Abstract
The natural vibrations of anisotropic rectangular plates of varying thickness with complex boundary conditions are studied using the spline-collocation and discrete-orthogonalization methods. The basic principles of the approach are outlined. The natural vibrations of orthotropic plates with parabolically varying thickness are calculated. The results (natural frequencies and modes) obtained with different boundary conditions are analyzed
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
REFERENCES
A. Ya. Grigorenko, “Spline-collocation analysis of the natural vibrations of rectangular plates with varying thickness,” Prikl. Mekh., 26, No.12, 116–119 (1990).
Ya. M. Grigorenko, E. I. Bespalova, A. B. Kitaigorodskii, and A. I. Shinkar', Natural Vibrations of Members in Shell Structures [in Russian], Naukova Dumka, Kiev (1986).
L. V. Kurpa and A. V. Chistilina, “Studying the natural vibrations of laminated shallow shells and plates with a complex planform,” Probl. Prochn., No. 2, 112–123 (2003).
S. G. Lekhnitskii, Anisotropic Plates [in Russian], Gostekhizdat, Moscow (1957).
P. M. Varvak and A. F. Ryabov (eds.), Elasticity Theory Handbook [in Russian], Budivel'nyk, Kiev (1971).
F. C. Appl and N. R. Bayers, “Fundamental frequency of simply supported rectangular plates with linearly varying thickness,” Trans. ASME, Ser. E. J. Mech., 32, 163–168 (1965).
A. N. Bercin, “Free vibration solution for clamped orthotropic plates using the Kantorovich method, ” J. Sound Vibr., 196, No.2, 243–247 (1996).
R. B. Bnat, P. A. A. Laura, R. Gutierrez, V. N. Cortinez, and S. Sanzi, “Numerical experiments on the determination of natural frequencies of transverse vibrations of rectangular plates of non-uniform thickness,” J. Sound Vibr., 138, No.2, 205–219 (1990).
R. B. Bnat, “Natural frequencies of rectangular plates using characteristic orthogonal polynomials in Rayleigh-Ritz method,” J. Sound Vibr., 102, No.4, 493–499 (1985).
R. B. Bnat, “Flexural vibration of polygonal plates using characteristic orthogonal polynomials in two variables,” J. Sound Vibr., 114, No.1, 65–71 (1987).
S. K. Chaudhuri, “Large amplitude free vibration of square plate of variable thickness,” J. Sound Vibr., 72, No.3, 143–147 (1984).
S. S. H. Chen, “Bending and vibration of plates of variable thickness,” Trans. ASME, Ser. B. J. Eng. for Industry, 98, No.1, 16–170 (Feb. 1976), 157–158 (1977).
K. F. Graff, Wave Motion in Elastic Solids, Dover, New York (1991).
D. J. Gorman, “Accurate free vibration analysis of clamped orthotropic plates by the method of superposition,” J. Sound Vibr., 140, No.3, 391–411 (1990).
A. Ya. Grigorenko and T. V. Tregubenko, “Numerical and experimental analysis of natural vibration of rectangular plates with variable thickness,” Int. Appl. Mech., 36, No.2, 268–270 (2000).
Ya. M. Grigorenko and S. N. Yaremchenko, “Stress analysis of orthotropic noncircular cylindrical shells of variable thickness in a refined formulation,” Int. Appl. Mech., 40, No.3, 266–274 (2004).
Ya. M. Grigorenko and L. I. Zakhariichenko, “Studying the effect of the spatial frequency and amplitude of corrugation on the stress-strain state of cylindrical shells,” Int. Appl. Mech., 39, No.12, 1429–1435 (2003).
Ya. M. Grigorenko and L. I. Zakhariichenko, “Stress-strain analysis of elliptic cylindrical shells under local loads,” Int. Appl. Mech., 40, No.10, 1157–1163 (2004).
S. F. Nog and Y. Araar, “Free vibration and buckling analysis of clamped rectangular plates of variable thickness by the Galerkin method,” J. Sound Vibr., 135, No.2, 263–274 (1989).
R. L. Ramkumar, P. C. Chen, and W. J. Sanders, “Free vibration solution for clamped orthotropic plates using Lagrangian multiplier technique,” Amer. Inst. Aeronaut. Astronaut. J., 25, 146–151 (1987).
T. Sakata and K. Hosokawa, “Vibrations of clamped orthotropic rectangular plates,” J. Sound Vibr., 125, No.4, 429–439 (1988).
J. S. Tomar, D. C. Gupta, and N. C. Jain, “Vibration of nonhomogeneous plates of variable thickness, ” J. Acous. Soc. Amer., 72, No.3, 851–855 (1982).
S. D. Yu. and W. L. Cleghorn, “Generic free vibration of orthotropic rectangular plates with clamped and simply supported edges,” J. Sound Vibr., 163, No.4, 439–450 (1993).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika, Vol. 41, No. 10, pp. 90–99, October 2005.
Rights and permissions
About this article
Cite this article
Grigorenko, A.Y., Efimova, T.L. Spline-Approximation Method Applied to Solve Natural-Vibration Problems for Rectangular Plates of Varying Thickness. Int Appl Mech 41, 1161–1169 (2005). https://doi.org/10.1007/s10778-006-0022-2
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10778-006-0022-2