Abstract
Our research on slimy sculpins (Cottus cognatus), a benthic, freshwater fish, requires highly polymorphic genetic markers, and microsatellite loci developed for other Cottus species were insufficient for our needs. We therefore developed 13 polymorphic microsatellite loci from C. cognatus libraries enriched for tri- and tetranucleotide repeats. These loci had 2–22 alleles and observed heterozygosities ranging from 0.36 to 0.86 in a sample of 47 individuals from one population. There was no evidence of linkage disequilibrium; however, one locus had a putative null allele. Twelve loci also worked for mottled sculpin (Cottus bairdi) but only eight were polymorphic in a sample of seven individuals.
Avoid common mistakes on your manuscript.
Slimy sculpins (Cottus cognatus) are small, freshwater, benthic fish widely distributed across Northern North America and Eastern Siberia. Their sedentary nature renders Cottus species ideal for population studies, and research on multiple species has revealed well-developed population structure (Meyer et al. 2008; Englbrecht et al. 2000). Cottus species have recently been indicated as ideal study organisms for investigating the early stages of speciation (Sweigart 2009) and there has been considerable interest in the behavior, ecology, phylogeography and conservation of these species (Adams and Schmetterling 2007). Current conservation efforts in Minnesota (USA) have included reintroducing C. cognatus into streams historically impacted by heavy agricultural land-use in order to rehabilitate the native fish fauna. Restoration activities have given researchers the opportunity to examine the consequences of local adaptation on the fitness of restored populations and aspects of genetic diversity indicators when multiple source populations are mixed. Currently available genetic markers are sufficient to differentiate C. cognatus populations used as sources (L. Miller, unpublished data); however, these microsatellite loci were developed for other Cottus species (Nolte et al. 2005; Fiumera et al. 2002; Englbrecht et al. 1999) and generally had low variation within C. cognatus populations. Our goal was to develop additional highly polymorphic loci to aid in parentage assignment for a study of factors that contribute to reproductive success at reintroduction sites.
Genomic DNA was extracted from C. cognatus organ tissue using a DNeasy blood and tissue kit (Qiagen) following the manufacturer’s instructions. We constructed libraries enriched for microsatellite repeats using a protocol developed by Glenn and Schable (2005). To summarize, we digested the genomic DNA with BstU I and Xmn I (New England Biolabs) then ligated SuperSNX linkers (Forward: 5′-GTTTAAGGCCTAGCTAGCAGAATC; Reverse: 5′-GATTCTGCTAGCTAGGCCTTAAACAAAA) to the digested fragments. We hybridized our DNA with a mixture of biotinylated oligonucleotide probes [(AGAT)8; (AAGT)8; (ACAT)8; (ACCT)6; (ACAG)6; (ATC)8; (AAC)6; (AAG)8; (ACT)12; (AGC)6] under high stringency conditions (52°C). Hybridized sequences were captured using Dynabeads® M-280 Streptavidin (Invitrogen), and then recovered through the polymerase chain reaction (PCR) with SuperSNX forward primer.
We used a pGEM®-T vector system (Promega) to clone the PCR-amplified enriched DNA pool. After plating and incubation on Ampicillin/X-Gal/IPTG LB agarose, putative transformants were identified by blue–white screening and 672 colonies were picked and PCR amplified. Amplified inserts were sized on 1% TBE agarose gels, and fragments larger than 550 base pairs (indicating inserts large enough to contain a repeat and flanking sequence for primer design) were identified. We submitted PCR products from 130 colonies to the BioMedical Genomics Center (University of Minnesota, St. Paul, MN) for sequencing using BigDye v3.1 chemistry and an ABI 3730xl DNA Analyzer (Applied Biosystems). Although a large percentage of sequences contained repeats, many were duplicated or had short or poor quality flanking sequence so they were unusable for primer design. We designed primer pairs from 19 sequences using the program Primer3 v. 0.4.0 (Rozen and Skaletsky 2000). Amplification with our primers yielded 13 unique, polymorphic microsatellite loci (Table 1). Two loci (Cco04 and Cco08) were scorable through separation on 8% acrylamide gels followed by ethidium bromide staining and visualization on a UV light table. We obtained fluorescently labeled forward primers for six loci and attached M13 tails to the forward primer of the remaining five loci according to Boutin-Ganache et al. (2001).
All loci were characterized using 47 C. cognatus from a single population. We extracted DNA from fin clips fixed in ethanol by mixing each with 300 μl of 5% Chelex® (Sigma Chemical) solution, incubating samples overnight in a water bath (56°C) then boiling for 8 min. Amplifications for Cco04 and Cco08 as well as the fluorescently labeled loci were performed in 15 μl reaction volumes consisting of 5 μl DNA template, 5X GoTaq® DNA polymerase buffer with 1.5 mM MgCl2 (Promega), 0.2 mM each dNTP, 0.33 μM of each primer, 0.5 U GoTaq® DNA polymerase, and water to the final reaction volume. In some cases additional MgCl2 was needed up to a final concentration of 2.5 mM. Amplifications using the M13 tailed primers were carried out in 15 μl reactions according to Boutin-Ganache et al. (2001) with the exception that the molar ratio between the M13 labeled primer and the M13-tailed forward primer was 4:1 instead of 15:1. Primer concentrations were as follows: 0.4 μM M13 labeled primer, 0.4 μM reverse primer, and 0.10 μM M13-tailed forward primer. Concentrations of all other reagents agreed with those conditions used for the other eight loci. Thermocycler conditions for amplification were a 3 min denaturation at 95°C, 35 cycles of 95°C for 30 s, primer annealing temperature (Table 1) for 30 s, and an extension at 72°C for 1 min, with a final extension at 72°C for 10 min. PCR products from the labeled and M13-tailed loci were resolved on an ABI 3730xl DNA Analyzer, and alleles sized using Genotyper 2.5 and LIZ 500 size standards (Applied Biosystems).
Our 13 microsatellite loci had 2–22 alleles and observed heterozygosities ranging from 0.36 to 0.86 (Table 1). We used the program HW-Quick Check (Kalinowski 2006) to calculate observed and expected heterozygosities and to detect deviations from Hardy–Weinberg Equilibrium (HWE). One locus (Cco07) deviated from HWE, with evidence for a null allele according to the program MicroChecker (Oosterhout et al. 2004). We found no evidence of linkage disequilibrium after Bonferroni correction using GENEPOP v4 (Raymond and Rousset 1995).
We also amplified all loci using seven individuals from two populations of mottled sculpin (Cottus bairdi), the only other Cottus species found in our study region. We used the same PCR conditions applied to C. cognatus except for an annealing temperature of 50°C for all loci. Eight of the loci were variable for C. bairdi, four loci appeared fixed, and one did not amplify (Table 2). Several of the loci have non-overlapping allele size ranges, at least for these few samples, and may prove useful for genetically confirming the identity of these morphologically similar species.
These new polymorphic microsatellite loci will be useful for investigations of C. cognatus population structure and processes. The amplification success of these markers on another species demonstrates that they may also be useful for research on other Cottus species.
References
Adams SB, Schmetterling DA (2007) Freshwater sculpins: phylogenetics to ecology. Trans Am Fish Soc 136:1736–1741
Boutin-Ganache I, Raposo M, Raymond M, Deschepper CF (2001) M13-tailed primers improve the readability and usability of microsatellite analyses performed with two different allele-sizing methods. BioTechniques 31:25–28
Englbrecht CC, Largiader CR, Hanfling B, Tautz D (1999) Isolation and characterization of polymorphic microsatellite loci in the European bullhead Cottus gobio L. (Osteichthyes) and their applicability to related taxa. Mol Ecol 8:1957–1969
Englbrecht CC, Freyhof J, Nolte A, Rassmann K, Schliewen U, Tautz D (2000) Phylogeography of the bullhead Cottus gobio (pisces: Teleostei: Cottidae) suggests a pre-Pleistocene origin of the major central European populations. Mol Ecol 9:709–722
Fiumera AC, Porter BA, Grossman GD, Avise JC (2002) Intensive genetic assessment of the mating system and reproductive success in a semi-closed population of the mottled sculpin, Cottus bairdi. Mol Ecol 11:2367–2377
Glenn TC, Schable NA (2005) Isolation microsatellite DNA loci. Methods Enzymol 395:202–222
Kalinowski ST (2006) HW-QUICKCHECK: an easy-to-use computer program for checking genotypes for agreement with Hardy–Weinberg expectations. Mol Ecol Notes 6:974–979
Meyer KA, Schill DJ, Campbell MR, Kozfkay CC (2008) Distribution, abundance, and genetic population structure of Wood River sculpin, Cottus leiopomus. West N Am Nat 68:508–520
Nolte AW, Stemshorn KC, Tautz D (2005) Direct cloning of microsatellite loci from Cottus gobio through a simplified enrichment procedure. Mol Ecol Notes 5:628–636
Oosterhout CV, Hutchinson WF, Wills DPM, Shipley P (2004) Micro-Checker: software for identifying and correcting genotyping errors in microsatellite data. Mol Ecol Notes 4:535–538
Raymond M, Rousset F (1995) GENEPOP (version 1.2): population genetics software for exact tests and ecumenicism. J Hered 86:248–249
Rozen S, Skaletsky HJ (2000) Primer3 on the WWW for general users and for biologist programmers. In: Krawetz S, Misnener S (eds) Bioinformatics methods and protocols: methods in molecular biology. Humana Press, Totowa, NJ, pp 365–386
Sweigart A (2009) Sculpin hybrid zones: natural laboratories for the early stages of speciation. Mol Ecol 18:2547–2548
Acknowledgments
This work is the result of research sponsored by the Minnesota Sea Grant Research Program supported by the NOAA office of Sea Grant, United States Department of Commerce, under grant No. R/F33-09. The U.S. Government is authorized to reproduce and distribute reprints for government purposes, not withstanding any copyright notation that may appear hereon. This paper is journal reprint No. 565 of the Minnesota Sea Grant College Program.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fujishin, L.M., Keith Barker, F., Huff, D.D. et al. Isolation of 13 polymorphic microsatellite loci for slimy sculpin (Cottus cognatus). Conservation Genet Resour 1, 429 (2009). https://doi.org/10.1007/s12686-009-9099-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12686-009-9099-3