In this work, the characteristics of surface morphology and structure of experimental samples of nickel-based alloy and copper nozzles manufactured by the electron beam additive method have been studied. It is found that the grain boundaries on the outer sample surface are oriented at different angles relative to the substrate due to uneven heat dissipation during printing. It is found that 3D printing in a non-optimal temperature regime produces a highly heterogeneous structure within the material layer. A curvilinear boundary zone is observed in which different structural phase components are formed, including solid solutions and mechanical mixtures.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
E. A. Kolubaev, V. E. Rubtsov, A. V. Chumaevsky, and E. G. Astafurova, Phys. Mesomech., 25, 479–491 (2022); https://doi.org/10.1134/S1029959922060017.
E. Akca and A. Gürsel, Period. Eng. Nat. Sci., 3, 15–27 (2015); https://doi.org/10.21533/PEN.V3I1.43.
M. Perrut, P. Caron, M. Thomas, and A. Couret, C. R. Phys., 19, 657–671 (2018); https://doi.org/10.1016/J.CRHY.2018.10.002.
F. Wang, D. Ma, and A. Bührig-Polaczek, Mater. Charact., 127, 311–316 (2017).
T. J. Horn and D. Gamzina, in: Additive Manufacturing Process, V. 24, D. L. Bourell, W. Frazier, H. Kuhn, and M. Seifi, eds., ASM International (2020), pp. 388–418; https://doi.org/10.31399/ASM.HB.V24.A0006579.
C. Zeng, H. Wen, B. C. Bernard, et al., Manuf. Lett., 28, 25–29 (2021); https://doi.org/10.1016/J.MFGLET.2021.02.002.
H. C. DeGroh, D. L. Ellis, and W. S. Loewenthal, J. Mater. Eng. Perform., 17, 594–606 (2008); https://doi.org/10.1007/S11665-007-9175-3.
S. Moriya, T. Inoue, M. Sasaki, et al., Trans. JPN Soc. Aeronaut. Space Sci., 16, 261–266 (2018); DOI:https://doi.org/10.2322/TASTJ.16.261.
A. A. Antonysamy, J. Meyer, and P. B. Prangnell, Mater. Charact., 84, 153–168 (2013); https://doi.org/10.1016/j.matchar.2013.07.012.
H. Zhao and T. Debroy, Metall. Mater. Trans. B, 32, 163–172 (2001); https://doi.org/10.1007/s11663-001-0018-6.
H. Inoue, T. Koseki, S. Ohkita, and M. Fuji, Sci. Technol. Weld. Join., 5, 385–396 (2000); https://doi.org/10.1179/136217100101538452.
J. Yin, L. L. Yang, X. Yang, et al., Addit. Manuf., 29, 200778 (2019); https://doi.org/10.1016/j.addma.2019.100778.
K. Puebla, L. E. Murr, S. M. Gaytan, et al., Mater. Sci. Appl., 3, 259–264 (2012); https://doi.org/10.4236/msa.2012.35038.
K. Kalashnikov, T. Kalashnikova, V. Semenchuk, et al., Metals, 12, 2048 (2022); https://doi.org/10.3390/met12122048.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kushnarev, Y.V., Semenchuk, V.M., Chumaevskii, A.V. et al. Production of Experimental Samples of Nickel-Based Alloy and Copper Nozzles by Electron Beam Additive Manufacturing. Russ Phys J 67, 419–426 (2024). https://doi.org/10.1007/s11182-024-03139-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-024-03139-8