Avoid common mistakes on your manuscript.
Correction to: J Therm Spray Tech https://doi.org/10.1007/s11666-019-00854-4
Three authors were not listed on the original article: Riga-Nirina Raoelison, Philippe Herve, and Jiang Wang. Please note the correct author and affiliations of the article should read:
Yingchun Xie1,2, Chaoyue Chen1,3*, Rija-Nirina Raoelison1, Philippe Herve4, Marie-Pierre Planche1, Sihao Deng1, Renzhong Huang2*, Jiang Wang3, Zhongming Ren3, Hanlin Liao1
1LERMPS, ICB UMR 6303, CNRS, Univ. Bourgogne Franche-Comté, UTBM, F-90010 Belfort, France
2National Engineering Laboratory for Modern Materials Surface Engineering Technology; The Key Lab of Guangdong for Modern Surface Engineering Technology; Guangdong Institute of New Materials, Guangzhou 510651, People’s Republic of China
3State Key Laboratory of Advanced Special Steels, School of Materials Science and Engineering, Shanghai University, Shanghai 200444, People’s Republic of China
4LEME. Université Paris Ouest Nanterre la Défense, 92410 Ville d’Avray, France
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Xie, Y., Chen, C., Raoelison, RN. et al. Correction to: Strengthened Peening Effect on Metallurgical Bonding Formation in Cold Spray Additive Manufacturing. J Therm Spray Tech 28, 881 (2019). https://doi.org/10.1007/s11666-019-00863-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11666-019-00863-3