Abstract
Water is perhaps the most widely adopted working fluid in conventional industrial heat transport engineering. However, it may no longer be the best option today due to the increasing scarcity of water resources. Furthermore, the wide variations in water supply throughout the year and across different geographic regions also makes it harder to easily access. To address this issue, finding new alternatives to replace water-based technologies is imperative. In this paper, the concept of a water-free heat exchanger is proposed and comprehensively analyzed for the first time. The liquid metal with a low melting point is identified as an ideal fluid that can flexibly be used within a wide range of working temperatures. Some liquid metals and their alloys, which have previously received little attention in thermal management areas, are evaluated. With superior thermal conductivity, electromagnetic field drivability, and extremely low power consumption, liquid metal coolants promise many opportunities for revolutionizing modern heat transport processes: serving as heat transport fluid in industries, administrating thermal management in power and energy systems, and innovating enhanced cooling in electronic or optical devices. Furthermore, comparative analyses are conducted to understand the technical barriers encountered by advanced water-based heat transfer strategies and clarify this new frontier in heat-transport study. In addition, the unique merits of liquid metals that could lead to innovative heat exchanger technologies are evaluated comprehensively. A few promising industrial situations, such as heat recovery, chip cooling, thermoelectricity generation, and military applications, where liquid metals could play irreplaceable roles, were outlined. The technical challenges and scientific issues thus raised are summarized. With their evident ability to meet various critical requirements in modern advanced energy and power industries, liquid metal-enabled technologies are expected to usher a new and global era of water-free heat exchangers.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Blanco J, Malato S, Fernández-Ibañez P, Alarcón D, Gernjak W, Maldonado M I. Review of feasible solar energy applications to water processes. Renewable and Sustainable Energy Reviews, 2009, 13(6, 7): 1437–1445
United Nations Development Program (UNDP). Beyond scarcity: Power, poverty and the global water crisis. Human Development Report, 2006
Yüksel I. Hydro power for sustainable water and energy development. Renewable & Sustainable Energy Reviews, 2010, 14(1): 462–469
Wikipedia. Desert. 2010-10-29, http://en.wikipedia.org/wiki/Desert#Desert_features
Annan K. The Peoples. Millennium Report of the Secretary-General, United Nations. 2000
Hunter P R, Waite M, Ronchi E. Drinking Water and Infectious Disease. London: CRC Press, 2003
US Department of the Interior. Water Use in the United States. 2010-03-25, http://www.nationalatlas.gov/articles/water/a_wateruse.html
Schroeder B. Industrial water use. 2004, http://academic.evergreen.edu/g/grossmaz/SCHROEBJ/
Pidwirny M. Physical properties of water. In: Fundamentals of Physical Geography, 2nd Edition. 2006, http://www.physicalgeography.net/fundamentals/8a.html
Hartnett A. Liquid metal thermal interface materials 1. 2008-10-14, http://blogs.indium.com/blog/package-on-package/page/5
Liu J, Zhou Y X. A computer chip cooling method which uses low melting point metal and its alloys as the cooling fluid. China Patent No.02131419.5. 2002
Tenchine D. Some thermal hydraulic challenges in sodium cooled fast reactors. Nuclear Engineering and Design, 2010, 240(5): 1195–1217
Zrodnikov A V, Efanov A D, Orlov Yu I, Martynov P N, Troyanov VM, Rusanov A E. Heavy liquid metal coolant: Lead-bismuth and lead-technology. Atomic Energy, 2004, 97(2): 534–537
Baxi C B, Wong C P C. Review of helium cooling for fusion reactor applications. Fusion Engineering and Design, 2000, 51–52: 319–324
Liu J. Development of new generation miniaturized chip-cooling device using metal with low melting point or its alloy as the cooling fluid. In: Proceedings of the International Conference on Micro Energy Systems, Sanya, China, 2005, 89–97
Ma K Q, Liu J. Liquid metal cooling in thermal management of computer chips. Frontiers of Energy and Power Engineering in China, 2007, 1(4): 384–402
Shah R K, Thonon B, Benforado D M. Opportunities for heat exchanger applications in environmental systems. Applied Thermal Engineering, 2000, 20(7): 631–650
Shah R K, Mueller A C. Heat exchange. In: Ullmann’s Encyclopedia of Industrial Chemistry, Unit Operations II, vol. B3, Verlag Chemie, Weinheim, Germany, 1988, 108
Patel V K, Rao R V. Design optimization of shell-and-tube heat exchanger using particle swarm optimization technique. Applied Thermal Engineering, 2010, 30(7): 1417–1425
Vera-García F, García-Cascales J R, Gonzálvez-Maciá J, Cabello R, Llopis R, Sanchez D, Torrella E. A simplified model for shelland-tubes heat exchangers: Practical application. Applied Thermal Engineering, 2010, 30(10): 1231–1241
Roetzel W, Xuan Y M. Dynamic Behavior of Heat Exchangers. Sweden: Computational Mechanics Publications, 1999, 13
Southwest Thermal Technology I N C. Shell and Tube Heat Exchangers. 2010, http://www.southwestthermal.com/shell-tubeexchanger.html
Spirax-Sarco Limited. Steam consumption of heat exchangers. 2010, http://www.spiraxsarco.com/resources/steam-engineeringtutorials/steam-engineering-principles-and-heat-transfer/steam-consumption-of-heat-exchangers.asp
Zaleski T, Klepacka K. Plate heat exchangers-method of calculation, charts and guidelines for selecting plate heat exchanger configurations. Chemical Engineering and Processing, 1992, 31(1): 49–56
Rohsenow W M, Hartnett J P, Cho Y I. Handbook of Heat Transfer. Third Edition. New York: McGraw-Hill, 1998
Bennet C O, Meyers J O. Momentum, Heat and Mass Transfer, Third Edition. London: McGraw-Hill, 1982
Bergles A E. Techniques to augment heat transfer. In: Rosenhow W M, Hartnett J P, Ganic E N, eds. Handbook of Heat Transfer Applications. New York: McGraw-Hill, 1985
Bergles A E. The imperative to enhance heat transfer. In: Kakaç S, Bergles A E, Mayinger F, Yüncü H, eds. Heat Transfer Enhancement of Heat Exchanger. Dordrecht, The Netherlands: Kluwer Academic Publishers, 1998
Srihari N, Das S K. Transient response of multi-pass plate heat exchangers considering the effect of flow maldistribution. Chemical Engineering and Processing, 2008, 47(4): 695–707
Durmuş A, Benli H, Kurtbaş I, Gül H. Investigation of heat transfer and pressure drop in plate heat exchangers having different surface profiles. International Journal of Heat and Mass Transfer, 2009, 52(5, 6): 1451–1457
Gut J A W, Pinto J M. Modeling of plate heat exchangers with generalized configurations. International Journal of Heat and Mass Transfer, 2003, 46(14): 2571–2585
Srihari N, Rao B P, Suden B, Das S K. Transient response of plate heat exchangers considering effect of flow maldistribution. International Journal of Heat and Mass Transfer, 2005, 48(15): 3231–3243
Gut J A W, Fernandes R, Pinto J M, Tadini C C. Thermal model validation of plate heat exchangers with generalized configurations. Chemical Engineering Science, 2004, 59(21): 4591–4600
Gut J A W, Pinto J M. Optimal configuration design for plate heat exchangers. International Journal of Heat and Mass Transfer, 2004, 47(22): 4833–4848
Georgiadis M C, Macchietto S. Dynamic modeling and simulation of plate heat exchangers under milk fouling. Chemical Engineering Science, 2000, 55(9): 1605–1619
Pearce N. Plate exchanger defeats industry conservatism. Europe Power News, 2001, (10): 16–17
Anxionnaz Z, Cabassud M, Gourdon C, Tochon P. Heat exchanger/reactors (HEX reactors): Concepts, technologies: State-of-the-art. Chemical Engineering and Processing, 2008, 47(12): 2029–2050
Sheu T W H, Tsai S F. A comparison study on fin surfaces in finned-tube heat exchangers. International Journal of Numerical Methods for Heat & Fluid Flow, 1999, 9(10): 92–106
Watel B. Review of saturated flow boiling in small passages of compact heat-exchangers. International Journal of Thermal Sciences, 2003, 42(2): 107–140
Ismail L S, Velraj R, Ranganayakulu C. Studies on pumping power in terms of pressure drop and heat transfer characteristics of compact plate-fin heat exchangers—A review. Renewable & Sustainable Energy Reviews, 2010, 14(1): 478–485
Zaheed L, Jachuck R J J. Review of polymer compact heat exchangers, with special emphasis on a polymer film unit. Applied Thermal Engineering, 2004, 24(16): 2323–2358
Yau Y H, Ahmadzadehtalatapeh M. A review on the application of horizontal heat pipe heat exchangers in air conditioning systems in the tropics. Applied Thermal Engineering, 2010, 30(2, 3): 77–84
Noie-Baghban S H, Majideian G R. Waste heat recovery using heat pipe heat exchanger (HPHE) for surgery rooms in hospitals. Applied Thermal Engineering, 2000, 20(14): 1271–1282
Yang F, Yuan X G, Lin G P. Waste heat recovery using heat pipe heat exchanger for heating automobile using exhaust gas. Applied Thermal Engineering, 2003, 23(3): 367–372
Faghri A. Heat Pipe Science and Technology. Washington, DC: Taylor & Francis, 1995
Dunn P D, Reay D A. Heat Pipes, Third Edition. New York: Pergamon Press, 1982
Terpstra M, Veen J G V. Heat Pipes Construction and Application. New York: Elsevier Applied Science, 1987
Brown R F, Gustafson E, Gisondo F, Hutchison M. Performance evaluation of the grumman prototype space erectable radiator system. In: Proceeding of 5th Joint Thermophysics and Heat Transfer Conference, Seattle: AIAA and ASME, 1990
Brown R, Kosson R, Ungar E. Design of the SHARE II Monogroove heat pipe. In: Proceeding of 26th Thermophysics Conference, Honolulu: AIAA, 1991
Garner S D P E. Heat pipes for electronics cooling applications. 1996-09-01, http://www.electronics-cooling.com/1996/09/heatpipes-for-electronics-cooling-applications/
Faghri A, Reynolds D B, Faghri P. Heat pipes for hands. Mechanical Engineering (New York), 1989, 11(6): 72–75
Faghri A. Temperature regulation system for the human body using heat pipes. US Patent No. 5269369. 1993
Firouzfar E, Attaran M. A review of heat pipe heat exchangers activity in Asia. In: Proceeding of World Academy of Science. Engineering and Technology, 2008, 47: 22–27
Sun J Y, Shyu R J. Waste heat recovery using heat pipe heat exchanger for industrial practices. In: Proceeding of 5th International Heat Pipe Symposium, Melbourne, Australia, 1996
Dube V, Sauciuc I, Akbarzadeh A. Design construction and testing of a thermosyphon heat exchanger for medium temperature heat recovery. In: Proceeding of 5th International Heat Pipe Symposium, Melbourne, Australia, 1996
Wu X P, Johnson P, Akbarzadeh A. A study of heat pipe heat exchanger effectiveness in an air conditioning application. In: Proceeding of 5th International Heat Pipe Symposium, Melbourne, Australia, 1996
Peterson G P. An Introduction to Heat Pipes: Modeling, Testing, and Applications. New York: Wiley-Interscience, 1994
Vasiliev L L, Kiselev V G, Matveev Yu N, Molodkin F F. Heat Pipe Heat Exchangers. Minsk: Nauka I Technica, 1987 (in Russian)
Shah R K, Giovannelli A D. Heat Pipe Heat Exchanger Design Theory Heat Transfer Equipment Design. Washington, DC: Hemisphere, 1988, 609–653
Bezrodny M, Goscik J, Kondrusik E. Hydrodynamic and heat transfer “crises” phenomena in horizontal and inclined thermosyphons with the counter current flow of liquid and vapour. In: Proceedings of the International Conference on Heat Transfer with Change of Phase, Kielce, Poland, Part 1, 1996, 61–72
T’Joen C, Park Y, Wang Q, Sommers A, Han X, Jacobi A. A review on polymer heat exchangers for HVAC&R applications. International Journal of Refrigeration, 2009, 32(5): 763–779
Milieupartners. Gas and liquid heat exchangers. 2003-11-19, http://www.milieupartners.nl/glheatex.htm
Greenbox. Plastic air-to-air plate heat exchangers. 2003-11-19, http://www.greenbox.uk.com
Kordelin T. Heat exchanger element. US Patent No.5671804. 1997
Reay D A. Learning from experiences with compact heat exchangers. In: Caddet Analyses Series No. 25. Sittard, Netherlands: Centre for the Analysis and Dissemination of Demonstrated Energy Technologies, 1999
Rousse D R, Martin D Y, Thériault R, Léveillée F, Boily R. Heat recovery in greenhouses: a practical solution. Applied Thermal Engineering, 2000, 20(8): 680–706
Cesaroni A J. Multi-panelled heat exchanger. US Patent No.5499676, 1996
Metwally M N, Abou-Ziyan H Z, El-Leathy A M. Performance of advanced corrugated duct solar air collector compared with five conventional designs. Renewable Energy, 1997, 10(4): 519–537
Patel A B, Brisson J G. Experimental performance of a single stage superfluid Stirling refrigerator using a small plastic recuperator. Journal of Low Temperature Physics, 1998, 111(1, 2): 210–212
Moore D A. Molded heat exchanger structure for portable computer. US Patent No. 6026888, 2000
Dewan A, Mahanta P, Raju K S, Kumar P S. Review of passive heat transfer augmentation techniques. Proceedings of the Institution of Mechanical Engineers. Part A, Journal of Power and Energy, 2004, 218(7): 509–527
Ohadi M M, Buckley S G. High temperature heat exchangers and microscale combustion systems: Applications to thermal system miniaturization. Experimental Thermal and Fluid Science, 2001, 25(5): 207–217
Bergles A E, Webb R L. A guide to the literature on convective heat transfer augmentation. In: Advances in Enhanced Heat Transfer. New York: ASME Symposium, HID, 1985
Wikipedia. Properties of water. 2010-10-12, http://en.wikipedia.org/wiki/Properties_of_water
Brown T E, LeMay H E, Bursten B E. Chemistry: The Central Science. 10th ed. Upper Saddle River, NJ: Pearson Education, Inc., 2006
Lide D R. CRC Handbook of Chemistry and Physics. 70th ed. Boca Raton, FL: CRC Press, 1990
Seavey M M. Water Properties. 2002-02-13. http://www.uni.edu/~iowawet/H2OProperties.html
Wikipedia. Water. 2010-10-09, http://en.wikipedia.org/wiki/Water#Effects_on_human_ciVilization
Kumar C P. Fresh water resources: A perspective. 2003, http://www.angelfire.com/bc/nihhrrc/documents/fresh.html
World Water Assessment Programme. Water for People, Water for Life. The United Nations World Water Development Report, 2003
Chu K Y. Sodium loses its luster: A liquid metal that’s not really metallic. 2007-09-26, http://www.physorg.com/news110042534.html
Paradis P F, Ishikawa T, Fujii R, Yoda S. Physical properties of liquid and undercooled tungsten by levitation techniques. Applied Physics Letters, 2005, 86(4): 041901–041903
Smither R K. Liquid metal cooling of synchrotron optics. In: Society of Photo-Optical Instrumentation Engineers (SPIE) International Symposium on Optical Applied Science and Engineering, San Diego, CA (United States): SPIE High Heat Flux Engineering, 1992, 116–134
Iida T, Guthrie R I L. The Physical Properties of Liquid Metals. Oxford: Clarendon Press, 1993
Shimoji M. Liquid Metals: An introduction to the physics and chemistry of metals in the liquid state. New York: Academic Press, 1977
Yang W S. Blanket design studies for maximizing the discharge burn up of liquid metal cooled ATW systems. Annals of Nuclear Energy, 2002, 29(5): 509–523
Smither R K, Forster G A, Kot C A, Kuzay T M. Liquid gallium metal cooling for optical elements with high heat loads. Nuclear Instruments & Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 1988, 266(1–3): 517–524
Blackburn B W, Yanch J C. Liquid gallium cooling for a high power beryllium target for use in accelerator boron neutron capture therapy (ABNCT). In: Proceedings of Eighth Workshop on Targetry and Target Chemistry, St. Louis, Missouri, USA, 1999, 7–9
Blackburn B W. High-power target development for accelerator based neutron capture theory. Dissertation for the Doctoral Degree, Boston, MA: MIT, 2002
Tak N I I, Song T Y, Kim C H. Thermal hydraulic investigations on lead-bismuth cooled fuel assemblies with ducts. Progress in Nuclear Energy, 2004, 44(1): 67–74
Farabolini W, Ciampichetti A, Dabbene F, Fütterer M A, Giancarli L, Laffont G, Puma A L, Raboin S, Poitevin Y, Ricapito I, Sardain P. Tritium control modeling for a helium cooled lithium-lead blanket of a fusion power reactor. Fusion Engineering and Design, 2006, 81(1–7): 753–762
Surmann P, Zeyat H. Voltammetric analysis using a self-renewable non-mercury electrode. Analytical and Bioanalytical Chemistry, 2005, 383(6): 1009–1013
Cadwallader L C. Gallium safety in the laboratory. In: Energy Facility Contractors Group (EFCOG) Safety Analysis Working Group (SAWG) 2003 Annual Meeting, Salt Lake City, UT (US): USDOE Office of Science (SC) (US), 2003
Miner A, Ghoshal U. Cooling of high-power-density microdevices using liquid metal coolants. Applied Physics Letters, 2004, 85(3): 506–508
Li T, Lv Y G, Liu J, Zhou Y X. Computer chip cooling method using low melting point liquid metal or its alloy as the cooling fluid. In: Annual Heat and Mass Transfer Conference of the Chinese Society of Engineering Thermophysics. Jilin, China: Association of Engineering Thermophysics, 2004, 1115–1118 (in Chinese)
Wikipedia. Surface tension. 2010-10-13, http://en.wikipedia.org/wiki/Surface_tension
Prokhorenko S V. Structure and viscosity of gallium, indium, and tin in the vincinity of the crystallization temperature. Materials Science, 2005, 41(2): 271–274
Bohdansky J. Temperature dependence of surface tension for liquid metals. Journal of Chemical Physics, 1968, 49: 2982–2986
Ma K Q, Liu J. Heat driven liquid metal cooling device for the thermal management of computer chip. Journal of Physics D: Applied Physics, 2007, 40(5): 4722–4729
Admin. Apple iPhone Touch Screen Mobile Phone / iPod / PDA Announced. 2007-01-10, http://news.ecoustics.com/bbs/messages/10381/312015.html
Tripathi A. Supercomputer the most powerful computer in the world. 2009-07-18, http://mylovetechnology.com/others/supercomputer-is-a-most-powerful-computer/
Jack. Consolidation of China’s Steel Industry? Don’t Bet On It! http://managingthedragon.com/?p=490
Justin. La Mancha experiments with solar concentrators. 2007-05-27, http://www.metaefficient.com/renewable-power/la-manchaexperiments-with-solar-concentrators.html
Pautsch G. How is high heat flux cooling technology being driven by supercomputers. In: Proceedings of the 9th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, Las Vegas, NV, USA: IEEE, 2004, 702–703
Riyonuk. Liquid cooling. 2009-04-22, http://www.cheapassgamer.com/forums/showthread.php?t=222274
Liu J, Zhou Y X, Lv Y G, Li T. Liquid-metal-based miniaturized chip-cooling device driven by electromagnetic pump. In: ASME 2005 International Mechanical Engineering Congress and Exposition, Orlando, Florida, USA: ASME, 2005, 501–510
Mohseni K. Effective cooling of integrated circuits using liquid alloy electrowetting. In: Proceedings of the 21th IEEE Semiconductor Thermal Measurement and Management Symposium, San Jose, USA: IEEE, 2005, 20–25
Reay D A. Industrial Energy Conservation, a Handbook for Engineers and Managers. 2nd ed. Exeter, England: Pergamon Press, 1979
Wuxi Land Mechanical & Power Engineering. Co Ltd. Waste heat recovery boiler. http://wxland.en.alibaba.com/product/51614742-50352676/Waste_Heat_Recovery_Boiler.html
Pandiyarajan V, Pandian M C, Malan E, Velraj R, Seeniraj R V. Experimental investigation on heat recovery from diesel engine exhaust using finned shell and tube heat exchanger and thermal storage system. Applied Energy, 2011, 88(1): 77–87
United Nations Environment Programme. Energy Efficiency Guide for Industry in Asia. 2006, http://www.energyefficiencyasia.org/
Verma P, Varun, Singal S K. Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material. Renewable & Sustainable Energy Reviews, 2008, 12(4): 999–1031
US Energy System, University of Michigan. Center for Sustainable Systems. “US Energy System Factsheet” Pub No CSS03-11. 2009
Chughtai O, Shannon D. Fossil fuels. 2008, http://www.umich.edu/~gs265/society/fossilfuels.htm
US Department of Energy. World’s Largest Utility Battery System Installed in Alaska, US 2003-09-24, http://apps1.eere.energy.gov/news/news_detail.cfm/news_id=6490
Wikipedia. Electricity generation. 2010-10-18. http://en.wikipedia. org/wiki/Power_generation
Deng Y G, Liu J, Zhou Y X. Study on liquid metal cooling of photovoltaic cell. In: Proceedings of the Inaugural US-EU-China Thermophysics Conference, Beijing, China: ASME, 2010, 1–7
Cao E. Heat Transfer in Process Engineering. New York: McGraw-Hill Professional, 2009
Deng Y G, Liu J. Corrosion development between liquid gallium and four typical metal substrates used in chip cooling device. Applied Physics A: Materials Science & Processing, 2009, 95(3): 907–915
Sarno C, Tantolin C. Integration, cooling and packaging issues for aerospace equipments. Automation & Test in Europe Conference & Exhibition (DATE), Design, Dresden, 2010, 1225–1230
Wilson J R. The great cooling dilemma: conduction, convection, or liquid. 2006-05-01, http://www.militaryaerospace.com/index/display/ article-display/255367/articles/military-aerospace-electronics/ volume-17/issue-5/features/technology-focus/the-great-cooling-dilemma-conduction-convection-or-liquid.html
Admin. Airborne laser weapon near completion. 2010-08-01, http://realitypod.com/2010/08/airborne-laser-weapon-near-completion/
Dillow C. DARPA wants to install transcranial ultrasonic mind control devices in soldiers’ helmets. 2010-09-09, http://www.thewe.cc/contents/more/archive/sound_as_weapon.html
Melton R B Jr, Lestz S J, Quillian R D Jr, Rambie E J. Direct water injection cooling for military engines and effects on the diesel cycle. Symposium (International) on Combustion, 1975, 15(1): 1389–1399
Armonk N Y. “Liquid metal” at the center of IBM innovation to significantly reduce cost of concentrator photovoltaic cells. 2008-05-15, http://www.nanotech-now.com/news.cgi?story_id = 29341
Ma K Q, Liu J. Nano liquid-metal fluid as ultimate coolant. Physics Letters. [Part A], 2007, 361(3): 252–256
So J H, Thelen J, Qusba A, Hayes G J, Lazzi G, Dickey M D. Reversibly deformable and mechanically tunable fluidic antennas. Advanced Functional Materials, 2009, 19(22): 3632–3637
Park U, Yoo K, Kim J. Development of a MEMS digital accelerometer (MDA) using a microscale liquid metal droplet in a microstructured photosensitive glass channel. Sensors and Actuators A: Physical, 2010, 159(1): 51–57
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, H., Liu, J. Revolutionizing heat transport enhancement with liquid metals: Proposal of a new industry of water-free heat exchangers. Front. Energy 5, 20–42 (2011). https://doi.org/10.1007/s11708-011-0139-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11708-011-0139-9