Abstract
Detailed geologic mapping provides valuable informations about the spatial distribution of lithological outcrops and lineaments; required to carry out the necessary investigations of the geologic, geotechnical and hydrogeological data investigation. The unavailability of geologic coverage at meduim scale in the Nementcha mountains has severely hampered geoscientist to develop and test their hypotheses. In order to exploit multispectral datasets for the characterization of surface materials; Sentinel-2A data was used in the discrimination of geological classes along Youks les Bain area, extreme NE of Algeria. Resampling, orthorectification, atmospheric correction, and radiometric normalization have been applied to the Sentinel-2A radiance data, identified as the first and most important step in processing. The 12/4, 11/3 and 8/4 band ratios combination was adopted to discriminate the different lithologies. Then, to reduce redundant information in highly correlated bands, the principal component analysis has been implemented. The directional filters were applied to undertaken the lineamentary mapping. At last the project was exported and processed in GIS spatial database. The result allows the discrimination of the lithological boundaries and help to a better understanding of the local geology of the study area. The project digital databases represents a key tool to support research activities in the West of Tebessa region.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
Geographic Information System (GIS) and Remote sensing (RS) play a relevant role in geoenvironmental issues such as, geology (Hadji et al. 2014a; Abdelouahad et al. 2018), water (Hamed et al. 2014; Mokadem et al. 2016), agriculture (Kingra et al. 2016; Hamed et al. 2017a, b; Besser et al. 2018), infrastructure planning (Achour et al. 2017; Dahoua et al. 2017a, b), Mining environment (Zahri et al. 2016; Raïs et al. 2017), natural hazards mitigation (Hadji et al. 2014b; Mouici et al. 2017), and disaster management (Hadji et al. 2017a, b; Dahoua et al. 2017b). Recently satellite imagery, GIS and RS has grown as a relevant hi-tech tools for monitoring and collecting information on almost every aspect on the Earth’s surface (Hadji et al. 2017b; Karim et al. 2019; Mahdadi et al. 2018). Recent increases in the availability of earth observation data and the advances made in its processing have opened up new opportunities for earth monitoring studies (Ngcofe and Van Niekerk 2016). RS applications have opened a new era in the identification of rock types and tectonic styles mainly in arid zones with minimal vegetation and culture (Hadji et al. 2013; Hassani et al. 2015; Bersi et al. 2016; Adiri et al. 2017; El Kati et al. 2018). In practice, qualitative and quantitative approaches are the most successfully used techniques to discriminate geological outcrops for a given study area (Van der Meer et al. 2012; Ge et al. 2018). Qualitative approaches depends on stereoscopic examination of monoscopic satellite images by applying a synthetic parallax (Bilotti et al. 2000). Whereas quantitative methods measures the relative distinctiveness of the reflectance spectra of individual lithological classes; wich depends on their minerals composition (Banerjee and Mitra 2004). The reflectance of outcrops are widely controlled by the physical–chemical properties of the rock and soil surfaces. This matter was explicitly addressed by Leverington and Moon (2012).
In the present paper, an attempt has been tested to analyze the capability of the remote sensing and GIS applications for the characterization of geological features in Youks les Bains region, West of Tebessa province. This region and its surroundings lacks a geological mapping/information, which hinders geologists who study geological structures, lithology discrimination, geohazard identification and mitigation, geomorphology and landform processes, and mineral exploration, (Zerrouki et al. 2013; Hadji et al. 2016; Hamed et al. 2017a), (Fig. 1). We preferred to use Sentinel-2A data than common multispectral data, due to its higher spectral and spatial resolutions in the VNIR and SWIR region. The methodology applied in this research offer the opportunity to analyse surface geology in a relatively short time and at reduced cost; and give an overall view of a study area often difficult to obtain from field-based observation alone (Simon et al. 2016).
2 Study Area
The study area used in this remote sensing assessment encompasses the 1/50,000 Youks les bain topographic map area (WGS84: 7°37′45″ to 7°58′10″ E and 35°19′45″ to 35°31′32″ N), and covers approximately 639.684 km2. The topography is marked by incisions of Oued Chabro in the quaternary cover. The latter bring out Jebel Troubia and Tazbent Eo-miocene and upper Cretaceous formations (Guadri et al. 2015). The study area is located in the East of Algeria, about 50 km West of Tebessa city, (Fig. 2). It belongs to the Saharan Atlas chain composed of Meso-Cenozoic lands folded mainly in the Eocene. The encountered series are entirely sedimentary from Turonian to Ypresian-Lutetian stage. All covered in large part by Quaternary deposits, especially in plains (Fig. 3). Maastrichtian limestones constitute an important aquifer through which manifest springs of fresh water (Rouabhia et al. 2012). The limestone ridge separating the Chott Melghir and Medjerda major catchments with opposite flow, (Demdoum et al. 2015; Hamed et al. 2018).
The principal structure of the region is Gourigueur syncline, wich constitutes the oriental continuity of Babar-Chachar syncline, extendes over more than 90 km from Khenguet Sidi Nadji in the SW to Jebel Serdiès in the NE. This megastructure was setup by the Atlasic phase with maximum stress around 150°E (Kowalski and Hamimed 2002).
The climate is typically semi-arid with an average rainfall of 370 mm per year. The monthly precipitation distribution shows two distinct major seasons: a dry and warm season alternated by a wet and cold season. Spring is the rainiest season, while summer is the driest (Hamad et al. 2018a, b).
3 Materials and Methods
Aiming to evaluate the capability of Sentinel-2A to map geological units. This paper provides a working approach for the discrimination of lithological formations and lineaments inside the “Youks les bains” Topographic map (205) framework. The methodology is based on remotely sensed imagery, GIS as well as a field work and the correlation with the neighbouring geologic maps. The used data consists of a Sentinel-2A scene acquired from USGS website (https://glovis.usgs.gov/), on February 2017, with a Universal Transverse Mercator (UTM) projection and a World Geodetic System WGS 84 datum, one Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM) with 30 m spatial resolution, and two geological maps in 1/50,000 scale, namely Dalâa (204) and Meskiana (177). Sentinel-2A imagery covers 13 spectral bands in the VNIR and SWIR spectral region, with four bands at 10 m, six bands at 20 m and three bands at 60 m spatial resolution (Table 1).
The Sentinel-2A imagery used in this study data were automatically atmospheric corrected and orthorectified using the SNAP software. Due to the design for atmospheric correction, spectral bands 1, 9 and 10 of Sentinel-2A data with 60 m spatial resolution were removed in the following study. The remained 10 bands were layer stacked to one file and cubically resampled to 10 m spatial resolution. The satellite image was processed using Envi 5.2 software, in order to bring out the contours of geological formations. Different applications allowed us to extract thematic maps; such as PCA and directional filters. All the derived themes from the analysis have been exported in “12-bit GeoTIFF” image enabling the image to be acquired over a range of 0–4095 potential light intensity values, then implemented in a Geodatabase in GIS platform using Arcgis 10.5 software. The morphostructural indicators have been divided in “linear remote structures” and “areal remote structures”, referring to brittle geologic structures (faults, fractures, lineaments, joints, etc.) and areal-defined geologic structures (folds, thrust sheets, hörst and graben, etc.), respectively. The work was completed by a correlation with the neighbouring geological maps (Dalâa N°204 and Meskiana N°177) (Fig. 4) and by an extensive field surveys. The adopted method is simply explained in the flow diagram in Fig. 5.
4 Data Processing
4.1 The Spectral Enhancement
The Sentinel-2 imagery used in this study data were automatically atmospheric corrected and orthorectified. Among bands featured in Sentinel-2A image, 4, 3 and 2 bands were assigned to the red, green and blue (RGB) channels giving a natural color. This combination highlighted the edges of geological formations, drainage and anomalies.
4.2 Ratios Bands Analysis
Different ratio combinations obtained from past researchers and that was produced from this study were tested on the image of the hammamet region to identify the best ratio combinations that were able to discriminate the different lithologies. A total of 20 combinations were performed to examine which combinations are the most effective. From all the combination, 12/4 11/3 and 8/4 ratios was identified as the most suitable; in the RGB sequence. These combinations enhanced the spectral differences of each lithology unit so that it can be distinguished easily. Apart from the difference in the spectral response, the texture of the lithologies was also enhanced to assist in discriminating the different units.
4.3 Principal Component Analysis
The PCA is an effective technical to accentuate a multispectral image for geological interpretation. It consists on the transformation of interrelated variables into new uncorrelated variables, based on the covariance analysis of the data correlation matrix (Lamri 2017). These new variables are called “main components”. It reduces the information contained in several bands, sometimes highly correlated into a smaller number of components (Aouragh et al. 2012). Statistically, the first components produced best explanation of the data variability (Gasmi et al. 2016). For the variable K, it is noted:
The PCA allowed us to identify different color ranges. The Maastrichtian limestone bar was discriminated by the blue fringe in the PCA image (Fig. 6a, b). The lithological formations outcroping in the study area were determined in accordance with our own field observations (Fig. 7).
4.4 Directional Filters Application
The directional filters are used strictly for the structural analysis. This technique improves the perception of lineaments; causing an optical effect of shade worn on the image as if it were illuminated by light grazing (Hammad et al. 2016). It can enhance lineaments that are not favoured by the illumination source. In our case the use of the Band8-NIR (0.842 μm, 10 m) image enlighten several structural details. The convolutions filters according to three directions: 0°, 90°, and 135° allows to identify lineaments corresponding to lithological or structural discontinuities (Fig. 8). As an alternative procedure, the automatic lineaments extraction can be applied based on, the use of a filter for the detection of contours. This can identify areas with unexpected changes in the values of nearest pixels, wich indicating lineaments (Hashim et al. 2013).
5 Results and Discussions
The results allowed the discrimination of the structures boundaries of the outcropping formations in the study area. The lithology indexes applied to Sentinel-2A multispectral images, give us a fast detection of the land surface saved as an 12-bit GeoTIFF raster image. Which can be imported to a GIS environment from which a simple vectorization area and perimeter are easily obtained. The geographical extension of the outcropping features is obtained. The lithologic map was thereby obtained from the compilation of the different facies of the study area with the image processing, completed by our own field observations (Fig. 9). The stratigraphic limits were determined by correlating the satellite images of the region with the adjacent geological maps. The Campanian limestones (59.02 km2) and Maastrichtian limestones and marls (56.28 km2) constitute the most representative formations.
A direct extraction of lineaments was performed to identify all structures and linear areas using directional filters. For the expression of ridge lines, boundaries between geological formations, and shear corridors, the N0°, N90°, and N135° filters were applied to Sentinel-2A bands using Cetin and Kavak (2007) approach. The filter N45° was not considered because of its poor quality. A synthesis map of the lineaments with more than 41 feature of varying sizes representing all the segments is obtained by the overlap of the information contained in all the filtered images. It indicates two important families of lineament orientations: primary NE-SW and secondary NW–SE. The displacement directions of these shears were determined with a field work.
For the completion of the geological map of the study area (Fig. 10), the lineaments map obtened from directional filters application was overlaid to the lithologic map.
The most important structures of the region are concentrated in Guerigueur, Serdies, Es Stah, Gaâgâ and Troubia mountains in the western part of the study framwork. These structures are essentially developed in anticlines and synclines, they often meet where they take a wavy appearance. The cores of some pleats consist of Maastrichtian limestones, others of Palaeogene deposits. The formation of the pleated structures was accompanied by many disjunctive accidents, divided into two families oriented in SE and NW directions.
With the PCA, many facies are distinguishable within the study Area. The Turonian limestones; the Maastrichtian limestones and marls; the Danian marls and limestones; the Montian marls; the Thanetian phosphates; the Ypresian limestones and flint marl; the Lutetian marls with gypsum; the Miocene Sandstone-clayey sediments and the Quaternary deposits were identified and delineated.
6 Conclusion
The study allowed us to test the efficiency of specific processing applied to Sentinel-2A images (spectral heightening, band rationing and PCA analysis) in the Youks les Bains region (NE Algeria). The structures boundaries of the outcropping formations were confronted to the published (Dalâa and Meskiana) geological maps as well as to the field observations in order to perform a lithological discrimination along the study framwork. As the most efficient image processing result, we were able to recognize a lithological diversity with different facies: the Turonian limestones; the Maastrichtian limestones and marls; the Danian marls and limestones; the Montian marls; the Thanetian phosphates; the Ypresian limestones and flint marl; the Lutetian marls with gypsum; the Miocene Sandstone-clayey sediments and the Quaternary formations. This study gives information for identifying some lithological units corresponding to superficial formations previously undetermined.
The structural study used directional filters, to define more than 41 lineaments mostly regrouped into two groups NW–SE and NE–SW. The use of Sentinel-2A for gelogical descrimination gives good results for geological mapping in particular when it is combining field data.
References
Abdelouahad M, Hadji R, Fehdi C (2018) Use of slope failures inventory and climatic data for landslide susceptibility, vulnerability, and risk mapping in souk Ahras region. Min Sci 24:235–237. https://doi.org/10.5277/msc172417
Achour Y, Boumezbeur A, Hadji R et al (2017) Landslide susceptibility mapping using analytic hierarchy process and information value methods along a highway road section in Constantine, Algeria. Arab J Geosci 10:194
Adiri Z, El Harti A, Jellouli A, Lhissou R, Maacha L, Azmi M, Bachaoui EM (2017) Comparison of Landsat-8, ASTER and Sentinel 1 satellite remote sensing data in automatic lineaments extraction: A case study of Sidi Flah-Bouskour inlier, Moroccan Anti Atlas. Adv Space Res 60(11):2355–2367
Aouragh H, Essahlaoui A, Ouali A, Hmaidi AE, Kamel S (2012) Lineaments frequencies from Landsat ETM+ of the Middle Atlas Plateau (Morocco). Res J Earth Sci 4(1):23–29
Banerjee S, Mitra S (2004) Remote surface mapping using orthophotos and geologic maps draped over digital elevation models: application to the Sheep Mountain anticline, Wyoming. AAPG Bull 88(9):1227–1237
Bersi M, Saibi H, Chabou MC (2016) Aerogravity and remote sensing observations of an iron deposit in Gara Djebilet, southwestern Algeria. J Afr Earth Sc 116:134–150
Besser H, Mokadem N, Redhaounia B, Hadji R, Hamad A, Hamed Y (2018) Groundwater mixing and geochemical assessment of low-enthalpy resources in the geothermal field of southwestern Tunisia. Euro-Mediterr J Environ Integr 3(1):16
Bilotti F, Shaw JH, Brennan PA (2000) Quantitative structural analysis with stereoscopic remote sensing imagery. AAPG Bull 84(6):727–740
Cetin KK, Kavak KS (2007) A detailed geologie lineament analysis using landsat TM data of Gölmarmara/Manisa Region, Turkey. Online J Earth Sci 1(3):145–153
Dahoua L, Savenko VY, Hadji R (2017a) GIS-based technic for roadside-slope stability assessment: an bivariate approach for A1 East-west highway, North Algeria. Min Sci 24:81–91
Dahoua L, Yakovitch SV, Hadji R, Farid Z (2017b) Landslide susceptibility mapping using analytic hierarchy process method in BBA-Bouira Region, case study of East-West Highway, NE Algeria. In: Kallel A, Ksibi M, Ben Dhia H, Khélifi N (eds) Recent advances in environmental science from the euro-mediterranean and surrounding regions. EMCEI 2017. Advances in Science, Technology & Innovation (IEREK Interdisciplinary Series for Sustainable Development). Springer, Cham
Demdoum A, Hamed Y, Feki M, Hadji R, Djebbar M (2015) Multi-tracer investigation of groundwater in El Eulma Basin (Northwestern Algeria), North Africa. Arab J Geosci 8(5):3321–3333
El Kati I, Nakhcha C, El Bakhchouch O, Tabyaoui H (2018) Application of Aster and Sentinel-2A Images for geological mapping in arid regions: the Safsafate Area in the Neogen Guercif basin, Northern Morocco. Int J Adv Remote Sens GIS 7(1):2782–2792
Gasmi A, Gomez C, Zouari H, Masse A, Ducrot D (2016) PCA and SVM as geo-computational methods for geological mapping in the southern of Tunisia, using ASTER remote sensing data set. Arab J Geosci 9(20):753
Ge W, Cheng Q, Jing L, Armenakis C, Ding H (2018) Lithological discrimination using ASTER and Sentinel-2A in the Shibanjing ophiolite complex of Beishan orogenic in Inner Mongolia, China. Adv Space Res 62(7):1702–1716
Guadri L, Hadji R, Zahri F, Raïs K (2015) The quarries edges stability in opencast mines: a case study of the Jebel Onk phosphate mine, NE Algeria. Arab J Geosci 8:8987–8997
Hadji R, errahmane Boumazbeur A, Limani Y, Baghem M, el Madjid Chouabi A, Demdoum A (2013) Geologic, topographic and climatic controls in landslide hazard assessment using GIS modeling: a case study of Souk Ahras region, NE Algeria. Quat Int 302:224–237
Hadji R, Limani Y, Boumazbeur A, DemdoumA Zighmi K, Zahri F, Chouabi A (2014a) Climate change and their influence on shrinkage—swelling clays susceptibility in a semi—arid zone: a case study of Souk Ahras municipality, NE-Algeria. Desalin Water Treat 52(10–12):2057–2072
Hadji R, Limani Y, Demdoum A (2014b) Using multivariate approach and GIS applications to predict slope instability hazard case study of Machrouha municipality, NE Algeria. https://doi.org/10.1109/ict-dm.2014.6917787 Publisher: IEEE Xplore. Print ISBN: 978-1-4799-4768-3, Accession Number: 14651190
Hadji R, Chouabi A, Gadri L, Raïs K, Hamed Y, Boumazbeur A (2016) Application of linear indexing model and GIS techniques for the slope movement susceptibility modeling in Bousselam upstream basin, Northeast Algeria. Arab J Geosci 9:192
Hadji R, Raïs K, Gadri L, Chouabi A, Hamed Y (2017a) Slope failures characteristics and slope movement susceptibility assessment using GIS in a medium scale: a case study from Ouled Driss and Machroha municipalities, Northeastern of Algeria. Arab J Sci Eng 42:281–300
Hadji R, Achour Y, Hamed Y (2017b) Using GIS and RS for slope movement susceptibility mapping: comparing AHP, LI and LR methods for the Oued Mellah Basin, NE Algeria. In: Kallel A, Ksibi M, Ben Dhia H, Khélifi N (eds) Recent advances in environmental science from the euro-mediterranean and surrounding regions. EMCEI 2017. Advances in Science, Technology & Innovation (IEREK Interdisciplinary Series for Sustainable Development). Springer, Cham
Hamad A, Baali F, Hadji R, Zerrouki H, Besser H, Mokadem N, Hamed Y (2018a) Hydrogeochemical characterization of water mineralization in Tebessa-Kasserine karst system (Tuniso-Algerian Transboundry basin). Euro-Mediterr J Environ Integr 3(1):7
Hamad A, Hadji R, Bâali F, Houda B, Redhaounia B, Zighmi K, Hamed Y (2018b) Conceptual model for karstic aquifers by combined analysis of GIS, chemical, thermal, and isotopic tools in Tuniso-Algerian transboundary basin. Arab J Geosci 11(15):409
Hamed Y, Ahmadi R, Hadji R, Mokadem N, Ben Dhia H, Ali W (2014) Groundwater evolution of the Continental Intercalaire aquifer of Southern Tunisia and a part of Southern Algeria: use of geochemical and isotopic indicators. Desalin Water Treat 52(10–12):1990–1996
Hamed Y, Redhaounia B, Sâad AB, Hadji R, Zahri F, El Hidouri B (2017a) Groundwater Inrush Caused by the fault reactivation and the climate impact in the mining Gafsa Basin (Southwestern Tunisia). J Tethys 5(2):154–164
Hamed Y, Redhaounia B, Ben Sâad A, Hadji R, Zahri F, Zighmi K (2017b) Hydrothermal waters from karst aquifer: case study of the Trozza basin (Central Tunisia). J Tethys 5(1):33–44
Hamed Y, Hadji R, Redhaounia B, Zighmi K, Bâali F, El Gayar A (2018) Climate impact on surface and groundwater in North Africa: a global synthesis of findings and recommendations. Euro-Mediterr J Environ Integr 3(1):25
Hammad N, Djidel M, Maabedi N (2016) Cartographie des linéaments géologiques en domaine aride par extraction semi-automatique à partir d’images satellitaires: exemple à la région d’El Kseïbat (Sahara algérien). Estud Geol 72(1):049
Hashim M, Ahmad S, Johari MAM, Pour AB (2013) Automatic lineament extraction in a heavily vegetated region using Landsat Enhanced Thematic Mapper (ETM +) imagery. Adv Space Res 51(5):874–890
Hassani M, Chabou MC, Hamoudi M, Guettouche MS (2015) Index of extraction of water surfaces from Landsat 7 ETM+ images. Arab J Geosci 8(6):3381–3389
Karim Z, Hadji R, Hamed Y (2019) GIS-based approaches for the landslide susceptibility prediction in setif region (NE Algeria). Geotech Geol Eng 37:359. https://doi.org/10.1007/s10706-018-0615-7
Kingra PK, Majumder D, Singh SP (2016) Application of remote sensing and Gis in agriculture and natural resource management under changing climatic conditions. Agric Res J 53(3):295–302
Kowalski. WM, Hamimed M (2002) Analyse sedimentologique et paleogeographie des sediments miocenes (Langhien-Serravalien) des environs de Tebessa (NE de l’Algerie). Bulletin du Service Géologique de l’Algérie 12(1):49–75
Lamri T (2017) Contribution des imageries optique et radar à la cartographie géologique de la région d’Edembo (Hoggar oriental) (Doctoral dissertation)
Leverington DW, Moon WM (2012) Landsat-TM-based discrimination of lithological units associated with the Purtuniq ophiolite, Quebec, Canada. Remote Sens 4(5):1208–1231
Mahdadi F, Boumezbeur A, Hadji R, Kanungo DP, Zahri F (2018) GIS-based landslide susceptibility assessment using statistical models: a case study from Souk Ahras province, NE Algeria. Arab J Geosci 11(17):476
Mokadem N, Demdoum A, Hamed Y, Bouri S, Hadji R, Boyce A, Laouar R, Saad A (2016) Hydrogeochemical and stable isotope data of groundwater of a multi-aquifer system: Northern Gafsa basin e Central Tunisia. J Afr Earth Sci 114:174–191
Mouici R, Baali F, Hadji R, Boubaya D, Audra P, Fehdi CÉ, Arfib B (2017) Geophysical, Geotechnical, and Speleologic assessment for karst-sinkhole collapse genesis in Cheria plateau (NE Algeria). Min Sci 24:59–71
Ngcofe L, Van Niekerk A (2016) Advances in optical earth observation for geological mapping: a review. South Afr J Geomat 5(1):1–16
Raïs K, Kara M, Gadri L, Hadji R, Khochman L (2017) Original Approach for the drilling process op-timization in open cast mines; case study of Kef Essenoun open pit mine Northeast of Algeria. Min Sci 24:147–159
Rouabhia A, Djabri L, Hadji R, Baali F, Fahdi Ch, Hanni A (2012) Geochemical characterization of groundwater from shallow aquifer surrounding Fetzara Lake NE Algeria. Arab J Geosci 5(1):1–13
Simon N, Ali CA, Mohamed KR, Sharir K (2016) Best band ratio combinations for the lithological discrimination of the Dayang Bunting and Tuba Islands, Langkawi, Malaysia. Sains Malays 45(5):659–667
Van der Meer FD, Van der Werff HM, Van Ruitenbeek FJ, Hecker CA, Bakker WH, Noomen MF, Woldai T (2012) Multi-and hyperspectral geologic remote sensing: a review. Int J Appl Earth Obs Geoinf 14(1):112–128
Zahri F, Boukelloul M, Hadji R, Talhi K (2016) Slope stability analysis in open pit mines of Jebel Gustar career, NE Algeria—a multi-steps approach. Min Sci 23:137–146
Zerrouki H, Hafid F, Lassaad G, Djabri L (2013) Aperçu géomorphologique et hydrologique de la grotte de Bouakkous (Hammamet-Tébessa, Alégrie). Synthèse: Revue des Sciences et de la Technologie 26(1):112–117
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Tamani, F., Hadji, R., Hamad, A. et al. Integrating Remotely Sensed and GIS Data for the Detailed Geological Mapping in Semi-Arid Regions: Case of Youks les Bains Area, Tebessa Province, NE Algeria. Geotech Geol Eng 37, 2903–2913 (2019). https://doi.org/10.1007/s10706-019-00807-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10706-019-00807-2