The technological and constructive measures implemented on the boiler E-135-3,2-420 DG are provided, which allow reducing the formation of nitrous oxides during combustion of the gaseous oil shale processing products. By reducing the volumetric heat release rate of the furnace, employing special burners, arranging for a staged combustion and recirculating flue gases, it became possible to ensure stable fuel burning throughout the entire operating range of the boiler with a nitrous oxide concentration in flue gases of less than 100 mg/m3 (at O2 = 3%). Incomplete combustion was practically eliminated.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
A. N. Tugov, A. Ots, A. Siirde, V. T. Sidorkin, and G. A. Ryabov, “Development of measures for improving the technologies of energy recovery from gaseous waste of shale processing,” Teploénergetika, No. 6, 53 – 62 (2016).
V. T. Sidorkin, A. N. Tugov, V. M. Supranov, et al., “Experience of re-engineering BKZ-75-39 FSl boilers for combustion of shale processing products,” Énergetik, No. 2, 68 – 70 (2014).
Industry Standard OST 108.836.05-82. Oil_Gas Burners and Stationary Steam Boiler Embrasures. Types, Key Parameters and Technical Requirements. Design and Sizes. Methods of Calculation and Design [in Russian], effective date: July 1, 1983.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Élektricheskie Stantsii, No. 5, May 2018, pp. 46 – 49.
Rights and permissions
About this article
Cite this article
Tugov, A.N., Vereshchetin, V.A., Sidorkin, V.T. et al. Reduction of Nitrous Oxide Emissions of the Boiler E-135-3,2-420 DG During Combustion of the Gaseous Oil Shale Processing Products. Power Technol Eng 52, 444–447 (2018). https://doi.org/10.1007/s10749-018-0972-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10749-018-0972-7