The current and residual deflections of sheet members during one- and two-layer build-up with three steels under different support conditions are analyzed. A mathematical model of the process is developed. It is based on the theory of built-up bodies, the unified model of viscoplastic flow, and continuous cooling transformation diagrams for microstructural transformations during cooling. The method of numerical modeling of the build-up process based on the finite-element approach is developed. A significant effect of microstructural transformations and support conditions on the residual deflection of surfaced sheet members is established. The correlation between the calculated and experimental data is satisfactory. The obtained results can be used to determine the parameters of the processes of surfacing sheet members.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
N. Kh. Arutyunyan, A. D. Drozdov, and V. E. Naumov, Mechanics of Growing Viscoelastoplastic Bodies [in Russian], Nauka, Moscow (1987).
N. I. Bezukhov, V. L. Bazhanov, I. I. Gol’denblat, N. A. Nikolaenko, and A. M. Sinyukov, Strength, Stability, and Vibration Analyses at High Temperatures [in Russian], Mashinostroenie, Moscow (1965).
A. S. Zubchenko (ed.), Database of Steels and Alloys [in Russian], 2nd edition, revised and expanded, Mashinostroenie, Moscow (2003).
V. I. Makhnenko, Safe Operation Life of Welded Joints and Components of Modern Structures [in Russian], Naukova Dumka, Kyiv (2006).
I. A. Motovilovets and V. I. Kozlov, Thermoelasticity, Vol. 1 of the six-volume series Mechanics of Coupled Fields in Structural Members [in Russian], Naukova Dumka, Kyiv (1987).
I. A. Ryabtsev and I. K. Senchenkov, Theory and Practice of Surfacing Operations [in Russian], Ekotekhnologiya, Kyiv (2013).
I. A. Ryabtsev, I. K. Senchenkov, and E. V. Turyk, Surfacing: Materials, Technologies, Mathematical Simulation [in Russian], Izd. Silezsk. Politekhn. Inst., Gilwice (2015).
I. K. Senchenkov, L. M. Lobanov, O. P. Chervinko, and N. A. Pashchin, “Patterns of relative longitudinal displacements of plates during butt electric welding,” Dop. NAN Ukrainy, No. 6, 66–70 (1998).
I. K. Senchenkov, I. A. Ryabtsev, E. Turyk, and G. A. Tabieva, “Calculation of residual stresses in multilayer spiral surfacing of cylindrical parts based on the theory of build-up of viscous plastic bodies,” Svaroch. Proizv., No. 9, 18–25 (2005).
A. A. Popov and A. E. Popova, Isothermal and Continuous Cooling Transformation Diagrams of Supercooled Austenite. Heat-Treater Reference Book [in Russian], GNTI Mashlit, Moscow–Sverdlovsk (1961).
M. Kh. Shorshorov and V. V. Belov, Phase Transformations and Changes in Steel Properties During Welding. Atlas [in Russian], Nauka, Moscow (1972).
S. F. Yur’ev, Specific Volumes of Phases in the Martensitic Transformation of Aaustenite [in Russian], Metallugizdat, Moscow (1950).
S. R. Bodner, Unified Plasticity – an Engineering Approach, Final Rep. Technion, Israel Inst. Of Tech., Haifa (2000).
L. Börjesson and L. E. Lindgren, “Simulation of multipass welding with simultaneous computation of material properties,” ASME, J. Eng. Mater. Tech., No. 123, 106–111 (2001).
N. W. Klingbeil, J. L. Beuth, R. K. Chin, and C. H. Amon, “Residual stress-induced warping in direct metal solid freeform fabrication,” Int. J. Mech. Sci., 44, No. 1, 57–77 (2002).
D. Koistinen and R. Marburger, “A general equation prescribing the extent of the austenite-martensite transformation in pure-carbon alloys and plain carbon steels,” Acta Metallica, No. 7, 59–60 (1959).
L. E. Lindgren, Computational Welding Mechanics – Thermomechanical and Microstructural Simulations, CRC Press, Cambridge (2007).
D. Radaj, Welding Residual Stresses and Distortion. Calculation and Measurement, DVs Verlag GmbH, Dusseldorf (2003).
I. K. Senchenkov, “Thermomechanical model of growing cylindrical bodies made of physically nonlinear materials,” Int. Appl. Mech., 41, No. 9, 1059–1065 (2005).
A. Y. Shevchenko, M. V. Banyas, and I. K. Senchenkov, “A variant of the equations of nonisothermal plastic flow,” Int. Appl. Mech., 48, No. 5, 602–607 (2012).
I. K. Senchenkov, O. P. Chervinko, M. V. Banyas, “Modelling of thermomechanical process in growing viscoplastic bodies with accounting of microstructural transformations,” in: F. Hetnarski (ed.), Encyclopedia of Thermal Stresses, Springer Sci-Disness Media Pordrecht, No. 6, pp. 3147–3157.
I. K. Senchenkov and N. D. Oksenchuk, “Modeling of a nonisothermal flow with regard for the dependence of plastic properties on the microstructure of a material,” J. Math. Sci., 190, No. 6, 796–803 (2013).
I. K. Senchenkov and G. A. Tabieva, “Determination of the parameters of the bodner-partom model for thermoplastic deformation of materials,” Int. Appl. Mech., 32, No. 2, 132–139 (1996).
I. K. Senchenkov, G. A. Tabieva, I. A. Ryabtsev, and E. Turyk, “Calculation of residual stresses in multilayer helical surfacing of cylindrical components on the base of the theory of growth of viscoplastic solids,” Weld. Int., 20, No. 2, 150–156 (2006).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated from Prykladna Mekhanika, Vol. 58, No. 5, pp. 97–108, September–October 2022.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Senchenkov, I.K., Ryabtsev, I.O., Chervinko, O.P. et al. Calculation of Deflections during Build-Up of Sheet Members with Liquid Metal. Int Appl Mech 58, 583–593 (2022). https://doi.org/10.1007/s10778-023-01182-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-023-01182-5