Abstract
A new design analysis method based on FEM and a topology optimization for piezoelectric materials was developed for the unimorph cantilevered energy harvesters which can produce the maximum electric power outputs. The optimum topology of a piezoelectric material layer on the harvesting beam has been calculated by considering natural frequencies of beams, electromechanical couplings of piezoelectric materials, tip masses and MMA (method of moving asymptotes). The piezoelectric coefficients such as elasticity, capacitance and piezoelectric coupling were interpolated by element density variables in the topology optimization. The optimum design method was verified by vibration tests and measuring voltage outputs of the harvester and a good correlation between two results has been obtained. The effects of beam geometric parameters and several piezoelectric materials (PZT, PVDF, PMN-PT and piezoelectric fiber composites) on power generation were also investigated. The beam with PMN-PT generated the largest voltage and the next largest is PZT, MFC and PVDF, respectively.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Roundy, S., Wright, P. K., and Rabaey, J. M., “Energy scavenging for wireless sensor networks: With special focus on vibrations,” Kluwer Academic Publishers, 2004.
Jones, P. G., Beeby, S. P., and White, N. M., “Towards a piezoelectric vibration-powered microgenerator,” Proc. of IEEE Science, Measurement and Technology, Vol. 148, No. 2, pp. 68–72, 2001.
Sterken, T., Baert, K., van Hoof, C., Puers, R., Borghs, G., and Fiorini, P., “Comparative modelling for vibration scavengers [MEMS energy scavengers],” Proc. of IEEE in Sensors, Vol. 1243, pp. 1249–1252, 2004.
Roundy, S., Wright, P. K., and Rabaey, J., “A study of low level vibrations as a power source for wireless sensor nodes,” Computer Communications, Vol. 26, No. 11, pp. 1131–1144, 2003.
Beeby, S. P., Tudor, M. J., and White, N. M., “Energy harvesting vibration sources for microsystems applications,” Measurement Science and Technology, Vol. 17, No. 12, pp. R175–R195, 2006.
Hu, H. P., Zhao, C., Feng, S. Y., Hu, Y. T., and Chen, C. Y., “Adjusting the resonant frequency of a PVDF bimorph power harvester through a corrugation-shaped harvesting structure,” Proc. of IEEE Ultrasonics, Ferroelectrics, and Frequency control, Vol. 55, No. 3, pp. 668–674, 2008.
Erturk, A. and Inman, D. J., “On mechanical modeling of cantilevered piezoelectric vibration energy harvesters,” Journal of Intelligent Material Systems and Structures, Vol. 19, No. 11, pp. 1311–1325, 2008.
Erturk, A. and Inman, D. J., “A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters,” Journal of Vibration and Acoustics, Vol. 130, No. 4, 2008.
Karami, M. A., Bilgen, O., Inman, D. J., and Friswell, M. I., “Experimental and analytical parametric study of single-crystal unimorph beams for vibration energy harvesting,” Proc. of IEEE Ultrasonics, Ferroelectrics, and Frequency control, Vol. 58, No. 7, pp. 1508–1520, 2011.
Bilgen, O., Karami, M. A., Inman, D. J., and Friswell, M. I., “The actuation characterization of cantilevered unimorph beams with single crystal piezoelectric materials,” Smart Materials & Structures, Vol. 20, No. 5, 2011.
Kim, M., Hoegen, M., Dugundji, J., and Wardle, B. L., “Modeling and experimental verification of proof mass effects on vibration energy harvester performance,” Smart Materials & Structures, Vol. 19, No. 4, 2010.
Yang, Y. W., Tang, L. H., and Li, H. Y., “Vibration energy harvesting using macro-fiber composites,” Smart Materials & Structures, Vol. 18, No. 11, 2009.
Yoon, H. S., Washington, G., and Danak, A., “Modelling, optimisation, and design of efficient initially curved piezoelectric unimorphs for energy harvesting application,” Journal of Intelligent Material Systems and Structures, Vol. 16, No. 10, pp. 877–888, 2005.
Dietl, J. M. and Garcia, E., “Beam shape optimization for power harvesting,” Journal of Intelligent Material Systems and Structures, Vol. 21, No. 6, pp. 633–646, 2010.
Zheng, B., Chang, C. J., and Gea, H. C., “Topology optimization of energy harvesting devices using piezoelectric materials,” Structural and Multidisciplinary Optimization, Vol. 38, No. 1, pp. 17–23, 2009.
Rupp, C. J., Evgrafov, A., Maute, K., and Dunn, M. L., “Design of piezoelectric energy harvesting systems: A topology optimization approach based on multilayer plates and shells,” Journal of Intelligent Material Systems and Structures, Vol. 20, No. 16, pp. 1923–1939, 2009.
Kim, J. E., Kim, D. S., Ma, P. S., and Kim, Y. Y., “Multi-physics interpolation for the topology optimization of piezoelectric systems,” Computer Methods in Applied Mechanics and Engineering, Vol. 199, No. 49–52, pp. 3153–3168, 2010.
Kang, Z. and Wang, X.M., “Topology optimization of bending actuators with multilayer piezoelectric material,” Smart Materials & Structures, Vol. 19, No. 7, 2010.
Park, J., Lee, S., and Kwak, B. M., “Design optimization of piezoelectric energy harvester subject to tip excitation,” Journal of Mechanical Science and Technology, Vol. 26, No. 1, pp. 137–143, 2012.
American National Standards Institute, “IEEE standard on piezoelectricity,” ANSI/IEEE Std. 176-1987, 1988.
Kogl, M. and Silva, E. C. N., “Topology optimization of smart structures: Design of piezoelectric plate and shell actuators,” Smart Materials & Structures, Vol. 14, No. 2, pp. 387–399, 2005.
Bendsoe, M. P. and Sigmund, O., “Topology optimization: Theory, methods and applications,” Springer, pp. 4–8, 2003.
Lee, J., “Topology optimization algorithm of piezo-composite materials on the cantilevered energy harvester,” M. Sc. Thesis, Department of mechanical engineering, Kyungpook National University, 2012.
Williams, R. B., Park, G., Inman, D. J., and Wilkie, W. K., “An overview of composite actuators with piezoceramic fibers,” Proc. of 20th International Modal Analysis Conference, pp. 421–427, 2002.
Deraemaeker, A., Nasser, H., Benjeddou, A., and Preumont, A., “Mixing rules for the piezoelectric properties of macro fiber composites,” Journal of Intelligent Material Systems and Structures, Vol. 20, No. 12, pp. 1475–1482, 2009.
Lee, J. and Choi, B., “A study on the piezoelectric energy conversion system using motor vibration,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 4, pp. 573–579, 2012.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, C., Shin, JW. Topology optimization of piezoelectric materials and application to the cantilever beams for vibration energy harvesting. Int. J. Precis. Eng. Manuf. 14, 1925–1931 (2013). https://doi.org/10.1007/s12541-013-0261-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-013-0261-1