Abstract
To investigate the substitution of silica fume (SF) with the coupling of glass powder (GP) and steel fiber (STF), a concrete sleeper admixture (CSA) contains SF is considered as the reference concrete admixture. The use of high SF content in CSAs has negative effects on concrete rheology. Furthermore, it decreases the extensive use of ultra-high performance concrete (UHPC) in concrete markets that can mainly be caused by the limitation in available resources and the high cost of SF production. The substitution of SF with GP is insufficient; therefore, the possibility of using the coupling of GP and STF as a SF replacement has been researched. In this regard, 0.5%, 1 % and 1.5% steel fiber by concrete volume and 5%, 10% and 15% glass powder and silica fume by weight of cement content have been investigated. It is found that concrete admixture with the coupling of STF and SF improves all the characteristics of the concrete. Additionally, the coupling effects of GP and STF are better than that of the SF and STF. Based on the synthetic consideration of the performance and cost, the combination of 10% GP and 1.5% STF is optimal in case of CSA mechanical performance.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Afroughsabet V, Geng G, Lin A, Biolzi L, Ostertag CP, Monteiro PJ (2019) The influence of expansive cement on the mechanical, physical, and microstructural properties of hybrid-fiber-reinforced concrete. Cement and Concrete Composites 96:21–32, DOI: https://doi.org/10.1016/j.cemconcomp.2018.11.012
ASTM C185-15 (2015) Standard test method for air content of hydraulic cement mortar. ASTM C185-15, ASTM International, West Conshohocken, PA, USA, DOI: https://doi.org/10.1520/C0185-15
Bayramov F, Tasdemir C, Tasdemir M (2004) Optimisation of steel fibre reinforced concretes by means of statistical response surface method. Cement and Concrete Composites 26:665–675, DOI: https://doi.org/10.1016/S0958-9465(03)00161-6
Bezgin NÖ (2017) High performance concrete requirements for prefabricated high speed railway sleepers. Construction and Building Materials 138:340–351, DOI: https://doi.org/10.1016/j.conbuildmat.2017.02.020
Brandt A, Marks M (1993) Examples of the multicriteria optimization of cement-based composites. Composite Structures 25:51–60, DOI: https://doi.org/10.1016/0263-8223(93)90150-O
BS EN 12350-7:2009 (2009) Testing fresh concrete — Part 7: Air content — Pressure method. BS EN 12350-7: 2009, British Standards Institution, London, UK
Chengdu Hefeng New Material Co., Ltd. (2019) Cementetious materials brochure. Chengdu Hefeng New Material Co., Ltd., Retrieved January 20, 2019, http://www.cdhefeng.com.cn/
Du H, Tan KH (2017) Properties of high volume glass powder concrete. Cement and Concrete Composites 75:22–29, DOI: https://doi.org/10.1016/j.comconcomp.2016.10.010
Esmaeili M, Hosseini SAS, SHaravi M (2016) Experimental assessment of dynamic lateral resistance of railway concrete sleeper. Soil Dynamics and Earthquake Engineering 82:40–54, DOI: https://doi.org/10.1016/j.soildyn.2015.11.011
Foshan Yohe Chemical Technology Co., Ltd. (2019) Glass Powder. Foshan Yohe Chemical Technology Co., Ltd., Retrieved January 20, 2019, http://www.fsyohe.com/
GB/T 50081-2002 (2002) Method for testing mechanical properties of normal concrete. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Beijing, China
Ghafari E, Costa H, Julio E (2014) RSM-based model to predict the performance of self-compacting UHPC reinforced with hybrid steel micro-fibers. Construction and Building Materials 66:375–383, DOI: https://doi.org/10.1016/j.conbuildmat.2014.05.064
Golafshani EM, Behnood A (2019) Estimating the optimal mix design of silica fume concrete using biogeography-based programming. Cement and Concrete Composites 96:95–105, DOI: https://doi.org/10.1016/j.cemconcomp.2018.11.005
Jing G, Fu H, Aela P (2018) Lateral displacement of different types of steel sleepers on ballasted track. Construction and Building Materials 186:1268–1275, DOI: https://doi.org/10.1016/j.conbuilmat.2018.07.095
Juenger MC, Siddique R (2015) Recent advances in understanding the role of supplementary cementitious materials in concrete. Cement and Concrete Research 78:71–80, DOI: https://doi.org/10.1016/j.cemconres.2015.03.018
Kaewunruen S, Meesit R (2016) Sensitivity of crumb rubber particle sizes on electrical resistance of rubberised concrete. Cogent Engineering 3:1126937, DOI: https://doi.org/10.1080/23311916.2015.1126937
Kaikea A, Achoura D, Duplan F, Rizzuti L (2014) Effect of mineral admixtures and steel fiber volume contents on the behavior of high performance fiber reinforced concrete. Materials & Design 63:493–499, DOI: https://doi.org/10.1016/j.matdes.2014.06.066
Khan M, Ali M (2019) Improvement in concrete behavior with fly ash, silica-fume and coconut fibres. Construction and Building Materials 203:174–187, DOI: https://doi.org/10.1016/j.conbuilmat.2019.01.103
Khatri R, Sirivivatnanon V, Gross W (1995) Effect of different supplementary cementitious materials on mechanical properties of high performance concrete. Cement and Concrete Research 25:209220, DOI: https://doi.org/10.1016/0008-8846(94)00128-L
Kou SC, Xing F (2012) The effect of recycled glass powder and reject fly ash on the mechanical properties of fibre-reinforced ultrahigh performance concrete. Advances in Materials Science and Engineering 8(1):12–26, DOI: https://doi.org/10.4236/ojce.2018.81002
Mastali M, Dalvand A, Sattarifard A, Illikainen M (2018) Development of eco-efficient and cost-effective reinforced self-consolidation concretes with hybrid industrial/recycled steel fibers. Construction and Building Materials 166:214–226, DOI: https://doi.org/10.1016/j.conbuildmat.2018.01.147
Omran A, Tagnit-Hamou A (2016) Performance of glass-powder concrete in field applications. Construction and Building Materials 109:84–95, DOI: https://doi.org/10.1016/j.conbuilmat.2016.02.006
Poulton A (2016) The effect of resurfacing on the lateral resistance of narrow gauge low profile concrete sleepers. University of Southern Queensland, Toowoomba, Australia
Ramdani S, Guettala A, Benmalek M, Aguiar JB (2019) Physical and mechanical performance of concrete made with waste rubber aggregate, glass powder and silica sand powder. Journal of Building Engineering 21:302–311, DOI: https://doi.org/10.1016/j.jobe.2018.11.003
Ridha MM, Al-Shafi’i NTH, Hasan MM (2017) Ultra-high performance steel fibers concrete corbels: Experimental investigation. Case Studies in Construction Materials 7:180–190, DOI: https://doi.org/10.1016/j.cscm.2017.07.004
Saidani M, Saraireh D, Gerges M (2016) Behaviour of different types of fibre reinforced concrete without admixture. Engineering Structures 113:328–334, DOI: https://doi.org/10.1016/j.engstruct.2016.01.041
Schmidt M, Fehling E, Geisenhansluke C (2004) Ultra high performance concrete (UHPC). Proceedings of the international symposium on ultra high performance concrete, September 13–15, Kassel, Germany
Shayan A, Xu A (2006) Performance of glass powder as a pozzolanic material in concrete: A field trial on concrete slabs. Cement and Concrete Research 36:457–468, DOI: https://doi.org/10.1016/j.cemconres.2005.12.012
Siad H, Lachemi M, Sahmaran M, Hossain KMA (2017) Mechanical, physical, and self-healing behaviors of engineered cementitious composites with glass powder. Journal of Materials in Civil Engineering 29:04017016, DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001864
Soliman N, Tagnit-Hamou A (2017a) Partial substitution of silica fume with fine glass powder in UHPC: Filling the micro gap. Construction and Building Materials 139:374–383, DOI: https://doi.org/10.1016/j.conbuildmat.2016.08.073
Soliman NA, Tagnit-Hamou A (2017b) Using glass sand as an alternative for quartz sand in UHPC. Construction and Building Materials 145:243–252, DOI: https://doi.org/10.1016/j.conbuilmat.2017.03.187
Vaitkevicius V, Šerelis E, Hilbig H (2014) The effect of glass powder on the microstructure of ultra high performance concrete. Construction and Building Materials 68:102–109, DOI: https://doi.org/10.1016/j.conbuildmat.2014.05.101
Vijayakumar G, Vishaliny H, Govindarajulu D (2013) Studies on glass powder as partial replacement of cement in concrete production. International Journal of Emerging Technology and Advanced Engineering 3:153–157
Wiegrink K, Marikunte S, Shah SP (1996) Shrinkage cracking of high-strength concrete. Materials Journal 93:409–415, DOI: https://doi.org/10.15623/ijret.2016.0502053
Wu Z, Shi C, He W, Wu L (2016) Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete. Construction and Building Materials 103:8–14, DOI: https://doi.org/10.1016/j.conbuildmat.2015.11.028
Zhu N, Jin F, Kong X, Xu Y, Zhou J, Wang B, Wu H (2018) Interface and anti-corrosion properties of sea-sand concrete with fumed silica. Construction and Building Materials 188:1085–1091, DOI: DOI: https://doi.org/10.1016/j.conbuildmat.2018.08.040
Acknowledgements
Project is supported by College Student Research and Career-creation Program of Beijing City, and Natural Science Foundation of China (Grant No. 51578051).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, B., Li, H., Siahkouhi, M. et al. Study on Coupling of Glass Powder and Steel Fiber as Silica Fume Replacement in Ultra-High Performance Concrete: Concrete Sleeper Admixture Case Study. KSCE J Civ Eng 24, 1545–1556 (2020). https://doi.org/10.1007/s12205-020-0832-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-020-0832-5