Avoid common mistakes on your manuscript.
Correction to: JMEPEG (2023) 32:6486–6495 https://doi.org/10.1007/s11665-022-07549-y
The authors’ affiliations were listed incorrectly in the published article. The correct list of author affiliations is shown as follows:
Vikas B. Magdum, KLS Gogte Institute of Technology, Visvesvaraya Technological University, Belagavi, 590018, India; and Department of Mechanical Engineering, DKTE Society’s Textile and Engineering Institute, Ichalkaranji, Maharashtra, 416115, India; Jayant K. Kittur, Sachin C. Kulkarni, KLS Gogte Institute of Technology, Visvesvaraya Technological University, Belagavi, 590018, India.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Magdum, V.B., Kittur, J.K. & Kulkarni, S.C. Correction to: Parametric Evaluation and Optimization of Laser Machining of SS304 Using Response Surface Methodology. J. of Materi Eng and Perform 33, 539 (2024). https://doi.org/10.1007/s11665-023-08792-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-023-08792-7