Abstract
Warpage issues occurring during semiconductor package process present high probability of loose contacts during assembly processes of chips and package, which has become a critical cause that reduces process yield rates. Therefore, it is necessary to find the right package materials and package structure to minimize such warpage issues. This study performed and investigated the results of a finite-element analysis to find the method to reduce warpage and looked at the effect based on the selection of substrate materials and package structure. Moreover, the study tried to identify factors of, and conditions to minimize, significant effect on warpage by statistically analyzing experimental results based on RSM. According as the substrate and EMC thickness are larger, the warpage is tended to decrease. In addition, the smaller the die-pitch, tends to decrease the warpage. Warpage analysis is performed with respect to the optimal conditions, and it extracts an error of about 0.13 mm as compared with the experimental result. Thus, this analysis result is confirmed that similar to the experimental result.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kim, S. K., Kim, J. Y., Jung, H. D., and Kim, J. H., “Simulation of Thermal Fatigue under Different Mold Compound and Chip Size for Wafer Level Embedded Sip,” Proc. of Korean Society of Machine Tool Engineers Conference, pp. 108–112, 2009.
Kim, T. H., Park, S. W., Hong, J. P., Gao, S., Jeon, J. Y., et al., “Study of Via-Hole Process for Wafer Level Package,” Proc. of KSPE Autumn Conference, pp. 359–360, 2008.
Park, S. M., Lee, H. J., and Park, S.-J., “Warpage Analysis of Large-Area Fan-Out Molding Process,” Proc. of the KSMTE, p. 108, 2012.
Tessier, T. G., Dhaenens, M., Clark, D., Karila, T., and Waris, T., “Laminate based Fan-Out Embedded Die Technologies: The Other Option,” Proc. of IWLPC Conference, 2010.
Fan, X., “Wafer Level Packaging (WLP): Fan-In, Fan-Out and Three-Dimensional Integration,” Proc. of 11th International Conference on Thermal, Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems, pp. 1–7, 2010.
Lee, M. K., Choa, S. H., Jeong, J. W., and Ock, J. Y., “Study of Fan-Out Wafer Level Package to Optimize the Warpage,” Proc. of KSPE Spring Conference, pp. 669–670, 2013.
Yim, M. J., Strode, R., Brand, J., Adimula, R., Zhang, J. J., and Yoo, C., “Ultra-Thin Pop Top Package using Compression Mold: Its Warpage Control,” Proc. of IEEE 61st Electronic Components and Technology Conference (ECTC), pp. 1141–1146, 2011.
Khong, C. H., Kumar, A., Zhang, X., Sharma, G., Vempati, S. R., et al., “A Novel Method to Predict Die Shift during Compression Molding in Embedded Wafer Level Package,” Proc. of Electronic Components Technology Conference, pp. 535–541, 2009.
Kwon, K.-B. and Shin, D.-Y., “Optimal Design of a Mini-Loader based on the Design of Experiments,” Transactions of the Korean Society of Mechanical Engineers A, Vol. 35, No. 6, pp. 693–699, 2011.
Lee, S.-H., Choi, S.-D., Kim, G.-M., and Lee, J.-H., “Study on the Bonding Property and Strength Evaluation in Bonding Interface Joints of Dissimilar Material using Response Surface Analysis,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 2, pp. 76–82, 2009.
Kim, Y., Kim, P., Lee, J., and Seok, J., “Characterization and Parameter Optimization of a Microcellular Polypropylene Electret under an External Inertial Load,” Int. J. Precis. Eng. Manuf., Vol. 10, No. 5, pp. 97–106, 2009.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, HJ., Park, SM. & Park, SJ. Minimization of warpage for wafer level package using response surface method. Int. J. Precis. Eng. Manuf. 17, 1201–1207 (2016). https://doi.org/10.1007/s12541-016-0144-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-016-0144-3