Abstract
Green composites possessing biodegradable or recyclable characteristics have gained interest in recent years due to their ecofriendly, sustainable and lightweight characteristics over the conventional plastic-based materials. In this study, flax and jute natural fibers have been used individually and as hybrid reinforcement into Poly Lactic Acid (PLA) matrix. The composites developed are suitable to be used in biodegradable products in packaging and automobile industries. Hot press compression molding was used to fabricate samples of PLA/flax, PLA/jute and PLA/flax/jute (hybrid composites). The concentration of natural fibers in individual fiber-based composites was varied (between 0–50 %) by weight to investigate its effect on tensile and impact properties. Maximum tensile properties were obtained for 40 wt% single-fiber reinforced into PLA. This reinforcement content (40 wt%) was used as reference for hybrid composites. Hybrid composites were fabricated with different combinations of jute and flax fibers by keeping the total concentration of reinforcement equal to 40 % by weight. Tensile and Charpy impact tests were performed to evaluate the mechanical properties of the composites. Scanning Electron Microscopy of the tensile fractured surfaces was performed to observe the failure mechanism and adhesion at fibermatrix interfaces in the composites. Further characterizations included Fourier Transform Infra-Red spectroscopy and Biodegradability tests, which were performed according to ASTM standards. Fourier Transform Infrared analysis revealed interaction between the natural fibers (jute and flax) and PLA matrix in hybrid composites. The enhanced interaction in hybrid composites resulted in their improved impact resistance. Based on the results obtained in this study, the improved mechanical and biodegradable properties of these composites make it suitable for use in applications like food-packaging and indoor plastic products in automobiles, to reduce synthetic plastic pollution.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Z. Sun, L. Zhang, D. Liang, W. Xiao, and J. Lin, Int. J. Polym. Sci., 2017, 1 (2017).
R. M. Bajracharya, D. S. Bajwa, and S. G. Bajwa, Procedia Eng., 200, 370 (2017).
R. Ranjan, P. K. Bajpai, and R. K. Tyagi, Eng. Int., 1, 39 (2013).
K. Okubo, T. Fujii, and E. T. Thostenson, Compos Part A-Appl. S., 40, 469 (2009).
E. Hassan, Y. Wei, H. Jiao, and Y. M. Huo, Int. J. Eng. Sci. Technol., 4 (2012).
P. K. Bajpai, I. Singh, and J. Madaan, J. Thermoplast., 27, 52 (2012).
C. Nyambo, A. K. Mohanty, and M. Misra, Biomacromolecules, 11, 1654 (2010).
Y. Cheng, S. Deng, P. Chen, and R. Ruan, Front. Chem. China, 4, 259 (2009).
R. Mehta, V. Kumar, H. Bhunia, and S. N. Upadhyay, J. Macromol. Sci., Polym. Rev., 45, 325 (2005).
M. S. Huda, L. T. Drzal, M. Misra, A. K. Mohanty, K. Williams, and D. F. Mielewski, Ind. Eng. Chem. Res., 44, 5593 (2005).
I. Widiastuti, Ph. D. Dissertation, IRIS, Melbourne, 2014.
R. Siakeng, M. Jawaid, H. Ariffin, S. M. Sapuan, M. Asim, and N. Saba, Polym. Compos., 40, 446 (2018).
A. Sangregorio, N. Guigo, J. C. van der Waal, and N. Sbirrazzuoli, Compos. Sci. Technol., 171, 70 (2019).
A. Q. Dayo, A. A. Babar, Q.-R. Qin, S. Kiran, J. Wang, A. H. Shah, A. Zegaoui, H. A. Ghouti, and W.-B. Liu, Compos. Part A-Appl. S., 128 (2019).
F. A. T. Owolabi, A. G. Deepu, T. Sabu, J. Shima, R. Samsul, N. A. Sri Aprilia, and H. P. S. Abdul Khalil, “Encyclopedia of Renewable and Sustainable Materials”, 1st ed. (S. Hashmi and I. A. Choudhary Eds.), pp.81–94, Elsevier Science, 2020.
W. Liu, T. Chen, M.-E. Fei, R. Qiu, D. Yu, T. Fu, and J. Qiu, Compos. Part B-Eng., 171, 87 (2019).
V. Mazzanti, R. Pariante, A. Bonanno, O. Ruiz de Ballesteros, F. Mollica, and G. Filippone, Compos. Sci. Technol., 180, 51 (2019).
N. Sumrith, S. M. Rangappa, R. Dangtungee, S. Siengchin, M. Jawaid, and C. I. Pruncu, “Bio-based Polymers and Nanocomposites” (M. L. Sanyang and M. Jawaid Eds.), pp.255–272, Springer International Publishing, Cham, 2019.
H. Ku, H. Wang, N. Pattarachaiyakoop, and M. Trada, Compos. Part B-Eng., 42, 856 (2011).
Y. Tao, L. Yan, and R. Jie, T. Nonferr. Metal. Soc., 19, s651 (2009).
S. H. Kamarudin, L. C. Abdullah, M. M. Aung, and C. T. Ratnam, IOP Conf. Ser. Mater. Sci. Eng., 368, 012011 (2018).
A. Araujo, M. Oliveira, R. Oliveira, G. Botelho, and A. V. Machado, Environ. Sci. Pollut. Res. Int., 21, 9477 (2014).
X. Qi, Y. Ren and X. Wang, Int. Biodeter. Biodegr., 117, 215 (2017).
T. P. Haider, C. Volker, J. Kramm, K. Landfester, and F. R. Wurm, Angew. Chem. Int. Ed. Engl., 131, 50 (2019).
N. D. Yaacob, H. Ismail, and S. Sung Ting, Bioresources, 11 (2015).
R. Siakeng, M. Jawaid, H. Ariffin, and M. S. Salit, J. Bionic Eng., 15, 1035 (2018).
A. Rubio-López, J. Artero-Guerrero, J. Pernas-Sánchez, and C. Santiuste, Polym. Test., 59, 127 (2017).
M. N. Prabhakar, A. U. Rehman Shah, and J. I. Song, Carbohydr. Polym., 168, 201 (2017).
J. P. Mofokeng, A. S. Luyt, T. Tábi, and J. Kovács, J. Thermoplast., 25, 927 (2011).
M. R. Sanjay, P. Madhu, M. Jawaid, P. Senthamaraikannan, S. Senthil, and S. Pradeep, J. Clean. Prod., 172, 566 (2018).
M. S. Islam, M. B. Ahmad, M. Hasan, S. A. Aziz, M. Jawaid, M. K. M. Haafiz, and S. A. H. Zakaria, Bioresources, 10, 1394 (2015).
R. Gunti, A. V. Ratna Prasad, and A. V. S. S. K. S. Gupta, Polym. Compos., 39, 1125 (2016).
L. Duan, W. Yu, and Z. Li, J. Eng. Fiber Fabr., 12, 33 (2017).
R. Siakeng, M. Jawaid, H. Ariffin, and S. M. Sapuan, Polym. Compos., 40, 2000 (2019).
R. D. J. Johnson, V. Arumugaprabu, E. Rajasekar, G. Santhosh, and M. Saravanakumar, Mater. Today-Proc., 5, 6815 (2018).
P. Tripathi and K. Yadav, Int. Res. J. Eng. Technol., 4, 2707 (2017).
M. Brebu, Polymers, 12, 166 (2020).
Acknowledgement
This work was jointly supported by HITEC University Taxila (Pakistan), and Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by Ministry of Science Education Korea (2018R1A6A 1A03024509).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Ejaz, M., Azad, M.M., Shah, A.U.R. et al. Mechanical and Biodegradable Properties of Jute/Flax Reinforced PLA Composites. Fibers Polym 21, 2635–2641 (2020). https://doi.org/10.1007/s12221-020-1370-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-020-1370-y