotherms of Freundlich, Langmuir and Dubinin–Radushkevich (D–R) were employed to study the biosorption process of MB onto HFs (Table 1).
The Langmuir, Freundlich and D–R isotherm model parameters determined using non-linear regression analysis are summarized in Table 2. To quantitatively compare the accuracy of the models, the correlation coefficients (R2) were also calculated and are also listed in Table 2. According to the R2 values in Table 2, the Langmuir isotherm model shows best fit to the equilibrium MB biosorption data than the other isotherm models at all studied temperatures (Fig. 7). The suitability of the Langmuir isotherm model suggests monolayer coverage of dye molecules on the biosorbent surface. The maximum MB biosorption capacity of HFs is 134.76 mg g−1 at 303 K. The value of the Freundlich constant n is significantly higher than unity at all the temperatures studied indicating that the MB biosorption behavior of HFs can be considered as favorable (Chowdhury et al. 2011b).
The D–R isotherm model constant β gives an idea about the mean free energy E (kJ mol−1) of sorption per mole of the adsorbate which in turn can give information about the type of sorption mechanism. E can be calculated using the relationship (Chakraborty et al. 2011):
If the magnitude of E is between 8 and 16 kJ.mol−1, the biosorption process is supposed to proceed via chemisorption, while for values of E < 8 kJ mol−1, the sorption process is of physical nature (Chakraborty et al. 2011). The estimated values of E for the present study were found to be >8 kJ mol−1 at all temperatures studied (Table 2) implying that the biosorption mechanism of MB on HFs involves chemical ion-exchange.
Biosorption kinetics
Biosorption kinetics is expressed as the solute removal rate, which in turn controls the residence time of the sorbate in the solid-solution interface. In addition, information on the kinetics of solute uptake rate is also required to select the optimum condition for full-scale batch sorption processes. Several sorption kinetic models have been established to describe the reaction order of sorption systems based on solution concentration. These include pseudo-first-order model, pseudo-second-order model, Weber and Morris sorption kinetic model, first-order reversible reaction model, external mass transfer model, first-order equation of Bhattacharya and Venkobachar, Elovich’s model and Ritchies’s equation (Chowdhury and Saha 2010b). However, the pseudo-first-order and pseudo-second-order kinetic models are the most well-liked model to study the sorption kinetics of dyes and have been widely used in the kinetic study of dye sorption using various kinds of sorbent materials (Chowdhury and Saha 2010b). By acknowledging their wide application and usefulness in sorption studies, the pseudo-first-order and pseudo-second-order kinetic models (Table 1) were used to study the kinetics of MB biosorption onto HFs in the present study.
The pseudo-first-order and pseudo-second-order rate constants (k1, k2, qe) determined using non-linear regression analysis along with the corresponding R2 values are listed in Table 3. As can be seen from Table 3, the low R2 (<0.90) values for the pseudo-first-order model indicate that this model was not suitable for describing the biosorption kinetics of MB. However, the relatively high R2 (>0.99) values for the pseudo-second-order model suggest that the ongoing biosorption process obeys pseudo-second-order kinetics at all studied temperatures. Also, as can be seen in Table 3, the calculated qe values (qe,cal) show good agreement with the experimental qe values (qe,exp), confirming that the biosorption of MB onto HFs follows the pseudo-second-order kinetic model. A comparison of the pseudo-second-order model with the experimental kinetic data is illustrated in Fig. 8. The applicability of the pseudo-second-order kinetic model indicates that the biosorption process of MB onto HFs is chemisorption and the rate-determining step is probably surface sorption. Similar phenomena have been observed for biosorption of MB by pineapple leaf powder (Weng et al. 2009) and rejected tea (Nasuha et al. 2010).
Activation energy
The activation energy (Ea) for biosorption of MB by HFs was determined using the Arrhenius equation (Chowdhury and Saha 2010a):
where k is the rate constant, A the Arrhenius constant, Ea the activation energy (kJ mol−1), R the gas constant (8.314 J mol−1K−1) and T is the temperature (K). The value of Ea for biosorption of MB by HFs, as estimated from the slope of the linear plot of lnk2 versus 1/T, was 72.79 kJ mol−1. The magnitude of Ea gives information on the nature of the sorption process, i.e., whether it is physical or chemical, with the values of Ea <40 kJ mol−1 corresponds to physisorption and higher values represent chemical reaction process (Chowdhury and Saha 2010a). As such it can be said that the biosorption process of MB onto HFs is chemisorption.
The Eyring equation was used to calculate the standard enthalpy (∆H#), and entropy of activation (∆S#) (Chowdhury et al. 2011a):
where k is the rate constant, kB the Boltzman constant (1.3807 × 10−23 J K−1), h the Plank constant (6.6261 × 10−34 J s), R the gas constant (8.314 J mol−1K−1) and T is the temperature (K). The values of ∆H# and ∆S# were calculated from the slope and intercept of the plot of \( \ln \,(k_{2} /T) \) versus 1/T and were found to be −75.38 kJ mol−1 for ∆H# and −143.61 J mol−1 K−1 for ∆S#. The negative value of ∆H# indicates exothermic nature of the biosorption process. The negative value of ∆S# suggests that biosorption of MB onto HFs is an associative mechanism (Chowdhury et al. 2011a).
The values of ∆H# and ∆S# were used to compute the free energy of activation (∆G#) from the relation:
The values of ∆G# were found to be −31.86, −30.43, and −28.99 kJ mol−1 at T = 303, 313, and 323 K, respectively. The negative values of ∆G# suggest that the energy was released in the biosorption reaction to convert reactants into products.
Biosorption thermodynamics
Thermodynamic consideration of a biosorption process is necessary to conclude whether the process is spontaneous or not. The Gibbs free energy change (∆G°) is a critical factor for determining the spontaneity of a process and can be computed by the classical Van’t Hoff equation (Chowdhury and Saha 2010a):
where R is the universal gas constant (8.314 J mol−1K−1), T is the absolute temperature (K) and KC is the distribution coefficient for biosorption defined as:
in which Ca is the equilibrium adsorbate concentration on the biosorbent (mg L−1) and Ce is the equilibrium adsorbate concentration in solution (mg L−1).
It is also known that ∆G° is a function of change in enthalpy (∆H°, kJ mol−1) as well as change in standard entropy (∆S°, J mol−1K−1) according to the following equation:
The values of ∆G° were estimated to be −22.71, −20.33 and −18.49 kJ mol−1 at T = 303, 313 and 323 K, respectively. The negative value of ∆G° at different temperatures indicates spontaneous nature of the biosorption process. Furthermore, decrease in the negative value of ∆G° with increasing temperature suggests that the biosorption process was more favorable at lower temperatures. ∆H° and ∆S° were determined from the intercept and slope of the plot of ∆G° versus T (Fig. 9). The value of ∆H° was calculated as −86.55 kJ mol−1, and −1.75 kJ mol−1 K−1 for ∆S°. The negative value of ∆H° is indicative of the fact that the biosorption reaction was exothermic. The negative value of ∆S° suggests that the process is enthalpy driven.
Comparison of HFs with other sorbents
A comparative study of the maximum dye uptake capacity of HFs has been carried out with other reported sorbents. The maximum amount of MB uptake by HFs has been compared to the maximum MB uptake capacity of other reported sorbents and is presented in Table 4. From Table 4 it is evident that the maximum sorption capacity of HFs for MB is comparable and moderately higher than that of many corresponding sorbent materials. Differences in dye uptake capacity are due to the differences in properties of each sorbent material such as structure, functional groups and surface area. The easy availability and cost effectiveness of HFs are some additional advantages, which make it better biosorbent for the removal of MB from aqueous solutions.
Conclusion
In this study, the efficacy of HFs as biosorbent for removal of MB from aqueous solutions was investigated. Batch mode biosorption studies indicate that the biosorption was strongly dependent on solution pH, initial dye concentration, biosorbent dose and reaction temperature. The equilibrium biosorption data obtained at different temperatures fitted well in the Langmuir isotherm model indicating monolayer biosorption on a homogeneous surface. The maximum monolayer biosorption capacity was found to be 134.76 mg g−1 at 303 K which is considerably higher than that of many other sorbent materials reported in the literature. The mean free energy (E) calculated from the D–R isotherm model as well as the activation energy (Ea) determined using the Arrhenius equation confirms that the biosorption involved chemical ion-exchange. Kinetic studies show that the MB removal followed pseudo-second-order rate equation, while thermodynamic studies suggest that the biosorption process was spontaneous and exothermic. Finally, it can be concluded that HFs, a common and easily available waste biomaterial can be used as an economical biosorbent for the removal of MB from aqueous solutions.
References
Agrahari S, Wadhwa N (2010) Degradation of chicken feather a poultry waste product by keratinolytic bacteria isolated from dumping site at Ghazipur Poultry Processing plant. Int J Poult Sci 9:482–489
Aguayo-Villarreal A, Bonilla-Petriciolet A, Hernandez-Montoya V, Montes-Moran MA, Reynel-Avila HE (2011) Batch and column studies of Zn2+ removal from aqueous solution using chicken feathers as sorbents. Chem Eng J 167:67–76
Ahmad R (2009) Studies on adsorption of crystal violet dye from aqueous solution onto coniferous pinus bark powder (CPBP). J Hazard Mater 171:767–773
Ahmad A, Rafatullah M, Sulaiman O, Ibrahim MH, Hashim R (2009) Scavenging behaviour of meranti sawdust in the removal of methylene blue from aqueous solution. J Hazard Mater 170:357–365
Aksakal O, Ucun H (2010) Equilibrium, kinetic and thermodynamic studies of the adsorption of textile dye (Reactive Red 195) onto pinus sylvestris L. J Hazard Mater 181:666–672
ALzaydien AS (2009) Adsorption of methylene blue from aqueous solution onto a low-cost natural Jordanian Tripoli. Am J Environ Sci 5:197–208
Annadurai G, Juang R, Lee D (2002) Use of cellulose-based wastes for adsorption of dyes from aqueous solutions. J Hazard Mater 92:263–274
Banat F, Al-Asheh S, Al-Ahmad R, Bni-Khalid F (2007) Bench-scale and packed bed sorption of methylene blue using treated olive pomace and charcoal. Bioresour Technol 98:3017–3025
Bapat P, Nandy SK, Wangikar P, Venkatesh KV (2006) Quantification of metabolically active biomass using methylene blue dye reduction test (MBRT): measurement of CFU in about 200 s. J Microbiol Methods 65:107–116
Bhattacharyya KG, Sharma A (2005) Kinetics and thermodynamics of methylene blue adsorption on neem (Azadirachta indica) leaf powder. Dyes Pigments 65:51–59
Blanchard G, Maunaye M, Martin G (1984) Removal of heavy metals from waters by means of natural zeolites. Water Res 18:1501–1507
Bulut Y, Aydin HA (2006) Kinetics and thermodynamics study of methylene blue adsorption on wheat shells. Desalination 194:259–267
Chakraborty S, Chowdhury S, Saha PD (2011) Adsorption of crystal violet from aqueous solution onto NaOH-modified rice husk. Carbohydr Polym 84:1533–1541
Chowdhury S, Saha P (2010a) Sea shell powder as a new adsorbent to remove Basic Green 4 (Malachite Green) from aqueous solutions: equilibrium, kinetic and thermodynamic studies. Chem Eng J 164:168–177
Chowdhury S, Saha P (2010b) Pseudo-second-order kinetic model for biosorption of methylene blue onto tamarind fruit shell: comparison of linear and non-linear methods. Biorem J 14:196–207
Chowdhury S, Mishra R, Saha P, Kushwaha P (2011a) Adsorption thermodynamics, kinetics and isosteric heat of adsorption of malachite green onto chemically modified rice husk. Desalination 265:159–168
Chowdhury S, Chakraborty S, Saha P (2011b) Biosorption of Basic Green 4 from aqueous solution by Ananas comosus (pineapple) leaf powder. Colloids Surf B 84:520–527
Chowdhury S, Mishra R, Kushwaha P, Das P (2011c) Optimum sorption isotherm by linear and non-linear methods for safranin onto alkali treated rice husk. Biorem J 15:77–89
Crini G, Peindy HN, Gimbert F, Robert C (2007) Removal of C. I. Basic Green 4 (Malachite Green) from aqueous solution by adsorption using cyclodextrin-based adsorbent. Sep Purif Technol 53:97–110
de Oliveira Brito SM, Andrade HMC, Soares LF, de Azevedo RP (2010) Brazil nut shells as a new biosorbent to remove methylene blue and indigo carmine from aqueous solutions. J Hazard Mater 174:84–92
Demir H, Top A, Balkose D, Ulku S (2008) Dye adsorption behavior of Luffa cylindrica fibers. J Hazard Mater 153:389–394
Dogar C, Gürses A, Acıkyıldız M, Özkan E (2010) Thermodynamics and kinetic studies of biosorption of a basic dye from aqueous solution using green algae Ulothrix sp. Colloids Surf B 76:279–285
Dubinin MM, Radushkevich LV (1947) The equation of the characteristic curve of the activated charcoal. Proc Acad Sci USSR Phys Chem Sect 55:331–337
Ferrero F (2007) Dye removal by low cost adsorbents: hazelnut shells in comparison with wood sawdust. J Hazard Mater 142:144–152
Foo KY, Hameed BH (2010) Insights into the modeling of adsorption isotherm systems. Chem Eng J 156:2–10
Freundlich HMF (1906) Over the adsorption in solution. J Phys Chem 57:385–470
Garg VK, Amita M, Kumar R, Gupta R (2004) Basic dye (methylene blue) removal from simulated wastewater by adsorption using Indian rosewood sawdust: a timber industry waste. Dyes Pigments 63:243–250
Ghosh D, Bhattacharyya KG (2002) Adsorption of methylene blue on kaolinite. Appl Clay Sci 20:295–300
Gong R, Li M, Yang C, Sun Y, Chen J (2005) Removal of cationic dyes from aqueous solution by adsorption on peanut hull. J Hazard Mater 121:247–250
Hameed BH, Ahmad A (2009) Batch adsorption of methylene blue from aqueous solution by garlic peel, an agricultural waste biomass. J Hazard Mater 164:870–875
Hameed BH, Krishni RR, Sata SA (2009) A novel agricultural waste adsorbent for the removal of cationic dye from aqueous solutions. J Hazard Mater 162:305–311
Han R, Zou W, Yu W, Cheng S, Wang Y, Shi J (2007) Biosorption of methylene blue from aqueous solution by fallen phoenix tree’s leaves. J Hazard Mater 141:156–162
Lagergren S (1898) About the theory of so-called adsorption of soluble substances. K. Sven Vetenskapsakad Handl 24:1–39
Langmuir I (1916) The constitution and fundamental properties of solids and liquids. J Am Chem Soc 38:2221–2295
Low KS, Lee CK (1990) The removal of cationic dyes using coconut husk as an absorbent. Pertanika 13:221–228
Mittal A, Kurup L, Mittal J (2007) Freundlich and Langmuir isotherms and kinetics for the removal of Tartrazine from aqueous solutions using hen feathers. J Hazard Mater 146:242–248
Nasuha N, Hameed BH, Din ATM (2010) Rejected tea as a potential low-cost adsorbent for the removal of methylene blue. J Hazard Mater 175:126–132
Oladoja NA, Asia IO, Aboluwoye CO, Oladimeji YB, Ashogbon AO (2008) Studies on the sorption of basic dye by rubber (Hevea brasiliensis) seed shell. Turk J Eng Environ Sci 32:143–152
Oliveira LS, Franca AS, Alves TM, Rocha SDF (2008) Evaluation of untreated coffee husks as potential biosorbents for treatment of dye contaminated waters. J Hazard Mater 155:507–512
Ozer D, Dursun G, Ozer A (2007) Methylene blue adsorption from aqueous solution by dehydrated peanut hull. J Hazard Mater 144:171–179
Pavan FA, Lima EC, Dias SLP, Mazzocato AC (2008) Methylene blue biosorption from aqueous solutions by yellow passion fruit waste. J Hazard Mater 150:703–712
Rafatullah M, Sulaiman O, Hashim R, Ahmad A (2010) Adsorption of methylene blue on low-cost adsorbents: a review. J Hazard Mater 177:70–80
Saeed A, Sharif M, Iqbal M (2010) Application potential of grapefruit peel as dye sorbent: Kinetics, equilibrium and mechanism of crystal violet adsorption. J Hazard Mater 179:564–572
Saha P (2009) Study on the removal methylene blue dye using chemically treated rice husk. Asian J Water Environ Pollut 7:31–41
Saha P (2010) Assessment on the removal of methylene blue dye using tamarind fruit shell as biosorbent. Water Air Soil Pollut 213:287–299
Saha P, Datta S (2009) Assessment on thermodynamics and kinetics parameters on reduction of methylene blue using fly ash. Desalin Water Treat 12:219–228
Sharma, YC, Uma, Upadhyay SN (2009) Removal of a cationic dye from wastewaters by adsorption on activated carbon developed from coconut coir. Energy Fuels 23:2983–2988
Srinivasan A, Viraraghavan T (2010) Decolorization of dye wastewaters by biosorbents: a review. J Environ Manage 91:1915–1929
Tan IAW, Ahmad AL, Hameed BH (2008) Adsorption of basic dye using activated carbon prepared from oil palm shell: batch and fixed bed studies. Desalination 225:13–28
Taskin M, Kurbanoglu EB (2011) Evaluation of waste chicken feathers as peptone source for bacterial growth. J Appl Microbiol 111:826–834
Tsai WT, Yang JM, Lai CW, Cheng YH, Lin CC, Yeh CW (2006) Characterization and adsorption properties of eggshells and eggshell membrane. Bioresour Technol 97:488–493
Vadivelan V, Kumar KV (2005) Equilibrium, kinetics, mechanism, and process design for the sorption of methylene blue onto rice husk. J Colloid Interface Sci 286:90–100
Weng C-H, Lin Y-T, Tzeng T-W (2009) Removal of methylene blue from aqueous solution by adsorption onto pineapple leaf powder. J Hazard Mater 170:417–424
Yao Z, Wang L, Qi J (2009) Biosorption of methylene blue from aqueous solution using a bioenergy forest waste: Xanthoceras sorbifolia seed coat. Clean Soil Air Water 37:642–648
Zaghloul TI, Embaby AM, Elmahdy AR (2011) Biodegradation of chicken feathers waste directed by Bacillus subtilis recombinant cells: scaling up in a laboratory scale fermentor. Bioresour Technol 102:2387–2393
Open Access
This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution and reproduction in any medium, provided the original author(s) and the source are credited.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Chowdhury, S., Saha, P.D. Biosorption of methylene blue from aqueous solutions by a waste biomaterial: hen feathers. Appl Water Sci 2, 209–219 (2012). https://doi.org/10.1007/s13201-012-0039-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13201-012-0039-0