The reliability of a steel-melting object operation depends to a considerable extent on the state of the furnace hearth refractory lining. Prolonged and partial furnace stoppages lead to loss of integrity of the sintered layer whose restoration requires performance of several necessary operations. Timely repair of the sintered layer reduces hot lost time and periclase material consumption.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. S. Dachygin, Open-Hearth Furnace Design [in Russian], Metallurgizdat, Moscow (1963).
V. A. Startsev, G. V. Voronov, V. I. Lobanov, et al., Scrap-Carburization Process in Steel Production in Open-Hearth Furnaces [in Russian], GOUVPO UGTU-VPO, Ekaterinburg (2004).
A. A. Karpov, V. A. Startsev, É. A. Shumakher, et al., “Openhearth furnace with a 270 ton capacity with a scrap-ore process and closed blowing of the bath with nitrogen through the hearth,” Vestnik. GOUVPO UGTU-VPO, 65, No. 13, 222 – 225 (2005).
V. A. Startsev and P. V. Umrikhin, “Metal reaction with an open-hearth furnace, Proc. IV Conf. on Physicochemical Bases of Steel Production, AN SSSR, Moscow (1960).
V. A. Startsev and P. V. Umrikhin, Izv. Vyssh. Uchebn. Zaved., Chernaya Metallurgiya, No. 9, 53 – 61 (1960).
Author information
Authors and Affiliations
Additional information
Translated from Novye Ogneupory, No. 6, pp. 7 – 10, June 2010.
Rights and permissions
About this article
Cite this article
Startsev, V.A., Voronov, G.V., Kaplun, L.I. et al. Open-hearth furnace steel melting bath refractory servicing. Refract Ind Ceram 51, 142–145 (2010). https://doi.org/10.1007/s11148-010-9278-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-010-9278-5