An effective approach to the simulation of crack-type fracture is developed based on the semi-analytical finite element method. Algorithms for determining the parameters of fracture strength for elastic bodies of revolution and prismatic bodies under non-stationary force loading of different intensity and duration are proposed. The energy approach based on the application of a special prismatic and ring finite elements with crack under dynamic loading are used to calculate the fracture parameters. The efficiency of the algorithms is estimated.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. N. Atluri, Computational Methods in the Mechanics of Fracture, Elsevier Science Publishers, Amsterdam (1986).
V. A. Bazhenov, O. I. Gulyar, S. O. Piskunov, O. S. Sakharov, and O. O. Shkril, “The force method for evaluation of J-integral in spatial nonlinear problems of fracture mechanics,” Sopr. Mater. Teor. Sooruzh., 79, 3–17 (2006).
V. A. Bazhenov, A. I. Gulyar, A. S. Sakharov, and A. G. Topor, Semianalytic Finite Element Method in Solid Mechanics [in Russian], Vipol, Kiev (1993).
K. J. Bathe and E. L. Wilson, Numerical Methods in Finite Element Analysis, Prentice Hall, Englewood Cliffs, N. J. (1976).
V. I. Blokh, Theory of Elasticity [in Russian], Izdat. Kharkov Univ., Kharkov (1964).
O. S. Zienkiewicz, The Finite Element Method in Engineering Science, McGraw-Hill, London (1972).
A. B. Zolotov, Discrete-Continuous Finite Element Method. Civil Engineering Applications [in Russian], ACB, Moscow (2010).
B. Ya. Kantor and V. I. Gnitko, “On a method for the analysis of the strain state of thin-wall structures of revolution that are cyclically inhomogeneous along the circumference,” IPMash AN USSR, Kharkov, preprint 171 (1982).
E. M. Morozov and G. P. Nikishkov, Finite Element Method in Fracture Mechanics [in Russian], Nauka, Moscow (2007).
A. N. Guz (ed.), Nonclassical Problems of Fracture Mechanics [in Russian], four volume series, Naukova Dumka, Kiev (1993).
M. P. Savruk, Fracture Mechanics and Strength of Materials. Handbook. Vol. 2, Stress Intensity Factors in Solids with Cracks, Naukova Dumka, Kiev (1988).
I. I. Solodei, “Efficiency of SAFEM finite element basis for approximation of bodies of revolution and prismatic bodies in dynamic problems,” Sopr. Mater. Teor. Sooruzh., 82, 154–163 (2008).
G. P. Cherepanov, Mechanics of Brittle Fracture, McGraw-Hill, New York (1979).
A. A. Kotlyarenko, T. A. Prach, V. V. Kharchenko, and A. Yu. Chirkov, “Numerical simulation of stress–strain state near crack tip in a compact tensile specimen,” Strength of Materials, 41, No. 1, 106–112 (2009).
V. L. Bogdanov, A. N. Guz, and V. M. Nazarenko, “Spatial problems of the fracture of materials loaded along cracks (review),” Int. Appl. Mech., 51, No. 5, 3–89 (2015).
J. Rice, “A path independent integral and the approximate analysis of strain concentrations by notches and cracks,” J. Appl. Mech., 35, No. 2, 379–386 (1968).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 54, No. 5, pp. 35–46, September–October, 2018.
Rights and permissions
About this article
Cite this article
Bazhenov, V.A., Vabishchevich, M.O., Solodei, I.I. et al. Semianalytic Finite-Element Method in Dynamic Problems of Linear Fracture Mechanics. Int Appl Mech 54, 519–530 (2018). https://doi.org/10.1007/s10778-018-0904-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-018-0904-0