Abstract
Reconstruction of the ankle after trauma requires a variety of treatment strategies. Once the personality of the problem is appreciated, a tailored approach may be implemented. The Ilizarov method provides a versatile, powerful, and safe approach. It is particularly useful in the setting of infection, bone loss, poor soft tissue envelope, leg length discrepancy, bony deformity, and joint contracture. In this article, a variety of posttraumatic ankle pathologies are discussed. Treatment methods including osteotomy, arthrodesis, distraction, correction of contracture, nonunion repair, and tibia and fibula lengthening are reviewed. The use of the Ilizarov method for acute and/or gradual correction as well as the application of simultaneous treatments at multiple levels is discussed in this article.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
The ankle is particularly vulnerable to trauma. The bones of the ankle are subcutaneous. The soft tissue envelope consists of only skin, tendon, and neurovascular structures anterior, lateral, and medial to the joint. Only in the posterior quadrant is there a modest muscular envelope. In addition, the ankle joint does not tolerate deformity or articular incongruity after trauma. Studies have shown that this leads to pain and progressive ankle arthrosis [1–3].
The soft tissue envelope is a crucial factor in dealing with acute and posttraumatic injury of the ankle. Often the acute injuries are open fractures, which require plastic surgery intervention including skin grafts, and free flaps. Compromise to the soft tissue is a major factor in determining the outcome of high-energy ankle injuries particularly with regard to infection [2, 4].
Tibial nonunions and failed pilon fractures have been treated with a variety of surgical methods including plate osteosynthesis with bone graft [4, 5], intramedullary (IM) nailing [6], and external fixation [7–17]. The complexity of a posttraumatic ankle (PTA) can be quite variable and depends on several factors. The “personality of a fracture” was a term and concept introduced by Shatzker and Tile [18] and its use underscores the complexity of a particular problem and helps organize a treatment approach. It is helpful to apply this personality concept to the PTA. The personality of a PTA is determined by several factors, including joint arthrosis, bone loss, radiographic appearance, and stiffness, as they relate to the nonunion biology, deformity, leg length discrepancy, presence or history of infection, soft tissue envelope, retained hardware, and patient factors including diabetes, smoking, and neuropathy.
The Ilizarov method has gained many advocates for the treatment of tibial nonunions and failed pilon fractures over the last two decades, particularly hypertrophic nonunions [11, 12, 14–16, 19, 20] and nonunions associated with bone loss [13, 21–23], infection [24–27], poor soft tissue envelope [11, 16] and ankle fusion [28–31]. The classic Ilizarov frame (Smith & Nephew, Memphis, TN, USA) has been used to correct all deformity, including lengthening and bone transport [22, 32–36] and fusion [28–31]. However, deformity correction of translation and rotation can be complex and cumbersome with such a frame and require lengthy frame modifications.
The Taylor spatial frame (TSF; Smith & Nephew) isan evolution of the original Ilizarov frame and uses the same concepts of distraction osteogenesis as the classic frame. However, it can be used with the help of a computer program to simultaneously correct length and all aspects of deformity including angulation, translation, and rotation. This is accomplished by establishing a “virtual hinge” in space around which all deformity is corrected. Circular rings are connected with 6 struts, which are gradually adjusted by the patient to correct the entire deformity [9, 16].
We have used this modern Ilizarov method to comprehensively approach these complex,and in many cases, limb salvage situations. The acute injuries leading to the need for reconstruction range from low energy ankle fractures tohigh-energy pilon fractures. A PTA problem can be complex and include numerous factors. These factors will define the personality of the ankle and this will help us establish a tailored and rational treatment approach.
The goals of treatment are a plantigrade foot, optimal leg lengths, bony union, ankle stability, and a mobile painless ankle joint. In many circumstances, the ankle joint is destroyed and an arthrodesis becomes the best option for dealing with pain and/or instability.
Clinical evaluation
In the history, one should obtain information about type of bony and soft tissue injury, surgical procedures performed, history of infection, and the use of antibiotics. High-energy injuries and open fractures have a higher risk for infection. Information about back pain, perceived leg length discrepancy (LLD), use of a shoe lift, and deformity should be elicited from the patient. The presence of deformity will often lead to the patient’s report of a feeling of increased pressure on the medial or lateral part of the foot with a valgus or varus deformity, respectively. A short leg will often lead to complaints of low back pain and contralateral hip pain. If antibiotics are being used to suppress an infected nonunion, an attempt should be made to discontinue these for 6 weeks before surgery to obtain reliable intraoperative culture samples. Discontinuation of antibiotics must be done with caution and careful observation, particularly in compromised patients such as those who have diabetes or are on immunosuppressive medications. The current amount of pain, the use of narcotics, and theability to ambulate with or without support should be noted.
On physical examination, one should look for deformity and LLD with the patient standing still and walking. The inability to bear weight suggests an unstable nonunion. The view from the back is helpful for seeing coronal plane deformity. LLD is evaluated by using blocks under the short leg and by examining the level of the iliac crests. The view from the side is helpful for observing sagittal plane deformity and equinus contracture. The combination of recurvatum deformity above the ankle and equinus contracture of the ankle will lead to a foot translated forward position with an extension moment on the knee (Fig. 1). Range of motion of the ankle, subtalar, forefoot, and toes should be recorded. Rigid compensation for ankle deformity through the subtalar joint is an important factor. This typically occurs when there is long-standing ankle deformity. If this is present, it must be taken into account when correcting the ankle. The condition of the soft tissue envelope, especially previous surgical wounds and flaps, and neurovascular findings should be recorded. This includes the posterior tibial and dorsalis pedis pulses, foot sensation, and dorsiflexion and plantarflexion motor function of the ankle and toes.
Radiographs should include anteroposterior (AP), lateral, and mortise views of the ankle, Saltzman’s view of both feet [37], and a 51-in. bipedal erect leg x-ray including the hips to ankles with blocks under the short legto level the pelvis [38]. LLD as well as a limb alignment can be measured from a standing bipedal 51-in. radiograph. The short leg is placed on blocks to level the pelvis and the height of the blocks is recorded. This can be done with the patient using crutches if necessary. These radiographs yield crucial information about LLD, deformity, presence of hardware, arthritis, and bony union. A supine scanogram can also be used to measure length discrepancy but this is not useful for alignment analysis. Computed tomography (CT) scan and magnetic resonance imaging (MRI) can be used for further evaluation as needed. The CT scan can be helpful in getting more information about bony union. The MRI can be helpful for obtaining information about the condition of cartilage in the ankle and subtalar joints and the presence of infection. Nuclear medicine studies can also be used, but we have not found them to be very helpful in this evaluation.
Rotational deformity is best assessed on clinical exam with the patient in the prone position. Thigh-foot axis (TFA) is used to assess rotational deformity of the tibia. Rotational profile of the femur is used to assess rotational deformity in the femur. CT scan can also be used for this purpose. CT scan cuts at the proximal femur, distal femur, proximal tibia, and distal tibia allow analysis of rotational deformity [38].
Laboratory studies including white blood cell count, erythrocyte sedimentation rate, and C-reactive protein level can be helpful for diagnosing the presence of infection. Selective lidocaine injections into the ankle and subtalar joints may be helpful for diagnosing the dominant source of pain.
Classification
The following is a list of PTA personalities that can be addressed with a modular Ilizarov method treatment approach.
-
1.
Ankle arthritis
-
(a)
With no deformity
-
(b)
With deformity
-
(c)
With subtalar arthritis
-
(a)
-
2.
Supramalleolar deformity
-
(a)
Without ankle arthritis
-
(b)
With ankle arthritis
-
(a)
-
3.
Ankle contracture
-
(a)
Without supramalleolar deformity
-
(b)
With supramalleolar deformity
-
(c)
With arthritis
-
(a)
-
4.
Supramalleolar nonunion
-
(a)
Hypertrophic (stiff)
-
(b)
Normotrophic (partially mobile)
-
(c)
Atrophic (mobile)
-
(d)
Infected
-
(e)
With ankle arthritis
-
(a)
-
5.
Mismatched columns of the ankle
-
(a)
Tibia short
-
(b)
Fibula short
-
(a)
-
6.
Associated tibial shaft problem
-
(a)
Deformity
-
(b)
LLD
-
(a)
-
7.
Bone loss
-
(a)
From tibial plafond
-
(a)
-
(b)
From talus
Treatment principles
Features of the Ilizarov method
The Ilizarov method is particularly useful for addressing this spectrum of posttraumatic ankle pathology. Listed below are versatile features of the Ilizarov method [10, 11].
-
1.
Avoids internal fixation in presence or history of infection.
-
2.
Allows a minimal incision technique in setting of poor soft tissue.
-
3.
Utilizes acute and/or gradual correction of deformity.
-
4.
Utilizes opening wedge correction avoiding need for bone resection.
-
5.
Useful for large deformity correction.
-
6.
Postoperative adjustability for compression or correction.
-
7.
Simultaneous lengthening is possible for optimization of LLD.
-
8.
Allows multiple-level treatment (a modular approach) (Fig. 2).
-
9.
Weight bearing and ankle range of motion are encouraged.
These features will be discussed in relation to the spectrum of the posttraumatic ankle personality.
Acute or gradual correction
One can use either acute or gradual correction of a nonunion or malunion. Acute corrections can be performed in conjunction with all methods of fixation including plates, IM nails, and external fixation frames. Gradual correction requires the use of specialized frames. The personality of the problems helps guide the surgeon toward the best method. For example, a tibial malunion with 15° valgus deformity and 4-cm shortening is best handled with an osteotomy to gradually correct the angular deformity and lengthen the bone with a specialized frame. The Ilizarov method is used to gradually correct the complete deformity with distraction osteogenesis. One may choose to perform the deformity correction and lengthening at one level if bone regeneration potential is good. Alternatively, one may choose to perform a double-level osteotomy—one level at the center of rotation and angulation (CORA) [38, 39] for deformity correction and one level for lengthening in the proximal tibia metaphysis. Gradual correction achieves treatment of shortening and carries less risk of peroneal nerve stretch neuropraxia than if attempted with an acute correction.
The use of plates and IM nails requires an acute correction of angular and translational deformity. Acute corrections are particularly useful for modest deformity correction, mobile atrophic nonunions that are opened and bone grafted, and small bone defects that can be acutely shortened. The principal advantage of acute correction is earlier bone contact for healing and more simple fixation construct. Acute corrections are generally better tolerated in the femur and humerus and less well tolerated in the tibia and ankle related to issues of neurovascular insult [11, 38].
Gradual correction with a specialized frame is useful for large deformity correction, associated limb lengthening, bone transport to treat segmental defects [13, 21–23], and stiff hypertrophic nonunion repair [11, 12, 14–16, 19, 20]. Gradual correction uses the principle of distraction osteogenesis commonly referred to as the Ilizarov method [10, 11]. Bone and soft tissue is gradually distracted at a rate of approximately 1 mm/d in divided increments. Bone growth in the distraction gap is called regenerate. The interval between osteotomy and the start of lengthening is called the latency phase and is usually 7 to 10 days. The correction and lengthening is called the distraction phase. The consolidation phase is the time from the end of distraction until bony union. This phase is most variable and is most affected by patient factors such as age and health. If the structure at risk is a nerve such as the peroneal nerve for a proximal tibia valgus deformity or theposterior tibial nerve for an equinovarus deformity of the ankle, gradual correction may be the safer option. The correction can be planned so that the structure at risk is stretched slowly [10, 11, 38]. If nerve symptoms do occur, the correction can be slowed or stopped. Nerve release can be used in select situations based on the response to gradual correction [38].
Treatment options
Ankle arthritis
If the ankle is very stiff and painful, then arthrodesis becomes the most predictable option. Although this type of arthrodesis can be done with an Ilizarov frame, it can be successfully performed more simply using screw fixation. There may be some indication for total ankle replacement in a very select group of patients, namely, the older patient with no history of infection (Table 1).
If the ankle has an arc of at least 30° of motion, the arthritis is moderate, and the patient is not interested in pursuing fusion, then distraction arthroplasty may be a good option. This technique was popularized in the Netherlands and involves placing an external fixation frame across the ankle. Encouraging results have been reported at intermediate term follow-up [40]. Joint distraction is based on the concept that osteoarthritic cartilage hassome reparative activity when there is a release of mechanical stress on the cartilage while intra-articular intermittent fluid pressure is maintained [41]. Our current joint preservation approach includes arthroscopic debridement, anterior exostosis removal, and percutaneous tendo Achillis lengthening (TAL) if these are indicated. In addition, we apply an articulated distraction frame to allow ankle range of motion and the ability to correct contracture in addition to the distraction [42] (Fig. 3). This frame is worn by the patient for 3 months. Weight bearing and ankle motion are encouraged throughout the treatment. Results with this treatment both clinically and radiographically, with an increased joint space, have been encouraging. This treatment does not burn bridges for a possible future need for arthrodesis or ankle replacement. If there is ankle deformity, the distraction can be combined with a supramalleolar osteotomy by adding another level to the frame (Fig. 4).
When there is deformity with its apex at the ankle, correction is done through the fusion. Acute correction is accomplished with removal of a medial or lateral wedge from the plafond for correction of valgus or varus deformity, respectively. Acute correction must be performed with caution and vigilance for neurovascular insult. The Ilizarov frame is very useful in stabilizing flat bony surfaces that lack the congruity of a simple ankle fusion (Fig. 5). Gradual correction is a safer option in setting of large deformity. The prepared ankle fusion site is gradually positioned neutral with the use of a dynamic Ilizarov/Taylor spatial frame.
When both ankle and subtalar joints are affected, there may be an indication to fuse both joints. Selective lidocaine injections of both joints under fluoroscopy can prove useful for preoperative decision making. Both ankle and subtalar joints are prepared for fusion and the Ilizarov frame can be used for compression arthrodesis.
Supramalleolar deformity
In the absence of symptomatic arthritis, correction of the deformity with a supramalleolar osteotomy is performed (Fig. 6). The goal is to correct the deformity in both the coronal and sagittal planes and to achieve a lateral distal tibial angle of 90° and an anterior distal tibial angle of 80° [38, 39]. The use of the Ilizarov/Taylor Spatial Frame is particularly useful for a gradual correction of a simple or large oblique plane deformity.
In the presence of symptomatic arthritis, this may be addressed as well. As mentioned earlier, an ankle distraction can be done distal to the supramalleolar osteotomy with the addition of another level of treatment. If the arthritis is severe and symptomatic, the deformity correction can be done simultaneously with an ankle arthrodesis (Fig. 7). Typically, the arthrodesis would be positioned acutely, and simultaneous gradual correction of the osteotomy would continue above the ankle. If there is a large ankle contracture, the option of gradual correction through the prepared ankle fusion may also be used.
Ankle contracture
The usual contracture is equinus. If it is small, acute correction with TAL may be used. If the contracture is large and especially if it is long-standing, it may be safer to do the correction gradually. After a percutaneous TAL, an Ilizarov frame is applied across the ankle and hinges are placed in line with the axis of the ankle [38]. This is a doubly oblique plane that passes from the tip of the lateral malleolus to the tip of the medial malleolus through the center of the talus (Fig. 8). The TSF and a virtual hinge may also be used. Correction of the contracture is accomplished by gradually moving the rings parallel to each other. Use of a constrained frame with hinges prevents compression of the ankle articular surfaces during the correction. The posterior tibial nerve is undergoing stretch within the tarsal tunnel during this correction. The gradual approach allows the speed of the correction to be adjusted accordingly and decreases the likelihood of a stretch neuropraxia. If signs and symptoms of stretch neuropraxia are present despite slowing the correction, then a tarsal tunnel release is performed.
Associated supramalleolar deformity may be addressed at the same time. A common presentation is a recurvatum deformity above the ankle combined with an equinus contracture of the ankle. The foot appears plantigrade and anteriorly translated. Acute or gradual correction of both the bony deformity above the ankle and the contracture of the ankle can be accomplished with a 2-level Ilizarov/Taylor Spatial Frame (Fig. 9).
If there is associated arthritis of the ankle, this can be addressed with either a simultaneous fusion or a distraction. This depends on the severity of the arthritis and the physician/patient decision for joint preservation or fusion.
Supramalleolar nonunion
An excellent application of gradual correction is for a hypertrophic stiff nonunion with deformity. This type of nonunion has fibrocartilage tissue in the nonunion and has biologic capacity for bony union. It lacks stability and axial alignment. Gradual distraction to achieve normal alignment results in bone formation (Fig. 10). The nonunion acts like regenerate and bony healing occurs. Modest lengthening of no more than 1.5 cm should be done through the nonunion. If additional lengthening is needed, a second osteotomy for lengthening is performed. Several studies have confirmed Ilizarov’s success with this technique [11, 12, 14–16, 19, 20]. The principle advantages are the option of not having to open the nonunion site in the face of poor skin and widened callus and the gain in length through an opening wedge correction. This is particularly beneficial to the region above the ankle where the soft tissue envelope is often compromised. This technique is not useful for mobile atrophic nonunions and less applicable to infected nonunions.
Atrophic nonunions (Fig. 11a) have fibrous tissue at the nonunion site and tend to be mobile. This is often the situation after previous open surgery wherein surgical exposure may have compromised the bone healing biology. Treatment needs to be directed toward improving both the biology and the mechanical environment to achieve bony union. Normotrophic nonunions have both fibrous tissue and fibrocartilage and are partially mobile (Fig. 11b). Atrophic and even normotrophic nonunions should be exposed, bone ends should be contoured so there is healthy bleeding bone on both sides with good contact, and IM canals should be opened. Stripping of soft tissue should be performed within moderation. Acute correction of deformity should be followed by bone grafting and stable fixation with compression. This can be accomplished with a plate, IM nail, or a frame depending on surgeon preference and location. Compression plating of aseptic nonunions has been used successfully [5]. In contrast to acute fracture treatment wherein rigid stability is not necessarily the goal [43], the goal for stabilization of nonunions should be a relatively rigid construct [5, 11].
Circular external fixation can also be useful for atrophic and normotrophic nonunions. In the case of an atrophic nonunion, the frame is used for stabilization after acute correction and an open approach. A positive feature of using a frame is that in addition to the ability to acutely compress the nonunion in surgery, one can add more compression during the postoperative period. The frame is also stable enough to allow full weight bearing right after surgery [11, 17, 25]. Normotrophic nonunions can also be approached in another fashion with the use of gradual correction. The nonunion can be approached in a minimally invasive fashion through 1- to 2-cm incisions. With the aid of intraoperative fluoroscopy, the nonunion can be mobilized with an osteotome and the IM canals can be opened by using a cannulated drill and curettes. Bone graft can then be inserted. The frame is then applied and used to gradually correct the deformity (angulation and translation). Once this is accomplished, axial compression is then performed. Full weight bearing is allowed immediately after surgery. If additional length is needed, an osteotomy for gradual lengthening can be performed at a different site.
Nonunions after tibial pilon fractures can result in metaphyseal nonunion combined with ankle arthrosis (Fig. 12). Infection, poor soft tissue, and retained hardware often complicate these situations. Treatment should be directed toward repair on the distal tibia, correction of deformity, and ankle arthrodesis if necessary. This can be accomplished with internal [5] or external fixation [28–30]. If bone resection is needed as in the case of infection, then ankle fusion and simultaneous tibia lengthening can be done with the Ilizarov method [11, 31].
Infection
Infected nonunions are most complex. Typically, these are atrophic and mobile; however, they can also be stiff and hypertrophic. Infected nonunions should typically be approached in an open fashion. The goals of surgery are to remove all dead bone, open the IM canals, oppose bleeding bone surfaces, and correct the deformity. The patient should ideally have been off all antibiotics for several weeks and multiple intraoperative cultures and pathology specimens are sent to the laboratory at the time of surgery. The nonunion is then mechanically stabilized. With the help of an infectious disease consultant, treatment of chronic osteomyelitis is rendered. This usually consists of culture-specific intravenous antibiotics for 6 weeks followed by an oral regimen. Removal of dead bone is needed to eradicate infection. Bone graft should not be used at the primary surgery. Antibiotic beads can be used for dead space management and local antibiotic delivery. Several weeks later, the beads can be removed and the nonunion can be bone grafted. The use of absorbable antibiotic beads made of calcium sulfate has been advocated by some to avoid the need for removal and subsequent bone grafting [44]. If acute shortening is performed and there is little dead space or purulence, antibiotic beads are not used.
Stabilization can be accomplished with a plate, IM rod, or an external frame. All of these methods have been used successfully; however, internal fixation has the disadvantage of adding foreign material to the infected site and is fraught with risk. The use of external fixation is my preferred approach in most cases of infection. It has the advantage of not adding foreign material to the infection site and can be used to treat more complex situations. If debridement of the nonunion results in a bone defect, the frame can be used for bone transport (Fig. 13) or acute shortening and gradual lengthening [11, 22, 27, 32].
Staging treatment
Staging the treatment is an important strategy for nonunion management. In case of infection, antibiotic beads may be removed after several weeks and bone graft inserted. In the situation of bone debridement resulting in a bone defect, one may choose to do a gradual or acute shortening with a frame. An osteotomy for lengthening can be done several weeks later after the infection is cleared and after the patient and surgeon have decided on the option of lengthening vs the use of a shoe lift. This has the advantage of protecting the osteotomy site from contamination. In addition, it is often difficult to predict the precise amount of bone resection needed. Once this is known, the patient and surgeon can make a more informed decision about lengthening.
When bone transport is used to treat a bone defect, the docking site should be prepared when there is about 1 cm of gap. Preparation of the docking site includes debridement offibrous tissue, realignment of bone ends to maximize bony contact and minimize deformity, and addition of bone graft. This improves the rate of bony union [22].
If the soft tissue coverage is poor, flap coverage [24, 27]or the use of a vacuum-assisted closure [45, 46] device may be needed. A staged approach with the plastic surgeon can be helpful. For example, one may do a debridement of bone and soft tissue and apply a simple frame that allows your plastic surgeon access to the wound. After flap coverage has been accomplished, one can then go back and perform bone transport for a bone defect or elevate the flap after several weeks and bone graft the nonunion site.
Mismatched columns of the ankle
The tibia may shorten relative to the fibula. This can be observed as a nonunion or malunion of the tibial plafond. This will lead to abnormal stress transmission across the ankle and premature arthritis [3]. In a normal situation, a transmalleolar line will intersect a middiaphyseal line of the tibia at 83° [38]. Variation from this measurement signifies shortening of the tibia or fibula. This may present after treatment of a pilon fracture with fibula plating and spanning external fixation and percutaneous screws for the tibia. The fibula heals out to length and the tibia settles with relative shortening and varus deformity. Treatment consists of lengthening and correction of the tibial deformity relative to the fibula. This is accomplished with an Ilizarov frame with the distal leg ring fixed to only the tibia and not the fibula. This setup provides the potential for relative lengthening of the tibia through an osteotomy inthe case of a malunion or through the nonunion itself (Fig. 14).
Alternatively, the fibula may shorten relative to the tibia. This will occur if the fibula is initially fixed short immediately after the trauma or if it is not fixed and gradually shortens during healing. In this situation, fibula lengthening may be accomplished gradually with distraction osteogenesis. Once the length is correct, syndesmosis screws can be inserted to maintain the length and the frame is removed [47] (Fig. 15).
Associated tibial shaft problem
An example of this would be malunion of the tibia that is associated with ankle arthritis. Recurvatum deformity of the tibia will lead to uncovering of the talus, abnormal forces across the ankle, equinus contracture, and arthritis. Two-level Ilizarov treatment can be used to correct the tibial deformity and achieve ankle fusion with acute or gradual correction (Fig. 16). If there is shortening of the tibia, this can be addressed at the same time as the deformity correction at the apex of the deformity. An osteotomy [48] at the proximal tibia for lengthening can be done if the bone healing potential at the apex of deformity is not optimal (Fig. 17).
Bone loss
Bone loss from the tibia plafond is the result of the trauma or subsequent infection. This may be associated with the need for an ankle fusion. If a fusion is needed, then a bone transport ankle fusion is done (Fig. 18). Alternatively, acute shortening and fusion of the ankle is done, and gradual lengthening of the tibia follows [31]. In case of infection, there is an advantage to delaying the proximal tibia lengthening for a few weeks. This allows treatment of the infection with culture-specific antibiotics, a better appreciation for the amount of lengthening that is needed, and a safer environment for the proximal tibia lengthening with less chance of contamination.
Bone loss from the talus can be the consequence of necrosis and osteomyelitis. This can lead to the need to remove the talus. Ankle fracture in a neuropathic patient can lead to a Charcot ankle with collapse and destruction of the talus. In either situation, a tibia to calcaneus ankle fusion is needed. This will usually lead to about 4 cm of shortening. Since 1 cm of shortening is desirable with an ankle fusion, the patient can undergo a simultaneous 3-cm proximal tibia lengthening or use a shoe lift. The tibia to calcaneus contact can be achieved acutely or gradually (Fig. 19). Gradual shortening is safer in terms of neurovascular insult.
Surgical techniques
The Ilizarov/Taylor Spatial Frame can have several levels as needed including proximal tibia, middle tibia, talus, and calcaneus. The number of levels used depends on the personality of the PTA (Fig. 2). A base of typically 2 rings is placed along the axis of the middle tibia. Each ring is usually fixed with 2 points of fixation with 1.8-mm smooth tensioned wires and/or 6-mm half pins (Fig. 20). This can be modified to one ring if less fixation is needed. The remainder of the construct depends on the particular situation. A distal tibia ring is used for a supramalleolar osteotomy. A foot ring with hinges is used for ankle distraction or contracture correction. A foot ring with compression across the ankle is used for arthrodesis. A proximal tibia ring is for proximal tibia lengthening or deformity correction.
Ilizarov frame considerations
The frame should be applied to the leg so that rings are perpendicular to the bone axis, the rods are parallel to the bone axis, and there is adequate clearance between the soft tissues and the rings especially at the posterior leg. The bone defect edges should be perfectly pointed toward each other to avoid deformity and to optimize contact at the anticipated docking site. If deformity should occur, this can be managed with frame modification and/or a surgical procedure to optimize contact at the docking site.
Taylor Spatial Frame considerations
Rings are placed on either side of the defect site and the anticipated lengthening site(s). The rings can be placed independently to optimally fit the leg. This is called the rings-first method. One ring is chosen as the reference ring for each level of movement, and it is important that this ring be placed orthogonal to the axis of the tibia. Mounting parameters are defined by the center of the reference ring and this will define the point in space where the deformity correction will occur. It is important to maintain enough distance between rings so that the struts can fit properly. In this frame, one is limited by the shortest length of strut. The advantages of this frame are that the application is easier and the fit on the leg is better when using the rings-first method. Also, residual deformity at the lengthening and docking sites can be addressed by using the same frame to correct angulation and translation simultaneously in the coronal, sagittal, and axial planes without major frame modification. This allows precise docking with optimal bone contact and minimizes angular deformity at the docking and lengthening sites [16].
Ankle distraction
The frame includes a proximal circular ring placed about 8 cm above the ankle joint, a foot ring, and hinges at the ankle joint.
The proximal ring is positioned perpendicular to the axis of the tibial shaft. A temporary smooth K-wire is inserted through the talus from the center of the tip of the fibula and then directed to the center of the tip of the medial malleolus in a proximal and anterior direction. This is then checked under the fluoroscope to ensure proper placement. This is perhaps the most crucial portion of the procedure because it marks the true oblique axis of the ankle joint. This wire will mark the hinge position to allow the talus to move smoothly within the mortise as it is distracted.
A foot ring is then secured to the hind foot and midfoot by placing 2 smooth wires in an oblique fashion through the calcaneus and cuneiforms/cuboid, respectively. These are then tensioned and secured as described above. The foot ring is positioned parallel to the plantar surface of the foot. A transverse midfoot wire is inserted and tensioned to the ring.
Using the previously placed guide wire for the true axis of the ankle joint, 2 universal hinges are secured to the foot ring attached at points defined by the temporary joint axis wire. The joint axis wire may then be removed. The hinges are then secured to the proximal ring placed on the tibia using threaded rods and short connection plates. These rods should be perpendicular to the ankle in both the coronal and sagittal planes. A compression/distraction rod is placed anteriorly to control ankle range of motion, thus completing the frame. The ankle joint is then taken through a range of motion under fluoroscopy to ensure smooth symmetric motion of the talus within the mortise. The ankle is then taken through a range of motion under fluoroscopy to check the amount of distraction as well as to double check the alignment. Gradual distraction of 1 mm/d in 4 separate daily adjustments for 1 week is prescribed. A total of 6 to 7 mm of distraction is achieved.
Supramalleolar osteotomy
The middle tibia ring block is applied. A distal tibia ring is fixed with 2 or 3 tensioned 1.8-mm wires and an anteromedial half pin (just medial to the tibialis anterior tendon). The rings are applied to match the deformity. TSF struts are used to connect the rings across the deformity. After a percutaneous osteotomy [18] of the distal tibia and the fibula, a gradual correction of the deformity follows as per the Ilizarov method. If there is an ankle contracture, then a foot ring is placed and gradual correction can be done simultaneously. Hinges are placed at the axis of the ankle as in the situation of an ankle distraction. A pulling rod can be placed anterior or a pushing rod posterior to motor the correction.
Ankle arthrodesis
The ankle is approached in an open fashion, and the joint surfaces are prepared for arthrodesis. This involves removal of remaining cartilage, fibrous tissue, and correction of deformity. Wedge excision from the tibial plafond may be needed for deformity correction. In case of an acute positioning, there should be excellent contact and alignment between the tibia and talus (or calcaneus). The position should be held with provisional wires placed from the bottom of the heel (Fig. 21a).
Compression between the middle tibia ring block and a foot ring is necessary. The foot ring is fixed to 2 oblique calcaneus wires and a midfoot wire. A forefoot wire can be added if extra stability is needed. A talus wire can be used to protect the subtalar joint from compression in the situation of a tibiotalar arthrodesis (Fig. 21b). This is not needed for to tibio-talo-cancaneal arthrodesis or a tibiocalcaneal arthrodesis (Fig. 21c). Compression across the ankle is performed with longitudinal rods in line with the mechanical axis of the leg (Fig. 21d). If there is a desire for gradual correction through the arthrodesis site, this may be done with TSF struts.
Bone transport for infected nonunions
All nonviable bone and soft tissue is debrided. Bone is debrided back to healthy-appearing bone with open IM canals and with bleeding surfaces. This is best done without the use of a tourniquet. Bone cuts are typically made perpendicular to the anatomic axis of the tibia by using a power saw cooled with saline irrigation. A K-wire placed with the help of fluoroscopy is used as a guide for the bone cut. In the adult patient, rings are applied with a combination of 1.8-mm Ilizarov wires and 6-mm hydroxyapatite-coated half pins. Smaller-sized wires and half pins may be used in children. The 1.8-mm wire is placed perpendicular to the axis of the bone in the coronal plane. The ring is attached with about 2-finger-breadth spacing between the skin and the ring and the wire is tensioned to 130 kg. The half pin is then placed setting the ring perpendicular to the sagittal plane bone axis. A ring block is either 1 or 2 rings. Each ring block should have a combination of 3 to 4 wires and/or half-pins. In situations where there is a very short proximal or distal tibia segment, consideration should be given to extending the fixation across the knee or ankle. This strategy is most commonly used for a short distal tibia segment with extension of the frame to the foot, at least temporarily.
With the monofocal approach, there is one level of activity. A ring block is applied both proximal and distal to the defect. The space between the innermost rings is chosen so that after docking there will be adequate room to approach the docking site for possible bone grafting or wound revision surgery. Ideally, this space should be greater than 5 cm. Connecting rods or struts are placed between the innermost rings to be used for compression or gradual shortening. The fibula must have a defect that is comparable to the tibial defect. A modest amount of acute shortening may be done. Pulses should be checked to make sure that this does not cause any vascular compromise. Limb shortening will occur.
With the bifocal approach, there are 2 segments with activity. One segment (the defect) is undergoing compression/shortening, and one segment (the bony regenerate) is undergoing distraction/lengthening. This can maintain the length of the limb. A ring block is applied on either side of the bone defect. The space between the innermost rings is chosen so that after docking there will be adequate room to approach the docking site for possible bone grafting or wound revision surgery. Connecting rods or struts are placed between the innermost rings to be used for compression or gradual shortening. Another ring block is placed on the other side of the anticipated lengthening osteotomy site. Rods or struts are applied across this segment and are set up for lengthening or distraction. The rods are then disconnected in preparation for the osteotomy. The osteotomy is done in a percutaneous fashion [48] using either the multiple drill hole and osteotome technique or the Gigli saw technique. Care is taken to perform this osteotomy outside the zone of injury in healthy bone. Ideally this osteotomy is done in the metaphyseal bone. The proximal metaphyseal location is preferable to the distal metaphysis because of increased bone regeneration potential [10].
In conclusion, the PTA has many faces. After analysis of the personality of the ankle, one can implement a rational modular treatment approach. The Ilizarov method can be used to comprehensively address the PTA with distraction, correction of bony deformity and soft tissue contracture, osteotomy, arthrodesis, and lengthening.
References
TO McKinley MJ Rudert DC Koos Y Tochigi TE Baer TD Brown (2004) ArticleTitlePathomechanic determinants of posttraumatic arthritis Clin Orthop 427 IssueIDSuppl S78–S88 Occurrence Handle15480080
DB Thorardson (2000) ArticleTitleComplications after treatment of tibial pilon fractures: prevention and management strategies J Am Acad Orthop Surg 8 IssueID4 253–265 Occurrence Handle10951114
DB Thorardson S Motamed T Hedman E Ebramzadeh S Bakshian (1998) ArticleTitleThe effect of fibular malreduction on contact pressures in an ankle fracture malunion model J Bone Joint Surg Am 80 IssueID9 1395–1396
SM Teeny DA Wiss (1993) ArticleTitleOpen reduction and internal fixationof tibial plafond fractures. Variables contributing to poor results and complications Clin Orthop 292 108–117 Occurrence Handle8519097
KR Chin DG Nagarkatti MA Miranda VM Santoro MR Baumgaertner JB Jupiter (2003) ArticleTitleSalvage of distal tibia metaphyseal nonunions with the 90 degrees cannulated blade plate Clin Orthop 409 241–249
J Richmond K Colleran O Borens P Kloen DL Helfet (2004) ArticleTitleNonunions of the distal tibia treated by reamed intramedullary nailing J Orthop Trauma 18 603–610 Occurrence Handle10.1097/00005131-200410000-00005 Occurrence Handle15448449
S Green (1994) ArticleTitleSkeletal defects: A comparison of bone grafting and bone transport for segmental skeletal defects Clin Orthop 301 111–117 Occurrence Handle8156661
SA Green JM Jackson DM Wall H Marinow J Ishkanian (1992) ArticleTitleManagement of segmental defects by the Ilizarov intercalary bone transport method Clin Orthop 280 136–142 Occurrence Handle1611733
DS Feldman S Shin S Madan K Koval (2003) ArticleTitleCorrection of tibial malunion and nonunion with six-axis analysis deformity correction using the Taylor spatial frame J Orthop Trauma 17 549–554 Occurrence Handle10.1097/00005131-200309000-00002 Occurrence Handle14504575
GA Ilizarov (1989) ArticleTitleThe tension-stress effect on the genesis and growth of tissues. Part 1. The influence of stability of fixation and soft-tissue preservation Clin Orthop 238 249–281 Occurrence Handle2910611
GA Ilizarov (1992) Pseudoarthrosis and defects of long bones GA Ilizarov (Eds) Transosseous osteosynthesis. Theoretical and clinical aspects of regeneration and growth of tissue EditionNumber1 Springer-Verlag Berlin Heidelberg, New York 454–494
M Kocaoglu L Eralp C Sen M Cakmak H Dincyurek SB Goksan (2003) ArticleTitleManagement of stiff hypertrophic nonunions by distraction osteogenesis J Orthop Trauma 17 543–548 Occurrence Handle10.1097/00005131-200309000-00001 Occurrence Handle14504574
D Paley MA Catagni F Argnani A Villa GB Benedetti R Cattaneo (1989) ArticleTitleIlizarov treatment of tibial nonunions with bone loss Clin Orthop 241 146–165 Occurrence Handle2924458
D Paley M Chaudray AM Pirone et al. (1990) ArticleTitleTreatment of malunions and mal-nonunions of the femur and tibia by detailed preoperative planning and Ilizarov techniques Orthop Clin N Am 21 667–691
SR Rozbruch JE Herzenberg K Tetsworth HR Tuten D Paley (2002) ArticleTitleDistraction osteogenesis for nonunion after high tibial osteotomy Clin Orthop 394 227–235 Occurrence Handle11795738
SR Rozbruch DL Helfet A Blyakher (2002) ArticleTitleDistraction of hypertrophic nonunion of the tibia with deformity using the Ilizarov/Taylor Spatial Frame Arch Orthop Trauma Surg 122 295–298 Occurrence Handle10.1007/s00402-001-0370-7 Occurrence Handle12070651
H Shtarker G Volpin J Stolero A Kaushansky M Samchukov (2002) ArticleTitleCorrection of combined angular and rotational deformities by the Ilizarov method Clin Orthop 402 184–195 Occurrence Handle12218483
J Schatzker M Tile (1987) The rationale of operative fracture care Springer-Verlag Berlin Heidelberg, New York
MA Catagni F Guerrischi JA Holman R Cattaneo (1994) ArticleTitleDistraction osteogenesis in the treatment of stiff hypertro- phic nonunions using the Ilizarov apparatus Clin Orthop 301 159–163 Occurrence Handle8156667
M Saleh S Royston (1996) ArticleTitleManagement of nonunions of fractures by distraction with correction of angulation and shortening J Bone Joint Surg Br 78 105–109 Occurrence Handle8898138
R Cattaneo M Catagni EE Johnson (1992) ArticleTitleThe treatment of infected nonunions and segmental defects of the tibia by the methods of Ilizarov Clin Orthop 280 143–152 Occurrence Handle1611734
D Paley DC Maar (2000) ArticleTitleIlizarov bone transport treatment for tibial defects J Orthop Trauma 14 IssueID2 76–85 Occurrence Handle10.1097/00005131-200002000-00002 Occurrence Handle10716377
HR Song SH Cho KH Koo et al. (1998) ArticleTitleTibial bone defects treated by internal bone transport using the Ilizarov method Int Orthop 22 IssueID5 293–297 Occurrence Handle10.1007/s002640050263 Occurrence Handle9914931
D Smrke ZM Arnez (2000) ArticleTitleTreatment of extensive bone and soft tissue defects of the lower limb by traction and free-flap transfer Injury 31 153–162 Occurrence Handle10.1016/S0020-1383(99)00253-3 Occurrence Handle10704579
V Schwartsman SH Choi R Schwartsman (1990) ArticleTitleTibial nonunions. Treatment tactics with the Ilizarov method Orthop Clin North Am 21 IssueID4 639–653 Occurrence Handle2216399
DR Marsh S Shah J Elliot et al. (1997) ArticleTitleThe Ilizarov method in nonunion malunion and infection of fractures J Bone Joint Surg Br 79 IssueID2 273–279 Occurrence Handle10.1302/0301-620X.79B2.6636 Occurrence Handle9119856
LB Gayle WC Lineaweaver A Oliva PP Siko BS Alpert GM Buncke K Yim HJ Buncke (1992) ArticleTitleTreatment of chronic osteomyelitis of the lower extremities with debridement and microvascular muscle transfer Clin Plast Surg 19 IssueID4 895–903 Occurrence Handle1339644
D Katsenis A Bhave D Paley JE Herzenberg (2005) ArticleTitleTreatment of malunion and nonunion at the site of an ankle fusion with the Ilizarov apparatus J Bone Joint Surg Am 87 IssueID2 302–309 Occurrence Handle15687151
EE Johnson J Weltmer GJ Lian A Cracchilo SuffixIII (1992) ArticleTitleIlizarov ankle arthrodesis Clin Orthop 280 160–169 Occurrence Handle1611737
BJ Hawkins RJ Langerman DM Anger JH Calhoun (1993–1995) ArticleTitleThe Ilizarov technique in ankle fusion: A preliminary report Bull Hosp Joint Dis 53 IssueID4 17–21
K Sakurakichi H Tsuchiya K Uehara T Kabata T Yamashiro K Tomita (2003) ArticleTitleAnkle arthrodesis combined with tibial lengthening using the Ilizarov apparatus J Orthop Sci 8 IssueID1 20–25 Occurrence Handle10.1007/s007760300003 Occurrence Handle12560881
D DiPasquale MG Ochsner AM Kelly et al. (1994) ArticleTitleThe Ilizarov method for complex fracture nonunions J Trauma 37 IssueID4 629–634
NA Ebraheim MC Skie WT Jackson (1995) ArticleTitleThe treatment of tibial nonunion with angular deformity using an Ilizarov device J Trauma 38 IssueID1 111–117 Occurrence Handle7745640
Lonner JH, Koval KJ, Golyakhovsky V (1995) Posttraumatic nonunion of the distal tibial metaphysis; treatment using the Ilizarov circular external fixator. Am J Orthop Suppl:16–21
SR Rozbruch A Blyakher SB Haas R Hotchkiss (2003) ArticleTitleCorrection of large bilateral tibia vara with the Ilizarov method J Knee Surg 16 IssueID1 34–37 Occurrence Handle12568264
G Hosny MS Shawky (1998) ArticleTitleThe treatment of infected non-union of the tibia by compression-distraction techniques using the Ilizarov external fixator Int Orthop 22 IssueID5 298–302 Occurrence Handle10.1007/s002640050264 Occurrence Handle9914932
CL Saltzman GY el-Khoury (1995) ArticleTitleThe hindfoot alignment view Foot Ankle Int 16 572–576
D Paley (2002) Principles of deformity correction EditionNumber1 Springer Berlin Heidelberg, New York
D Paley JE Herzenberg K Tetsworth et al. (1994) ArticleTitleDeformity planning for frontal and sagittal plane corrective osteotomies Orthop Clin North Am 25 425–465 Occurrence Handle8028886
AC Marijnissen PM Roremund Particlevan J Melkebeek Particlevan et al. (2002) ArticleTitleClinical benefit of joint distraction in the treatment of severe ankle osteoarthritis: Proof of concept in an open prospective randomized controlled study Arthritis Rheum 46 IssueID11 2893–2902 Occurrence Handle10.1002/art.10612 Occurrence Handle12428229
FP Lafeber JP Veldhuijzen JL Roy Particlevan et al. (1992) ArticleTitleIntermittent hydrostatic compressive force stimulates exclusively the proteoglycan synthesis of osteoarthritic human cartilage Br J Rheumatol 31 437–442 Occurrence Handle1628164
JI Inda A Blyakher MJ O’Malley SR Rozbruch (2003) ArticleTitleDistraction arthroplasty for the ankle using the Ilizarov frame Tech Foot Ankle Surg 2 IssueID4 249–253 Occurrence Handle10.1097/00132587-200312000-00005
SR Rozbruch U Muller E Gautier R Ganz (1998) ArticleTitleThe evolution of femoral shaft plating technique Clin Orthop 354 195–208 Occurrence Handle10.1097/00003086-199809000-00024 Occurrence Handle9755780
MD McKee LM Wild EH Schemitsch JP Waddell (2002) ArticleTitleThe use of an antibiotic-impregnated, osteoconductive, bioabsorbable bone substitute in the treatment of infected long bone defects: Early results of a prospective trial J Orthop Trauma 16 IssueID9 622–627
D Herscovici SuffixJr RW Sanders JM Scaduto A Infante T DiPasquale (2003) ArticleTitleVacuum-assisted wound closure (VAC therapy) for the management of patients with high-energy soft tissue injuries JOrthop Trauma 17 683–688 Occurrence Handle10.1097/00005131-200311000-00004
M Wongworawat SB Schball PD Holtom C Moon F Schiller (2003) ArticleTitleNegative pressure dressings as an alternative technique for treatment of infected wounds Clin Orthop 414 45–48 Occurrence Handle12966275
SR Rozbruch M DiPaoli AA Blyakher (2002) ArticleTitleFibula lengthening using a modified Ilizarov method Orthopedics 25 IssueID11 1241 Occurrence Handle12452340
D Paley K Tetsworth (1991) ArticleTitlePercutaneous osteotomies. Osteotome and Gigli saw techniques Orthop Clin North Am 22 613–624 Occurrence Handle1945339
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rozbruch, S.R. Posttraumatic Reconstruction of the Ankle Using the Ilizarov Method. HSS Jrnl 1, 68–88 (2005). https://doi.org/10.1007/s11420-005-0113-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11420-005-0113-3