Abstract
This paper addresses the analysis of active constrained layer damping (ACLD) of geometrically nonlinear transient vibrations of laminated thin composite cylindrical panels using piezoelectric-fiber- reinforced composite (PFRC) materials. The constraining layer of the ACLD treatment is considered to be made of the PFRC materials. The Golla–Hughes–McTavish (GHM) method has been implemented to model the constrained viscoelastic layer of the ACLD treatment in time domain. The Von Kármán type-nonlinear strain-displacement relations and a simple first-order shear deformation theory are used for deriving this electromechanical coupled problem. A three-dimensional finite element (FE) model of smart composite panels integrated with the patches of such ACLD treatment has been developed to demonstrate the performance of these patches on enhancing the damping characteristics of thin symmetric and antisymmetric laminated cylindrical panels in controlling the geometrically nonlinear transient vibrations. The numerical results indicate that the ACLD patches significantly improve the damping characteristics of both symmetric and antisymmetric panels for suppressing the geometrically nonlinear transient vibrations of the panels. The effect of the shallowness angle of the panels on the control authority of the patches has also been investigated.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bailey T., Hubbard J.E.: Distributed piezoelectric polymer active vibration control of a cantilever beam. J. Guid. Control Dyn. 8, 605–611 (1985)
Baz A., Poh S.: Performance of an active control system with piezoelectric actuators. J. Sound Vib. 126, 327–343 (1988)
Lee C.K., Chiang W.W., Sulivan O.: Piezoelectric modal sensor/actuator pairs for critical active damping vibration control. J. Acoust. Soc. Am. 90(1), 374–384 (1991)
Hanagud S., Obal M.W., Calise A.J.: Optimal vibration control by the use of piezoceramic sensors and actuators. J. Guid. Control Dyn. 15(5), 1199–1206 (1992)
Devasia S., Tesfay M., Padu B., Bayo E.A.J.: Piezoelectric actuator design for vibration suppression: placement and sizing. J. Guid. Control Dyn. 16, 859–864 (1993)
Gu Y., Clark R.L., Fuller C.R.: Experiments on active control of plate vibration using piezoelectric actuators and polyvinylidene fluoride modal sensors. J. Vib. Acoust. 116, 303–308 (1994)
Kim J., Varadan V.V., V. K., Bao X.Q.: Finite element modeling of a smart cantilever plate and comparison with experiments. Smart Mater. Struct. 5(2), 165–170 (1996)
Heyliger P.: Exact solutions for simply supported laminated piezoelectric plates. ASME J. Appl. Mech. 64, 299–306 (1997)
He L.H.: Axisymmetric response of circular plates with piezoelectric layers: an exact solution. Int. J. Mech. Sci. 40(12), 1265–1279 (1998)
Vel S.S., Batra R.C.: Exact solution for rectangular sandwich plates with embedded piezoelectric hear actuators. AIAA J. 39(7), 1363–1373 (2001)
Irschick H.: A review on static and dynamic shape control of structures by piezoelectric and actuators. Eng. Struct. 24(1), 5–11 (2002)
Ray M.C.: Optimal control of laminated shells with piezoelectric sensor and actuator layers. AIAA J. 41, 1151–1157 (2003)
Xu S.X., Koko T.S.: Finite element analysis and design of actively controlled piezoelectric smart structures. Finite Elements Anal. Des. 40(3), 241–262 (2004)
Peng F., Ng A., Hu Y.R.: Actuator placement optimization and adaptive vibration control of plate smart structures. J. Intell. Mater. Syst. Struct. 16, 263–271 (2005)
Meng G., Ye L., Dong X.J., Wei K.X.: Closed loop finite element modeling of piezoelectric smart structures. Shock Vib. 13(1), 1–12 (2006)
Kumari P., Nath J.K., Dumir P.C., Kapuria S.: 2D exact solutions for flat hybrid piezoelectric and magnetoelastic angle-ply panels under harmonic load. Smart Mater. Struct. 16(5), 1651–1661 (2007)
Kwak M.K., Heo S., Jeong M.: Dynamic modeling and active vibration controller design for a cylindrical shell equipped with piezoelectric sensors and actuators. J. Sound Vib. 321, 510–524 (2009)
Balamurugan V., Narayanan S.: Finite element modeling of stiffened piezolaminated plates and shells with piezoelectric layers for active vibration control. Smart Mater. Struct. 19, 105003 (2010)
Baz, A.: Active constrained layer damping. U.S. patent 5,485,053 (1996)
Baz A., Ro J.: Vibration control of plates with active constrained layer damping. Smart Mater. Struct. 5, 135–144 (1996)
Ray M.C., Baz A.: Optimization of energy dissipation of active constrained layer damping treatment of plates. J. Sound Vib. 208, 391–406 (1997)
Ray M.C., Baz A.: Control of nonlinear vibration of beams using active constrained layer damping treatment. J. Vib. Control 7, 539–549 (2001)
Ray M.C., Oh J., Baz A.: Active constrained layer damping of thin cylindrical shells. J. Sound Vib. 240(5), 921–935 (2001)
Chantalakhana C., Stanway R.: Active constrained layer damping of clamped-clamped plate vibrations. J. Sound Vib. 241(5), 755–777 (2001)
Ro J, Baz A.: Optimum placement and control of active constrained layer damping using modal strain energy approach. J. Vib. Control 8, 861–876 (2002)
Ray M.C., Pradhan A.K.: Active damping of laminated thin cylindrical composite panels using vertically/obliquely reinforced 1-3 piezoelectric composites. Acta Mech. 209(3–4), 201–218 (2010). doi:10.1007/s00707-009-0149-4
Mallik N., Ray M.C.: Effective coefficients of piezoelectric fiber reinforced composites. AIAA J. 41(4), 704–710 (2003)
Ray M.C., Mallik N.: Performance of smart damping treatment using piezoelectric fiber reinforced composites. AIAA J. 43(1), 184–193 (2005)
Ray M.C., Shivakumar J.: Active constrained layer damping of geometrically nonlinear transient vibrations of composite plates using piezoelectric fiber-reinforced composite. Thin-Walled Struct. 47, 178–189 (2009)
Panda S., Ray M.C.: Active constrained layer damping of geometrically nonlinear vibrations of functionally graded plates using piezoelectric fiber reinforced composites. Smart Mater. Struct. 17(2), 1–15 (2008)
Sarangi S.K., Ray M.C.: Smart damping of geometrically nonlinear vibrations of laminated composite beams using vertically reinforced 1-3 piezoelectric composites. Smart Mater. Struct. 19, 075020 (2010)
Sarangi S.K., Ray M.C.: Active damping of geometrically nonlinear vibrations of laminated composite plates using vertically/obliquely reinforced 1-3 piezoelectric composites. Acta Mech. 222(3–4), 363–380 (2011). doi:10.1007/s00707-011-0531-x
Sarangi S.K., Ray M.C.: Active damping of geometrically nonlinear vibrations of laminated composite shallow shells using vertically/obliquely reinforced 1-3 piezoelectric composites. Int. J. Mech. Mater. Des. 7(1), 29–44 (2011)
Reddy J.N., Chandrashekara K.: Nonlinear analysis of laminated shells including transverse shear strains. AIAA J. 23, 40–41 (1985)
Kundu C.K., Han J.H.: Nonlinear buckling analysis of hygrothermoelastic composite shell panels using finite element method. Composites B 40, 313–328 (2009)
Lam M.J., Inman D.J., Saunders W.R.: Hybrid damping models using the Golla_hughes-McTavish method with internally balanced model reduction and output feedback. Smart Mater. Struct. 9, 362–371 (2000)
Mc Tavish D.J., Hughes P.C.: Modeling of linear viscoelastic space structures. J. Vib. Acoust. 115, 103–113 (1993)
Lim Y.-H., Varadan V.V., Varadan K.K.: Closed loop finite element modeling of active constrained layer damping in the time domain analysis. Smart Mater. Struct. 11, 89–97 (2002)
Reddy J.N.: Geometrically nonlinear transient analysis of laminated composite plates. AIAA J. 21(4), 621–629 (1983)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shivakumar, J., Ashok, M.H. & Ray, M.C. Active control of geometrically nonlinear transient vibrations of laminated composite cylindrical panels using piezoelectric fiber reinforced composite. Acta Mech 224, 1–15 (2013). https://doi.org/10.1007/s00707-012-0724-y
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-012-0724-y