Abstract
The advent of molecular biological techniques and a developing environmental awareness initiated a renewed scientific interest in Polyhydroxyalkanoates (PHAs) and the biosynthetic machinery for PHA metabolism has been the area of research over the last two decades. PHAs are polyesters of hydroxyalkanoates synthesized by numerous bacterial species with atleast five different PHA biosynthetic pathways. These are accumulated as an intracellular carbon and energy storage material. This diversity, in combination with genetic and molecular engineering has opened up this area for development of optimum PHA producing organisms. Even though PHAs have been recognized as a good candidate for biodegradable plastics, their industrial application is limited owing to high production cost. The classical microbiology and modern molecular biology have been brought together to decipher the intricacies of PHA metabolism both for production purposes and for the unraveling of the natural role of PHA. This review provides an overview of the different PHA biosynthetic systems, the enzymes involved in PHA biosynthesis and there genetic background followed by a detailed summation of how this natural diversity is being used to develop commercially attractive recombinant process for large scale production of PHAs.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Synthetic plastics are resistant to degradation and consequently their disposal is fuelling an international drive for the development of biodegradable polymers. Biodegradable plastics are polymers, which undergo degradation particularly by enzymes into CO2 and H2O under aerobic conditions and into methane and inorganic compounds under anaerobic conditions. The same can be measured by standardized tests, in a specified time period, reflecting available disposable conditions.
Biodegradable plastics are largely divided into three categories:
-
(1)
Chemically synthesized polymers: These are susceptible to microbial attack and can’t be used as commercial plastics because their properties like biodegradability and melting point differs e.g. Polyglycollic acid, poly (e-caprolactone), polyvinyl alcohol etc.
-
(2)
Starch based biodegradable plastics: These polymers are partially degradable because starch particals act as a linkage between the plastic matrix and are the sites of enzyme action and the residue left after degradation are recalcitrant (Khanna and Srivastava 2005).
-
(3)
Polyhydroxyalkanoates (PHA): These are aliphatic polyesters of hydroxyalkanoates, similar to conventional plastics and are naturally produced via a microbial process on nutrient limiting medium (nitrogen and phosphorus) but with a surplus of sugar which serve as carbon and energy source.
The general structure of PHA consist of 3-hydroxy fatty acid monomers arranged in head to tail manner i.e. the carboxylic group of one monomer form an ester bond with the hydroxyl group of the neighboring monomers. (Fig. 1)
The hydroxyl substituted carbon atom is of R-configuration when it shows chirality. At C-3 or β-position an aromatic/unsaturated/halogenated/epoxidized/branched alkyl group is present. Substitutions in this alkyl side chain leads to formation of a new polymer e.g. incorporation of Cynophenylvalerate and 4, 5, 6 hydroxy acid results in formation of a diverse PHA polymer family (Madison and Huisman 1999).
Depending upon the number of carbon atom present in the side chain, PHAs are divided mainly into two groups:
-
(A)
Short side chain (ssc)
-
(B)
Medium side chain (msc)
Short side chain (ssc) consists of 3–5 carbon atoms whereas 6–14 carbon atoms are present in medium side chain (msc) (Anderson and Dawes 1990). The difference lies in the substrate used and specificity of the enzyme PHA synthase to accept hydroxyalkanoates to a certain range. The ssc is produced by polymerization of 3-hydroxyalkanoate and msc is produced by polymerization of acetyl CoA (Steinbuchel 1991; Steinbuchel and Hein 2001).
Current problems in PHA Production
The major obstacle for the commercial production of PHA is the high cost of sustainable biotechnological process, which includes the product yield, the process of final product separation and the equipment costs relative to petroleum derived plastics (Sudesh et al. 2000).
PHAs can be recovered and purified from biomass by a number of different techniques mostly, which involves mechanical (heat treatment) and chemical (cell disruption) followed by chemical (hypochlorite) and enzymatic treatment. Although these methods are applicable in small-scale fermentation systems, there are drawbacks for large-scale production of PHAs since hypochlorite causes limited hydrolysis of PHA while heat treatment and use of enzyme cocktails are costly (Zhuang et al. 1999). One of the major drawbacks for the commercial PHA production is to maintain the special growth conditions required for PHA synthesis usually unbalanced nutrient conditions that cause slow growth (Byrom 1987). Also additional feeds added in the fermentor, add to the cost as they expand the infrastructure and impose additional quality control.
Monomer precursors are added in very controlled manner for the stable PHA synthesis in recombinant E. coli. The expression of all the genes involved in the pathway should be adequate and have to be expressed from extrachromosomal DNA such as in plasmid and therefore depend upon high copy number and high expression level. But for large-scale fermentation, maintenance of the plasmid and stable expression are the major drawbacks (Huisman et al. 2006).
Even though the price of the PHA is still too high, current advances in fermentation and purification technology as well as the development of superior bacterial strains by recombinant DNA technology are likely to lower the price of PHA. The isolation and development of bacterial strains that can utilize cheap carbon substrates should be opted intensively, but eventually metabolic engineered bacterial strains may likely surpass the wild type bacteria currently in use.
Polyhydroxyalkanoates biosynthesis
The most extensively produced microbial bioplastics are Polyhydroxyalkanoates (PHA), Polyhydroxybutyrate (PHB) and their derivatives. Much other polyester can also be produced by microorganisms and most of them utilize similar biosynthetic machinery. However these polyesters lacks large-scale applications (Ha and Cho 2002) and hence this review concentrates only about PHAs and PHBs.
There are four different pathways for PHA synthesis (Steinbuchel 1991), which consist of three enzymatic reactions catalyzed by successive action of β-Ketoacyl-CoA thiolase (phbA), acetoacetyl CoA (phbB), P(3HB) polymerase (phbC) (Madison and Huisman 1999). These different pathways are explained below with respect to the different microorganisms in which they are found.
Biosynthetic pathway in Ralstonia eutropha (Alcaligenes eutrophus)
In R. eutropha, metabolism of carbohydrates leads to the biosynthesis of PHA. The first reaction involves condensation of two acetyl Coenzyme A (acetyl CoA) molecules into acetoacetyl CoA by β-Ketoacyl-CoA thiolase or β-Ketothiolase enzyme, encoded by phbA gene. In the second step the stereospecific reduction of acetoacetyl CoA to R-3-hydroxybutyryl CoA by an NADPH dependent acetoacetyl CoA dehydrogenase or reductase, encoded by phbB gene takes place. The final reaction involves the polymerization or incorporation of R-3-hydroxybutyryl CoA enantiomer into poly 3-hydroxybutyrate by P(3HB) polymerase or PHB synthase, encoded by phbC gene (Anderson and Dawes 1990; Cevallos et al. 1996) (Fig. 2).
Biosynthetic pathway in Rhodopseudomonas rubrum
This is the second type of pathway, which is found in Rhodopseudomonas rubrum. In R. rubrum, β-oxidation of fatty acid leads to the biosynthesis of PHA. The first reaction remains the same as that for R. eutropha leading to the formation of acetoacetyl CoA, which is then reduced into l-(+)-3-hydroxybutyryl CoA by a NADH dependent reductase. In the final step l-(+)-3-hydroxybutyryl CoA is converted into d-(−)-3-hydroxybutyryl CoA by two enol CoA hydratase enzymes (Khanna and Srivastava 2005) (Fig. 3).
Biosynthetic Pathway in Pseudomonas group I
This is the third type of PHA biosynthetic pathway, which is found in most Pseudomonas species, belonging to rDNA homology group-I e.g. P. oleovorans. In these organisms fatty acid β-oxidation of alkanes, alkanols or alkanoic acids leads to the synthesis of medium side chain (msc) PHAs.
Biosynthetic pathway in Pseudomonas group II
This is the fourth type of PHA biosynthetic pathway found in Pseudomonas belonging to rDNA homology group-II. Synthesis of PHA results from Denovo fatty acid synthesis pathway which involves the synthesis of copolymers of medium side chain (msc) 3-hydroxyalkanoates (3HA) from acetyl CoA (Fig. 4).
Genetic level studies
The organization of the genes and enzymes involved in the biosynthesis of PHA varies from organism to organism. Due to the increasing diversity of PHA biosynthetic pathways, it is not surprising that the PHB loci have diverged considerably. The loci encoding the genes for PHA formation have been characterized from 18 different species.
In Alcaligenes latus, Pseudomonas acidophila, and Ralstonia eutropha the phbCAB genes are arranged tandemly on the chromosome, whereas in Acinetobacter species the phbCAB gene are not present in the same order, however all of them consist of complete CAB operon (Peoples and Sinskey 1989; Umeda et al. 1998) (Fig. 5a).
In Zoogloea ramigera, Paracoccus denitrificans and Rhizobium meliloti the phbC and phbAB loci are unlinked or interrupted i.e. phbA and phbB together form an operon whereas phbC is located elsewhere in the chromosome (Lee et al. 1996; Tombolini et al. 1995) (Fig. 5b).
In Chromatium vinosum, Thiocystis vinolaceae and Synechocystis sp. two genes phbE and phbC encodes the two-subunit enzyme PHA polymerase. phbEC and phbAB are present in one loci but there orientations are opposite (Hein et al. 1997; Liebergesell and Steinbuchel 1992) (Fig. 5c).
In Methylobacterium extorquens, Nocardia corallina, Rhizobium etli and Rhodococcus ruber an additional gene phbP is present with an unknown function in the PHB regulation. Here also phbCP and phbAB are present in the same locus but with different orientations therefore only the PHB polymerase encoding gene phbC has been identified so far (Hustede and Steinbuchel 1993) (Fig. 5d).
In Aeromonas caviae the PHB polymerase encoding gene phbC has a flanking gene phbJ, which provides monomer for the enzyme (Fukui et al. 1998) (Fig. 5e).
In Pseudomonas oleovorans and P. aeruginosa the phb loci is having two phbC gene i.e. phbC1 and phbC2. These two genes are separated by an additional gene phbZ, which encodes intracellular PHA depolymerase enzyme. The enzymes encoded by phbC1 and phbC2 are identical in their primary structure and have almost similar substrate specificity (Huisman et al. 1991; Timm et al. 1990).
In C. vinosum, P. acidophila, R. eutropha, R. meliloti and T. violacea an additional gene phbF is present with an unknown function in PHA regulation (Povolo et al. 1996). In P. acidophila, R. eutropha and Z. ramigera have a gene present upstream of phbCAB operon and which is identical to the hypothetical E. coli protein YfiH.
During the course of evolution, phbC gene was sometimes arranged with genes that supply monomers like phbAB or phaJ and sometimes with genes involved in PHA regulation like phbZ. Evolutionary forces resulted in the clustering of phb genes in an operon with same transcriptional units as in P. acidophila, R. eutropha, Acinetobacter, A. latus, A. caviae and at times in separate transcriptional units as in Z. ramigera, P. denitrificans, R. meliloli, C. vinosum, T. violaecae, P. oleovorans, P. putida etc. On the other hand some resulted in diversely oriented additional or flanking phbF and phbP genes. In C.vinosum and T.violacea the phbEC gene have neighboring phbA and phbB genes whereas these genes are not present in Synechocystis. Therefore in the course of evolution fusion of phbEC or splicing of phaC may result the rearrangements in the phb loci.
Approaches to metabolic engineering
To realize sustainable industrial processes based on the use of PHA biopolyester, the high manufacturing cost needs to be reduced by establishing an efficient recombinant production system of PHA with desired properties. The strains used for general cloning works and gene expression have been summarized in Table 1.
Construction of recombinant plasmid from Aeromonas caviae
Aeromonas caviae involves three structural genes for PHB biosynthesis, phaC AC encoding PHA synthase, phaJ AC encoding (R)-specific enoyl CoA hydratase and phaP AC encoding a granule associated protein (Fukui et al. 2001).
Plasmid pBSEE32phbAB was constructed for PHB and PHA copolymer biosynthesis. The plasmid vector pBSEE32 was constructed by ligation of EcoRI digested pJRDEE32, a fragment of A. caviae gene containing polycistronic genes for phaPAC (granule associated protein), phaCAC ((R)- specific enoyl-CoA hydratase) with promoter PphaAC and EcoRI site of Bluescript II SK(+). The resultant shuttle digested R. eutropha H16 fragment pBS-phbABRE, containing genes for phaARE (β-ketothiolase) and phaBRE (NADPH dependent acetoacetyl CoA reductase) which results in recombinant plasmid pBSEE32phbAB. For accumulation of P(3HB-co-3HHx) copolyester from dodecanoate, E. coli LS5218[fadR601 ato C(Con)] was used as the host strain (Fig. 6).
An increase in the copolymer fraction were observed for mutants (16–18 mol%) compared to the wild type (10 mol%). Highly active mutants E2-50 and T3-11 of a synthase that is a key enzyme essential for bacterial synthesis of biodegradable polyester, polyhydroxyalkanoate (PHA) have been successively acquired. These mutants exhibited a 6.5- and 3-fold higher PHA productivity as compared to the wild type. There is a biphasic pattern of the relationship between enzyme activity toward 3HB-CoA and PHB content in dry cells, keeping linearity up to a PHB content of ca. 45 wt.% and then gradually reaching a plateau corresponding to a content of ca. 55 wt.%. This suggests that insufficient monomer substrate is supplied for the wild-type and for mutants that exhibit activities exceeding 0.01 U/mg (kichise et al. 2002).
Enhanced PHA production from recombinant Alcaligenes latus
The phbC gene of A. latus was isolated and recombined in an E. coli A. latus shuttle vector plasmid pkTC32 and transformed by electroporation into the parent A. latus in order to amplify the pHB synthase. The isolated phbC gene was ligated to the pSK(+) vector designated as plasmid pAL 32, excised from plasmid PAL32 by Not I/EcoR I double digestion, ligated into the E. coli A. latus shuttle vector plasmid pKT230 and then constructed as a 14.2 kb long recombinant plasmid pkTC32 (Park and Lee 2003).
The enhanced PHB biosynthesis mechanism produced in the transformant A. latus was investigated by measuring the variations of enzyme activities related to the PHB biosynthesis. The maximum concentration and content of PHB in A. latus increased significantly from 3.1 to 3.7 g/l and from 50.2 to 65%, respectively, after the enforcement of its own phbC gene, and the rate of PHB biosynthesis also accelerated significantly. The plasmid stability of the transformant A. latus remained around 85%, which was similar to that of the transformant R. eutropha even though a low concentration of kanamycin was used as the selective pressure. The reintroduced cloned phbC gene had an influence both on the PHB synthase activity and the other two enzyme activities, yet most significantly on the PHB synthase that increased from 3.4 to 4.8 Umg/1 proteins after 30 h. The increased ketothiolase and acetoacetyl-CoA reductase activities may have been due to an accelerated flow of the accumulated intermediates, acetoacetyl-CoA and hydroxybutyryl-CoA in the polymerization of PHB, thereby reducing the product inhibitions as described by Jung and Lee (1997). Accordingly, the amplification of PHB synthase through the transformation of a cloned phbC gene into its parent A. latus would appear to be an effective strain development method for the overproduction of PHB, as previously observed using the transformant R. eutropha.
Accumulation of PHA & PHA-copolymer from genetically manipulated Pseudomonas sp.
A recombinant E. coli is constructed by co-expression of genes of β-Ketothiolase (phbA), acetoacetyl-CoA (phbB) and 3-hydroxyacyl-ACPCoA transacylase (phaG) respectively in E. coli DH5α. Plasmid pBHR69 having phbAB genes was digested with PstI and ligated with pUC18. Digestion of the resulting plasmid pUCAB with KpnI and HindIII resulted in a 2.4 kb phbA and phbB genes fragment, which were ligated into the host vector pBBR1MCS2. The resulting plasmid pPG01 contains phbA and phbB genes under the lacZ promoter P (lac) and kanamycin resistance marker Km(r).
Plasmid pBHR91 was used for the amplification of phaGp p gene. pBHR91 was digested with XbaI and HindIII and the resulting plasmid pLGPp contains the phaGp p gene under a lacZ promoter and ampicillin resistance marker Amp(r).
A recombinant strain of P. putida U (P. putida U Δfad BA-pha Z) was constructed by using plasmid pKB2 for amplification of 892 bp phaZ gene (encoding PHA depolymerase) of P. putida U. This was further subcloned into plasmid pBBR2MCS-3, which replicates autonomously in P. putida U (pMCZ) and was cloned into the hyper expressed vector pQE32 resulting in pQE Depol (Sandoval et al. 2005).
The amount of 3-hydroxyl polyhydroxyalkanoate derivatives accumulated by this recombinant strain were: 1.77 g/l (2.25 g/g cell dry weight (cdw)) of 3-OH-6-phenylhexanoic acid; 1.93 g/l (2.45 g/g cdw) of a mixture of 3-OH-5-phenylvaleric acid (30%) and 3-OH-7-phenylheptanoic acid (70%) and 1.92 g/l (2.44 g/g cdw) of a mixture containing 3-OH-6-phenylhexanoic acid (35%) and 3-OH-8-phenyloctanoic acid (65%). These data indicate that the bioconversion yield of n-PhAs into 3-OH-PhAs using the genetically manipulated strain P. putida ΔfadBA-phaZ is higher (85, 87, and 81%, respectively) than the wild strain (80%).
Overproduction of PHA from Recombinant R. eutrophus
The pBBr1MCS-2 vector (5.52 kb) was linearized at the EcoRI/BamHI site. P. oleovorans PhaC1 excised from pUC19-CAB3 was ligated to pBBr1MCS-2 vector, by digesting both the vectors with EcoRI/BamHI enzymes resulting in the 7.22 kb plasmid pBBr1MCS2phaC po . First two rounds of site directed mutagenesis were performed on phaC po to introduce two unique restriction sites MfeI and MluI at nucleotides 673 (Ile 225) and 1207 (Arg 403), respectively.
The primers phaC FS-A and phaC FS-D contained a PshA1 and a DraIII site, respectively, and therefore, the site directed mutagenized phaC1 po (1.2 kb), containing MfeI and MluI sites, was cloned into the PshAI/DraIII-digested pBBr1MCS-2 phaC po , resulting in the 7.22 kb pBBr1MCS-2 phaC po -III plasmid (pBBr1MCS-2 phaC po I225L). To construct pBBr1MCS-2 phaC po I225L-Linker, a central 540 bp portion of the phaC1 po gene was removed by MfeI and MluI. A 20 bp nucleotide linker flanked by MfeI and MluI restriction sites was digested with same restriction enzymes and ligated into pBBr1MCS-2 phaC po I225L, resulting in the 6.7 kb plasmid pBBr1MCS-2 phaC po I225L-Linker. The pBBr1MCS-2 phaC po I225L-Linker gene was expressed under the control of the phb R.eutropha promoter (Niamsiri et al. 2004).
The recombinant R. eutrophus expressing either wild-type phaC1 po or mutant I225L phaC1 po produced 4.2 g/g PHA content per dcw. The PHAs produced by the I225L PhaC1po mutant consisted mainly of 3-hydroxyocanoate (3HO) (86 mol%) and 3-hydroxyhexanoate (3HHx) (12 mol%), with a partial molar fraction of 3-hydroxybutyrate (3HB) (2 mol%) and traces of 3-hydroxydecanoate and 3-hydroxydeodecanoate. The composition was similar to that of the PHA from wild-type PhaC1po. Differential scanning calorimetry (DSC) showed that both polymers are copolymers and not blends, since both have single (sharp) Tg and Tm values. Tg and Tm were −31 and 54°C, respectively, for PHA from the wild-type PhaC1po and 30 and 55°C, respectively, for PHA from the I225L PhaC1po.
Construction of transformant E. coli by PCR mediated mutagenesis, site-specific saturation mutagenesis and in-vitro recombination
E. coli JM109 was used as a host strain for screening mutants of Pseudomonas sp. 61-3 PHA synthase (phaC1 ps ) and for P(3HB) accumulation. The plasmid vector, pGEM′′phaC1AB was constructed for the biosynthesis of P(3HB) in E. coli JM109 strain.
First the plasmid vector pGEM′phbCABRe carrying the Ralstonia eutropha P(3HB) operon with Csp 451 and Pst I digested its promoter and terminator region and the resulting 6.1 kb DNA fragment was ligated with a synthetic Cso 451-XbaI-EcoRI-BglII-PstI linker, which results in pGEM′′Abex vector. Then a plasmid was constructed for the random mutagenesis of the phaC1 ps gene by PCR-operated addition of restriction sites, NdeI and BamHI, within an initiation codon and downstream of a stop codon, respectively. The phaC1 ps gene (∼1.7 kb) was amplified by using pBSEX22 plasmid (Matsusaki et al. 2000) as a template with primers C1NdeI and C1BamHI. The PCR products was purified and digested with NdeI and BamHI, then subcloned into pET-23 a(+), resulting in pETphaC1ps plasmid. DNA sequencing confirms the DNA sequence of phaC1 ps gene region of pETphaC1ps. Finally XbaI and BamHI digestion of pETphaC1ps resulting in 1.7 kb fragment containing the phaC1 ps gene and the Shine-Dalgarao sequence of pET vector, was purified and ligated with XbaI and BglII digested pGEM′′Abex. The resulting plasmid, pGEM′′phaC1AB, was used for enhanced P(3HB) production and accumulation (Takase et al. 2003).
PCR-mediated mutagenesis showed an improvement in the function of PhaC1Ps in terms of its ability to produce poly(3-hydroxybutyrate) [P(3HB)] in recombinant E. coli. Mutants showed two times or more greater P(3HB) content than that (0.1 wt.%) within recombinant E. coli cells harboring the wild type phaC1Ps. Site-specific saturation mutagenesis showed 13- to 38- fold higher P(3HB) content in mutants as compared to the wild type. Whereas when in vitro recombination performed the P(3HB) contents of all the double mutants were greatly elevated, as much as 340- to 400-fold higher than in the wild type.
Conclusion
Recombinant PHA production will undoubtedly thrive on the enormous biological diversity of nature, where novel protein activities can be obtained from exotic places, while gene cloning becomes less and less of a technological hurdle. The optimization of fermentation systems for these recombinant organisms will also remain a challenge. Since PHAs are not natural products of E. coli, the responses by high cell density cultures to nutrient limitations that trigger subsequent feeds are unpredictable. New fermentation feeding strategies will therefore have to be developed.
This review attempts to bring together the genetic engineering and biochemical aspects of PHA. It is clear that at the end of the 3rd millennium, transgenic PHA producers will be an important source of green plastics and chemicals to the world. With the advent of further developments in metabolic engineering, such biotechnologies will be the rule rather than an exception. To discuss in great detail the vast number of microorganisms capable of producing PHAs would be beyond the scope of this review.
With all these advances it is likely that PHAs will become a major biodegradable plastic in a wide range of applications in the near future and will eliminate the disposable problem and environmental hazard, as are prevalent with conventional plastic material.
References
Anderson AJ, Dawes EA (1990) Occurrence, metabolism, metabolic role and industrial uses of bacterial polyhydroxyalkanoates. Microbiol Rev 54:450–472
Byrom D (1987) Polymer synthesis by microorganisms: technology and economics. Trends Biotechnol 5:246–250
Cevallos MA, Encarnacion S, Leija A, Mora Y, Mora J (1996) Genetic and physiological characterization of a Rhizobium etli mutant strain unable to synthesize poly (beta-hydroxybutyrate). J Bacteriol 178:1646–1654
Fukui T, Shiomi N, Doi Y (1998) Expression and characterization of (R)-specific enoyl-coenzyme a hydratase involved in polyhydroxyalkanoate biosynthesis by Aeromonas caviae. J Bacteriol 180:667–673
Fukui T, Kichise T, Iwata T, Doi Y (2001) Characterization of 13 kDa granule-associated protein in Aeromonas caviae and biosynthesis of polyhydroxyalkanoates with altered molar composition by recombinant bacteria. Biomacromolecules 2:148–153
Gerngross TU, Snell KD, Peoples OP, Sinskey AJ, Csuhai E, Masamune S, Stubbe J (1994) Overexpression and purification of the soluble polyhydroxyalkanoate synthase from Alcaligenes eutrophus: evidence for a required posttranslational modification for catalytic activity. Biochemistry 33:9311–9320
Ha CS, Cho WJ (2002) Miscibility, properties and biodegradability of microbial polyester containing blends. Prog Polym Sci 27:759–809
Hein S, Sohling B, Gottschalk G, Steinbuchel A (1997) Biosynthesis of poly (4-hydroxybutyric acid) by recombinant strains of Escherichia coli. FEMS Microbiol Lett 53:411–418
Huisman GW, Wonink E, Meima R, Kazemier B, Terpstra P, Witholt B (1991) Metabolism of poly (3-hydroxyalkanoates) (PHAs) by Pseudomonas oleovorans. Identification and sequences of genes and function of the encoded proteins in the synthesis and degradation of PHA. J Biol Chem 266:2191–2198
Huisman GW, Skraly F, Martin DP, Peoples OP (2006) Biological systems for manufacture of polyhydroxyalkanoates polymer containing 4-hydroxy acids. United State patent 6689589
Hustede E, Steinbuchel A (1993) Characterization of the polyhydroxyalkanoate synthase gene locus of Rhodobacter sphaeroides. Biotechnol Lett 15:709–714
Jung YM, Lee YH (1997) Investigation of regulatory mechanism of flux of acetyl-CoA in Alcaligenes eutrophus using PHB negative mutant and transformants harboring cloned phbCAB genes. J Microbiol Biotechnol 7:215–222
Khanna S, Srivastava AK (2005) Recent advances in microbial polyhydroxyalkanoates. Process Biochem 40:607–619
Kichise T, Taguchi S, Doi Y (2002) Enhanced Accumulation and Changed Monomer Composition in Polyhydroxyalkanoate (PHA) Copolyester by in vitro Evolution of Aeromonas caviae PHA Synthase. Appl Environ Microbiol 68:2411–2419
Lee SP, Do VM, Huisman GW, Peoples OP (1996) PHB polymerase from Zoogloea ramigera. GenBank accession no. U66242
Liebergesell M, Steinbuchel A (1992) Cloning and nucleotide sequences of genes relevant for biosynthesis of poly (3-hydroxybutyric acid) in Chromatium vinosum strain D. Eur J Biochem 209:135–150
Madison LL, Huisman GW (1999) Metabolic engineering of poly (3-Hydroxyalkanoates): from DNA to plastic. Microbiol Mol Biol Rev 63:21–53
Matsusaki H, Abe H, Taguchi K, Fukui T, Doi Y (2000) Biosynthesis of poly (3-hydroxybutyrate-co-3-hydroxyalkanoates) by recombinant bacteria expressing the PHA synthesis gene phaC1 from Pseudomonas sp. 61–3. Appl Microbial Biotechnol 53:401–409
Niamsiri N, Delamarre SC, Kim YR, Batt CA (2004) Engineering of chimeric class II Polyhydroxyalkanoate synthases. Appl Environ Microbiol 70:6789–6799
Park SJ, Lee SY (2003) Identification and characterization of a new enoyl Coenzyme A hydratase involved in biosynthesis of medium-chain-length polyhydroxyalkanoates in recombinant Escherichia coli. J Bacteriol 185:5391–5397
Peoples OP, Sinskey AJ (1989) Fine structural analysis of the Zoogloea ramigera phbA-phbB locus encoding beta-ketothiolase and acetoacetyl-CoA reductase: nucleotide sequence of phbB. Mol Microbiol 3:349–357
Povolo S, Casella S, Nuti MP (1996) Involvement of an orf in the synthesis and/or degradation of polyhydroxyalkanoate (PHA) in Rhizobium meliloti. In: Abstracts of the 1996 International Symposium on Bacterial Polyhydroxyalkanoates, Davos, Switzerland, p 4/01
Sandoval A, Arias-Barrau E, Bermejo F, Canedo L, Naharro G, Olivera ER, Luengo JM (2005) Production of 3-hydroxy-n-phenylalkanoic acids by a genetically engineered strain of Pseudomonas putida. Appl Microbiol Biotechnol 67:97–105
Steinbuchel A (1991) Polyhydroxyalkanoaic acids. In: Byrom D (eds) Biomaterials: novel materials from biological sources. Stockton Press, New York, NY, pp 124–213
Steinbuchel A, Hein S (2001) Biochemical and molecular basis of microbial synthesis of polyhydroxyalkanoates in microorganisms. Adv Biochem Eng Biotechnol 71:81–123
Steinbuchel A, Hustede E, Liebergesell M, Pieper U, Timm A, Valentin H (1992) Molecular basis for biosynthesis and accumulation of polyhydroxyalkanoic acids in bacteria. FEMS Microbiol Rev 103:217–230
Sudesh K, Abe H, Doi Y (2000) Synthesis, structure and properties of polyhydroxyalkanoates: biological polyesters. Prog Polym Sci 25:1503–1555
Takase K, Taguchi S, Doi Y (2003) Enhanced synthesis of poly (3-hydroxybutyrate) in recombinant Escherichia coli by means of error-prone pcr mutagenesis, saturation mutagenesis, and in vitro recombination of the type II polyhydroxyalkanoate synthase gene. J Biochem 133:139–145
Timm A, Byrom D, Steinbuchel A (1990) Formation of blends of various poly (3-hydroxyalkanoic acids) by a recombinant strain of Pseudomonas oleovorans. Appl Microbiol Biotechnol 33:296–301
Tombolini R, Povolo S, Buson A, Squartini A, Nuti MP (1995) Poly-beta-hydroxybutyrate (PHB) biosynthetic genes in Rhizobium meliloti. Microbiology 141:2553–2559
Umeda F, Kitano Y, Murakami Y, Yagi K, Miura Y, Mizoguchi T (1998) Cloning and sequence analysis of the poly (3-hydroxyalkanoic acid)-synthesis genes of Pseudomonas acidophila. Appl Biochem Biotechnol 70–72:341–352
Zhuang LB, Koon JJ, Brennan EM, Clouart JD, Horowitz DM, Gerngross TU, Huisman GW (1999) Reduction of cell lysate viscosity during processing of poly (3-hydroxyalkanoates) by chromosomal integration of the staphylococcal nuclease gene in Pseudomonas putida. Appl Environ Microbiol 65:1524–1529
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Naik, S., Venu Gopal, S.K. & Somal, P. Bioproduction of polyhydroxyalkanoates from bacteria: a metabolic approach. World J Microbiol Biotechnol 24, 2307–2314 (2008). https://doi.org/10.1007/s11274-008-9745-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11274-008-9745-z