Abstract
Hydrocolloids in foods play a vital role in developing food systems with enhanced rheology, quality, organoleptic properties and nutritional value in food industry. Hydrocolloids possess the ability to modify viscosity and texture of a food system. Modification of viscosity and texture in a food will directly affect for the sensory attributes of a food product. Enhancement of these attributes leads to increased consumer acceptance towards the developed food product. Hydrocolloids of natural, semi-synthetic and synthetic origin could be used in the food industry. However, natural hydrocolloids are most preferred due to their inherent benefits. Hydrocolloids have the possibility to function as, thickeners, gelling agents, emulsifiers and stabilizers while they also have applications in development of edible films and edible coating formulations. Beside these inherent functional properties, hydrocolloids have become attractive due to their dietary fibre aspect which provide a wide array of health benefits to the consumer. Hence, hydrocolloids act as health promoters by reducing the risk of cardiovascular diseases, reducing the risk of obesity, regulating glycemic response and maintaining colonic health. This review provides a discussion on food hydrocolloids, their basic functionality, properties and applications in food industry.
Graphical abstract
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
At present, research in the field of food science are focusing on fabrication of different colloidal systems enhancing rheology, quality, organoleptic properties and nutritional value [1]. Thus, hydrocolloids play a vital role in achieving this target. Due to these resent trends, hydrocolloid production and sales is increasing globally. According to data stated in studies, the hydrocolloid market valued 5.70 billion in 2015 and it is estimated to reach 7.56 billion by 2020 [2]. These data denote the industrial importance achieved by hydrocolloids in recent years.
Hydrocolloids can be defined as heterogeneous group of long chain polymers which form viscous dispersions and/or gels when dispersed in water. Hydrocolloids can be either polysaccharides or proteins [3]. Gelling, thickening and stabilising functions of hydrocolloids are used in different industrial sectors, especially in food industry. These polymers are comprised of a large number of hydroxyl groups. These hydroxyl groups increase their affinity for binding with water molecules making them hydrophilic. Further, these polymers exhibits the properties of a colloid by producing a dispersion, which is intermediate between a true solution and a suspension. Thus, considering these two properties, these polymers are named as hydrophilic colloids’ or ‘hydrocolloids’ [3].
Hydrocolloids are commonly used in food products such as, yoghourt, ice creams, sauces, dressings and mayonnaise. They provide functions such as thickeners, gelling agents, foaming agents, acting as edible coatings, emulsifiers and stabilizers in food systems [4]. Hydrocolloids have the ability to modify the flow behaviour which is termed as viscosity and mechanical solid property which is termed texture of a food. Modification of viscosity and texture in a food will directly affect for the organoleptic properties which determine the consumer acceptance of a food. Thus, hydrocolloids are an important group of food additives used in the food industry [3].
Beside these inherent functional properties, hydrocolloids have become attractive due to its dietary fibre aspect which provide a wide array of health benefits to the consumer. Most food hydrocolloids fall in to the category of dietary fibre. Thus, there are instances where hydrocolloids are used to increase the fibre content of food products [4]. Fibre is an important ingredient in a healthy diet. The recommended average daily intake value of dietary fibre in the USA and UK is 25–30 g and more than 18 g, respectively [5, 6]. Intake of dietary fibre would provide health benefits such as prevention of cardiovascular diseases, proper weight management, postprandial blood glucose level, regulate glycemic response and maintenance of colonic health [4, 6, 7].
Based on the existing literature available on food hydrocolloids, it will be interesting to review about these hydrocolloids and their functional properties when being incorporated into several food products. Thus, this review aims at highlighting the main intrinsic functions of food hydrocolloids used in food industry.
Classification of hydrocolloids
Hydrocolloids are categorized as natural, semi-synthetic and synthetic considering their origin. Natural hydrocolloids which are the most preferred hydrocolloid group in food industry are introduced as hydrophilic polymers that are originated from natural sources such as microorganisms, plants, animals, and seaweeds. Semi-synthetic hydrocolloids are introduced as hydrocolloids which are obtained by modifying the natural sources while synthetic hydrocolloids are the hydrocolloids which are completely synthesized from petroleum-derived base materials by chemical processes in order to produce a product with structure similar to the structure of naturally derived polysaccharides [1]. Classification of hydrocolloids is shown in Fig. 1.
Natural hydrocolloids
Natural hydrocolloids are widely used in the food industry. The advantages of using natural hydrocolloids over synthetic hydrocolloids include biocompatibility, non-toxic nature, easiness of handling, capability of modifying physically or chemically, eco-friendliness, cost-effectiveness, and more public acceptance since the polymers are extracted from natural renewable sources [1]. However, disadvantages of natural hydrocolloids over synthetic and semi-synthetic hydrocolloids are that its requirement to be incorporated in high quantities to be effective as emulsifiers and the susceptibility to microbial degradation [8]. Main sources of natural hydrocolloids are tabulated in Table 1.
Plant-derived cellulose is a commonly used hydrocolloid which could also be modified in to variety of semi-synthetic hydrocolloids. Generally, cellulose is obtained from wood. However, non-wood sources such as cotton fibre, pea hull fibre, ramie fibre, banana fibre, sisal fibre, kenaf pulp, and flax fibre could also be used. Exceptionally to those sources bacteria, algae, and marine tunicates could also be used in cellulose production [11]. Starches are also an important natural food hydrocolloid. As starches, corn, rice, potato, wheat, and tapioca starch are popular in food industry. Functional properties of native starches in food systems differ depending on their granule size and amylose to amylopectin ratios [11]. Pectin is another hydrocolloid which is of high interest. Pectin is widely extracted from citrus peels and apple pomace. However, due to high demand for pectin in food industry, alternative sources such as sunflower heads and sugar beet pulp are also utilized in extracting pectins. Major industrially utilized pectin forms are high-methyl ester pectin (HMP, and pectins obtained by HMP modification such as low-methyl ester pectin (LMP) and amidated low-methyl ester pectin [11]. Gums derived from different plants are also used as hydrocolloids in food industry. Guar gum of seeds of the tree Cyamopsis tetragonoloba, locust bean gum of seeds of the carob tree Ceratonia siliqua, karaya gum of Sterculia urens tree, gum tragacanth from stems and branches of Asiatic species of Astragalus, basil seed gum of Ocimum basilicum, balangu seed gum of Lallemantia royleana, tara gum of the seeds of Caesalpinia spinosa, wild sage seed gum of Salvia macrosiphon, cress seed gum of Lepidium sativum and gum Arabic as an exudate of mature trees of Acacia Senegal and Acacia seyal are also used in the food industry [10, 11, 13].
Animal-derived hydrocolloids have mostly originate from skins and bones of animals such as swine and cattle. Examples for animal derived hydrocolloids are given in Table 1. Gelatin is the most widely used animal-derived hydrocolloid which accounts for around 99% of the overall market of animal hydrocolloids [1]. Gelatin is a non-immunogenic protein-based biodegradable hydrocolloid which is comprised of repeating sequences of glycine-proline-hydroxyproline amino acids over the polymer chain to form a triple helical structure. It is mostly extracted from animal connective tissue (collagen) found in skins or bones of different animal species such as cows, pigs, fish and poultry [1, 14]. Whey protein or serum protein is another possible hydrocolloid. It is the main by-product of cheese manufacturing which possess a high nutritional value and biocompatibility. There is a possibility of using whey as a hydrocolloid in food products due to its large range of applicability to forms gels, emulsion and gelled emulsion [1]. Chitosan is another popular hydrocolloid which is used in the food industry. Chitosan is obtained by deacetylation of chitin [15]. Chitosan can be obtained from exoskeleton of crustaceans, invertebrates and fungi. It is composed of random molecules of β-(1–4)-linked D-glucosamine and N-acetyl-D-glucosamine in the linear polysaccharide chain [16].
Seaweed-derived hydrocolloids have also gained a popularity in the food industry. Agar and carrageenans which are extracted from red seaweeds (Rhodophyceae) and alginate which is extracted from brown seaweeds (Phaeophyceae) are the main seaweed-derived hydrocolloids utilised in the food industry. Agars are most commonly extracted from red seaweeds Gelidium and Gracilaria [17]. Carrageenan can be extracted from red algae varieties such as Chondrus, Gigartina, Eucheuma and Hypnea [18]. Alginate can be extracted from brown algae varieties such as Macrocystis, Laminaria, Ascophyllum, Ecklonia, Eisenia, Nereocystis and Sargassum [19, 20]
Extracellular polysaccharides produced by microorganisms are accounted as microbial hydrocolloids. Major microbial food hydrocolloids include fungal polysaccharides such as pullulan from Aureobasidium pullulans and bacterial exopolysaccharides such as xanthan gum from Xanthomonas campestris, gellan from Pseudomonas elodea, and cellulose from Komagataeibacter xylinus and Acetobacter xylinum [11]. Among microbial hydrocolloids xanthan gum accounts for over 90% of the global food market for microbial hydrocolloids [1].
Semi-synthetic hydrocolloids
Semi-synthetic hydrocolloids are produced through chemically modifying the hydrocolloids obtained from natural sources. Semi-synthetic hydrocolloids are stronger emulsifiers, non-toxic and less likely to undergo microbial growth [8]. Cellulose derivatives and starch derivatives are promising hydrocolloids which are classified under semi-synthetic hydrocolloids. Cellulose derivatives can be made by etherification, esterification, crosslinking or graft copolymerization of cellulose. Etherification of cellulose yields cellulose derivatives such as hydroxylpropyl methylcellulose (HPMC) and carboxyl methylcellulose (CMC). Esterification of cellulose results cellulose derivatives such as cellulose acetate and cellulose acetate phthalate [12]. Sodium salt of CMC is a major derivative used as a hydrocolloid in the food industry. Methylcellulose (MC) and hydroxyethyl cellulose (HEC) are some other chemically modified derivatives of cellulose. Other than that, nanofibrillated cellulose and microcrystalline cellulose (MCC) are also cellulose derivatives which could be obtained by physical modification of cellulose [11].
Acetylated starch (AS), phosphorylated starch (PS), and hydroxypropylated starch (HPS) are examples for starch derivatives which could be used as semi-synthetic hydrocolloids [8].
Synthetic hydrocolloids
Synthetic hydrocolloids are chemically produced hydrocolloids. These are basically derived from chemical combinations to give a product having a structure similar to the naturally derived hydrocolloids. Acrylate copolymers, carboxyvinyl polymers (Carbopol), polyethylene oxide polymers (Polyox) and polyvinylpyrrolidone (PVP) are examples of synthetic hydrocolloids. Synthetic hydrocolloids could be considered as the strongest emulsifiers. Another advantage is that they do not support microbial growth. The synthetic hydrocolloids are mainly limited to use as oil-in-water emulsifiers [8, 21]. However, there are few disadvantages which could limit the usage of synthetic hydrocolloids in food industry. Those disadvantages include high production cost, toxicity to the consumers, high environmental pollution during the synthesis process and poor biocompatibility compared to naturally derived sources [8].
Functional properties of hydrocolloids
Hydrocolloids have gained an attention in different sectors such as food, pharmaceutical, biotechnology, agricultural and chemical industries. Hydrocolloids have become attractive in food industry since they are capable of altering the rheology of food systems. Alteration of rheology could result in food systems with modified sensory properties with higher consumer acceptance. Thus, permitted hydrocolloids are used as significant food additives in food systems to perform specific purposes in different food systems [22]. Those specific purposes of hydrocolloids in food systems include acting as thickeners, gelling agents, emulsifiers, encapsulating agents, fat replacers, adhesives and coating agents in food systems.
Thickening properties
Hydrocolloids are commonly used as thickening agents in different food systems. Thickening is the property of hydrocolloids that involves nonspecific entanglement of conformationally disordered polymer chains with solvent. This phenomena occurs only above critical concentration known as overlap concentration (C*) [1]. Below the overlap concentration, the polymer chains in the polymer dispersion act as random coils of disordered arrangement. Thus, these polymer dispersions behave as Newtonian fluids that does not exhibit thickening property. However, at concentrations above the overlap concentration, polymer chains contact with each other and are less mobile resulting thickening. When thickening is taking place, polymer dispersions exhibit a non-Newtonian behaviour [9]. Thickening effect of hydrocolloids is governed by the type of hydrocolloid used, concentration of the hydrocolloid used and the properties of the food system such as temperature and pH [3].
Generally, hydrocolloids which have the potential to give a higher viscosity at relatively low concentration are most preferred in food products. Intrinsic viscosity (ƞ) is a parameter used to compare the viscosities of hydrocolloid dispersions. Intrinsic viscosity can be correlated with the molecular mass of the hydrocolloid (M) by Mark–Houwink relationship which is shown in the following equation [3, 7].
where M is the molecular weight and K and α are the parameters of Mark–Houwink equation.
Thus, according to the equation, higher the molecular weight of the polymer, greater the intrinsic viscosity produced by the hydrocolloid in an aqueous medium. Except for molecular weight, factors such as hydrodynamic size and presence of charged polymers may also have a significant effect on thickening efficiency. Linear molecules with the larger hydrodynamic size give much higher viscosity than highly branched and highly flexible polymers of the same molecular mass. On the other hand, when there are ionic functional groups present in the polymer chain of the hydrocolloid, it causes expansion of polymer chains due to intermolecular charge repulsions. This result solutions with higher viscosity than a solution with non-ionic polymers with a similar molecular mass. Thus, this shows that hydrocolloids with a high molecular mass and a linear structure with charged functional groups are more pronounced thickeners [11].
Gelling property
In the food industry, there are wide array of food products which are marketed as gels. They include jams, jelly, desserts, fruit jellies, certain confectionary products, salad dressings, marmalade, etc. Hydrocolloids which perform the function of gelling agents play a vital role in determining the texture and other sensory attributes of these food products. Generally, gel character and texture of gels formed by gelling agents vary widely. Polysaccharide hydrocolloids such as natural gums, starches, pectins, agar–agar and certain proteins such as zein from corn are commonly used as gelling agents in food industry [23].
Gelation could be defined as a process of phase transformation of a high molecular aqueous dispersion which is termed as a sol to a colloidal dispersion or a gel. In this phenomena, formation of inter-molecular interactions between sol particles by association or crosslinking of polymer chains hinders the flow ability of the sol and forms a three dimensional stable structure which is resistant to external stresses [1]. Water molecules will be trapped within the structure making them immobilize. Gels can be further introduced as viscoelastic systems. These systems have a storage modulus (G′) larger than the loss modulus (G″) [23]. The associated regions with two or more polymer chains during gelation are known as ‘junction zones’ [3]. There are 3 mechanisms proposed for gelation of hydrocolloids. Those mechanisms include ionotropic gelation, cold-set gelation and heat-set gelation [24]. Ionotropic gelation is the gelation which occurs through crosslinking of hydrocolloid chains with ions, typically a cation-mediated gelation process of negatively charged polysaccharide polymer chains. The absence of specific ions at appropriate concentrations weakens the gelation property of certain hydrocolloids such as alginate, carrageenan, and pectin [25].
Ionotropic gelation
Ionotropic gelation can be carried out by the two techniques known as diffusion setting and internal gelation. Diffusion setting involves the introduction of a hydrocolloid solution to an ionic solution. There, gelation occurs through diffusion of ions into the hydrocolloid solution. The main disadvantage of internal gelation is the inhomogeneous gelation of gel particles. Internal gelation has become successful in overcoming the main disadvantage of diffusion setting. Internal gelation involves incorporation of an inactive form of the ion that will cause crosslinking of the hydrocolloid, which is then activated by a change in another parameter such as pH after sufficient dispersion of the ion is complete [24].
Cold-set gelation
In cold-set gelation, the solution is needed to be made by dissolving a hydrocolloid in powder form in water at high temperature or at boiling point and then cooled to room temperature. As the solution cools, enthalpically stabilized interchain helices may form from segments of individual chains, leading to a three-dimensional network. Examples for these type of hydrocolloids include gelatin and agar.
Heat-set gelation
In heat-set gelation, it requires the application of heat to gel formation. Examples for such systems include curdlan, methyl cellulose and starch. This technique is only applied when heat setting is required in foods (e.g. the use of starch in sauces). In heat setting mechanisms unfolding of native structures and their subsequent rearrangement into a network is taking place [3, 24].
Gel formation is a spontaneous process which can be either physically induced or chemically induced in a food system. Physically induced gelation could be achieved by controlling temperature and pressure. Chemically induced gelation occurs due to pH alterations and ionic strength. Heat-induced gelation which is achieved by controlling the temperature of the dispersion is the most prominent way of obtaining gels. Heat induced gelation is a two-step process. Supplying of energy causes unfolding of molecules to expose reactive sites. Then, higher molecular weight complexes are formed as a result of aggregation of these unfolded molecules [26]. Another factor that would affect on gelation would be pH. pH of a solution can be changed by addition of acids. pH alteration can change the net charge of the molecule. This would affect on the attractive and repulsive forces between molecules as well as the interactions between molecules and solvent. Thus, it would impact gelation. Another factor that determines gelation in a food system is the ionic strength. Monovalent and divalent cations such as sodium and calcium can increase the ionic strength of the gel. The electrostatic repulsive forces between the molecules are reduced or neutralised and gelation can occur. Ionic induced gelation is of greater importance in gels formed by hydrocolloids such as alginate, pectin or carrageenan [23].
Emulsification and surface active property
Emulsion is a mixture of two immiscible fluids where one phase is termed as the continuous phase and the other phase is termed as the dispersed phase [1]. Generally, dispersed phase is dispersed in the continuous phase as small spherical droplets. Oil-in-water and water-in-oil are the two main types of emulsions that are found in foods. Milk, cream, salad dressings, sauces and beverages are few food examples for oil-in-water emulsions while butter and margarine are two examples for water-in-oil emulsions. Other than that, there are some foods such as with other kinds of dispersed phases. For instance, gas bubbles are acting as the dispersed phase in whipped cream and ice crystals acts as the dispersed phase in ice cream [9]. Usually emulsifying agents are incorporated in to emulsions in order to maintain the proper texture and sensory attributes of these types of food products.
Emulsification and maintenance of emulsion stability by preventing this thermodynamically unstable emulsions breaking in to their constituent oil and aqueous phase is another important property exhibited by certain hydrocolloids. Emulsification property of hydrocolloids is utilized in food products such as carbonated soft drinks, ice creams, sauces and dressings. Among the hydrocolloids, most of them can act as stabilizing agents of oil-in-water emulsions. Since most hydrocolloids are not surface active, only few hydrocolloids can act as emulsifying agents [9]. Emulsification requires a substantial surface activity at the oil–water interface in order to facilitate the formation and stabilization of fine droplets during and after emulsification without coalesce [27]. Surface activity can be defined as the capacity to lower the tension at an oil–water interface. Gum Arabic, modified cellulose, pectins, modified starches and some galactomannans are the widely used polysaccharide based hydrocolloid emulsifiers in food industry [28]. Amphiphilic character of a biopolymer is an essential character for that biopolymer to be surface active. Thus, the presence of hydrophobic groups is a key factor for a hydrocolloid to be an emulsifier. Thus, surface active behaviour of certain types of hydrocolloids may be due to the non-polar character of the chemical groups attached to the hydrophilic polysaccharide backbone such as hydrophobically modified starch/cellulose derivatives or the presence of a protein fraction linked covalently or physically to the polysaccharide [28].
Edible films and coating agents
At present, edible coatings and films have become popular among people. Hydrocolloids acts as ingredients in different coating and film formulations in food industry. Edible films or coatings can be defined as, thin layers of edible components which are used as primary packages of a food product and consumed with the food itself. Generally, edible films are self-standing structures in nature, while edible coatings adhere to the surface of the food component [29]. Hydrocolloids such as cellulose derivatives, starches, alginates, pectins, chitosans, pullulan and carrageenans are widely used as a main components in edible film and coating formulation. Other than that, proteineous hydrocolloids such as Soybean proteins, corn zein, gelatin, and whey are also used in coating and film formulation [30]. These films and coatings are mostly applied on foods to enhance the shelf life by maintaining the desirable quality of the products throughout the shelf life.
Properties of some common hydrocolloids
Gum Arabic
Gum Arabic can be introduced as one of the oldest and well-known hydrocolloid among all natural hydrocolloids. Gum Arabic readily dissolve in water and give a clear solution of very pale yellow to orange- brown with a pH around 4.5. Gum Arabic is Newtonian in behaviour with its viscosity being shear rate independent. Gum Arabic is a polyelectrolyte. Thus, the solution viscosity decreases in the presence of electrolytes due to charge screening and at low pH when the carboxyl groups become undissociated [31]. Gum Arabic exhibit a good emulsifying ability. Emulsifying ability of gum Arabic decreases with the increase in temperature while the emulsifying ability increases with the increase in gum concentration and stirring time. The water holding capacity range for gum Arabic obtained from A. senegal was 65.40–65.80 [31].
Pectin
Pectin is a linear polyuronide having a galacturonic acid backbone which is partially esterified with methanol and acetate. Aqueous solution of pectin is opaque to yellowish. There are high methoxyl pectin (HMP) and low methoxyl pectin (LMP). HMP is cold water soluble while LMP only soluble as Na or K salt. Pectin is a commonly used gelling agent in the food industry. Required gelling agent concentration for LMP is 0.1–4% w/w while it is 2–4% w/w for HMP. LMP forms thermo-reversible gels in the presence of divalent cations such as Ca at low pH (3–4.5) while HMP form thermo-irreversible gels at high solid levels and low pH values [1].
Starch
Starch is commonly used as a thickening agent in food industry. Starch is composed of amylose and amylopectin. Starch is comprised of a lot of hydroxyl groups on the backbone, thus can be modified in to starch derived semi-synthetic hydrocolloids by incorporating functional groups [32]. Starch is insoluble in cold water and soluble in hot water. Dissolution of starch forms turbid suspensions that sediment at room temperature. Viscosity of a starch solution in water is low at room temperature while starch gelation takes place when heating. When the temperature of the starch solution exceeded 60 °C, starch granules swell and gelation takes place resulting heat-stable gels in water. Shear stability and pH stability of starch is low after gelation. Decomposition of starch takes place when cooking in acidic or alkaline systems (6 > pH > 8), oxidation by free radicles, at high shear forces and when exposed to certain enzymes. Gel transparency of starch gels is low and synaeresis in gels is high. Preferred dosage of starch to be incorporated in food is around 1–5% [33].
Locust bean gum
Locust bean gum is a popular stabilizer and a thickening agent. Locust bean gum partially soluble in cold water. A solubility of around 70–85% is shown in water when heated to 80 °C for 30 min. Maximum viscosity of locust bean gum can be obtained by hydration for about 2 h. [34] shows a non-Newtonian behaviour at high shear rates, but exhibits Newtonian flow behaviour at low shear rates. Intrinsic viscosity and molecular weight is lower compared to other galactomannan like guar and tara galactomannan. Locust bean gum shows a power law exponent ‘α’ of 0.77 of Eq. 1 when water is used as the solvent [34]. Generally, locust bean gum does not form gels under normal conditions but has a possibility to form a weak gel by applying a freeze–thaw treatment. It also forms gel in the presence of large amount of sucrose and maximum gel strength could be obtained by 45% w/w fructose, 50% w/w sucrose or sorbitol, and 55% w/w glucose [35]. Gel strength could be increased by blending locust bean gum with other gums like xanthan gum, k-carrageenan, etc. [34]. Locust bean gum shows high sorption heat of about 27 kJmol−1 which exhibits the less hygroscopicity of the gum [36].
Guar gum
Guar gum is commonly used as a thickener in the food industry. Guar gum swells and/or dissolves in polar solvent on dispersion and form strong hydrogen bonds while it forms weak hydrogen bonds on nonpolar solvents. Guar gum is stable over a pH range of about 1.0–10.5 with fastest hydration at pH 8–9 and slowest at pH above 10 and below 4. Guar gum exhibits a pseudoplastic or shear-thinning behaviour in aqueous solutions thereby reducing the viscosity with increasing shear rate. It also gives highly viscous solutions by rapidly hydrating in cold water. Complete hydration of guar gum yields a thixotropic rheological system. Viscosity of a guar gum solution is governed by temperature, pH, ionic strength, gum concentration used and type of agitation. Temperature range of 25–40 °C is desirable to reach maximum viscosities of guar gum dispersions. Generally, guar gum exhibits a Newtonian behaviour up to 0.5% concentration whereas at concentrations above 0.5% it shows a non-Newtonian behaviour and thixotropic systems. Incorporation of below 1% of guar gum is best suited in food products [37].
Konjac mannan
Konjac mannan is found in tubers of Konjac (Lasioideae Amorphophallus). Gelation of konjac mannan is induced by deacetylation. Deacetylated konjac glucomannan which is used to form thermos-irreversible gels is obtained by alkaline processing of konjac glucomannan. With the increase of deacetylation, gelation viscosity and elastic modulus will increase. Deacetylation of konjac glucomannan causes the konjac glucomannan molecular chain to change from semi-crimping to self-crimping which leads to self-aggregation between the konjac glucomannan molecules under heating conditions [38]. The lowest critical concentration of aqueous solution of konjac flour necessary for gel formation is about 0.5% [39].
Xanthan gum
Xanthan gum is popular as a thickener in the food industry. Xanthan gum is highly soluble in cold and hot water. Xanthan solutions are pseudoplastic, or shear thinning. Xanthan gum is highly viscous even at low polymer concentrations. Viscosity depends on the biopolymer concentration, temperature, pH and concentration of salts [40].
Carrageenan
Carrageenan consists of different types as λ, κ, ι, ε and μ. Aqueous solutions of carrageenan are opaque. All the above-mentioned carrageenan types are soluble in hot water while λ-Carrageenan and κ- carrageenan are soluble in cold water [1]. After dissolution, carrageenan forms highly viscous solutions. Viscosity may range between 30 and 300 cp [41]. Viscosity of the solution depends on temperature, concentration, presence of other solutes, type of carrageenan and molecular weight. Viscosity increases with the increases concentration and decreases with the increase of temperature. Depolymerisation of carrageenan occurs during acid catalysed hydrolysis and complete loss of carrageenan functionality occurs at elevated temperatures and low pH values. Carrageenan is stable within the pH range 5–10 [1]. Under proper conditions, κ-carrageenan and ι-carrageenan form thermo-reversible sol–gels. The gelling point of carrageenan may vary from 30 to 50 °C [41]. Gel strength ranges from 100 to 350 g/cm2. λ-carrageenan does not form gels. Concentration of carrageenan preferred in food products ranges from 0.005 to 2.0% by weight [42]. Carrageenan which was extracted from kappaphycus alvarezii before oven drying is shown in Fig. 2.
Agar
Agar is comprised of two basic polysaccharides as agarose and agaropectin. Agarose is the prominent polysaccharide among the two which is about 70% of the mixture [1]. Aqueous solutions are opaque and yellowish. Insoluble in cold water while soluble in hot water may be above 80 °C [1]. Viscosity of a solution may vary between 10 and 100 cp (41). Highly tolerant to temperature. Highly soluble in concentrated sugar solutions [1]. Agarose is responsible for gelling property of agar while agaropectin is responsible for thickening property [41]. Gel formation takes place on cooling and it is thermo-reversible [9]. Gelling point may vary from 32 to 45 °C, act as a gelling agent at concentrations 0.5–2% w/w [41]. During gelation, molecules undergo a coil-helix transition which is followed by aggregation of helices. Gel strength can be between 700 and 1000 g/cm2 [9, 41]. Levels of around 0.5–2% are utilized in food products [1]. Agar which was extracted from Gracilaria edulis before oven drying is shown in Fig. 3.
Alginate
Alginate is a polysaccharide which is extracted mainly from brown algae species. Alginate is soluble in water (except pure alginic acid and calcium alginate), forms aqueous solutions of opaque and brownish yellow after dissolution. Solutions exhibit pseudoplasticity (shear thinning) property due to parallel arrangement of linear molecule chain. Decomposition of alginate takes place by acid (pH < 5), alkaline (pH > 9), free radical oxidation and enzymes. Alginate form thermo-irreversible gels in the presence of divalent cations such as Ca2+ at low temperatures and pH values. Gels exhibit a high gel strength which is stable during cooking. Gel formation can be controlled by controlling the release of divalent cations or acids in to the medium. Gels exhibit synaeresis over storage time. Levels of 0.7–2% are preferred in foods [33]. Alginate which was extracted from Sargassum sp. before oven drying is shown in Fig. 4.
Gelatin
Gelatin is popular as a gelling agent in the food industry. Gelatin is derived from the parent protein collagen. Collagen containing tissues such as skins and bones of porcine, fish and bovine are used to obtain gelatin [9, 43]. Gelling temperature, melting temperature and solubility for mammalian gelatin 220 g bloom are 26–27 °C, 33–34 °C and greater than 40 °C, for cold fish gelatin are 4–8 °C, 14–16 °C and greater than 22 °C, for warm water fish gelatin are 21–22 °C, 28–29 °C and greater than 35 °C [9]. Bloom value of gelatin is a measure of the strength or the rigidity of the gelatin gel formed which is measured under standard conditions. The Bloom values of commercial gelatins are in the range of 50–300 g Bloom. A higher Bloom value of gelatin represents a higher gelling and a melting temperature and a stronger gel. The gelatins are classified as high-Bloom (200–300 g), medium-Bloom (100–200 g) and low-Bloom (50–100 g) [44]. Generally, gelatin forms thermo-reversible viscoelastic gels upon cooling. During gelation, a polypeptide chain takes an orientation to induce a reactive site. Later, condensation of two other chains near the reactive site occurs giving rise to triple helix formation, have a high water binding capacity. Gelling concentration is from 1 to 5% w/w. Dosage concentration preferred in food for effective functional properties is 0.1% [1].
Chitosan
Chitosan is a natural, biodegradable and a non-toxic hydrocolloid [45]. It is a water-soluble derivative of chitin. Chitosan is insoluble at higher pH ranges and dissolves easily at low pH conditions. Chitosan is insoluble in organic solvents. Chitosan also exhibits an antimicrobial property. It also exhibits mucoadhesive properties in vitro. Chitosan forms thermo-reversible gels by aggregation of chitosan chains through hydrophobic bonding [1, 45].
Carboxymethyl cellulose (CMC)
Anionic long chain linear polymer water soluble exhibit a high viscosity but viscosity will be reduced with the addition of electrolyte and at low pH. CMC is physiologically inert, non-caloric, odourless and tasteless. It forms clear solutions without any cloudiness [46].
Methyl cellulose
Methyl cellulose is the simplest cellulose derivative hydrocolloid. Viscosity of a methyl cellulose solution increases with the increase of temperature above a critical temperature point 29 ± 2 °C and may form a thermo-reversible gel, thus classified as a lower critical solution temperature polymer (LCST). Viscosity of a methyl cellulose solution is not affected by the addition of electrolytes or with the pH [47].
Hydroxypropyl methyl cellulose
Viscosity of a hydroxypropyl methyl cellulose solution increases with the increase of temperature (gelation may occur). Viscosity of such a solution is not affected by the addition of electrolytes or with the pH [9].
Applications
Applications and functions of common hydrocolloids which are used in the food industry are tabulated in the Table 2.
Marketed product of some common hydrocolloids
At present, the market share of hydrocolloids is exhibiting a growing trend. The market value for hydrocolloids is estimated to reach USD 7.56 billion by 2020 [2]. At present, seaweed-derived hydrocolloids have a global market value of approximately USD 1.1 billion, which is forecasted to increase. Among them, agars have the highest retail price per kg which is approximately USD 18. Among the seaweed hydrocolloids, carrageenan has the highest commercial total production of 60,000 ton/year and contribute to the highest total market value of USD 626 million per year [57]. It is also stated that the global market value for alginates is estimated to be USD 339 million/year. At present, the alginates market share by application in food industry and pharmaceutical industry has increased by 20%. The physicochemical properties of the marketed carrageenan, agar and alginate product are given in the following Table 3. The global market for pectin in 2015 was approximately USD 958 million with an annual growth rate of 7.3% during 2018–2023. The largest market for pectin in 2018 was in Europe which is around 31,000 metric tons that worth USD 420 million [58]. The marketed products of pectin can be stored in room temperature, soluble in pure water, has a neutral to fruity smell and has an appearance of white to light brown colour. The reported sales and market value for gum Arabic in 2002 were approximately 50,000 tons and USD 101 million which account for 3% of the global hydrocolloid market [59]. Marketed product of gum Arabic is available as white to yellowish-white flakes, powder, granules roller-dried or spray-dried materials, dissolve in water and insoluble in ethanol. Guar gum is also a widely used hydrocolloid in the food industry. India is considered as the leading producer of guar gum that accounts for 80% of the total guar gum production in the world [37]. India export guar gum to more than 100 countries worldwide. In 2017, India has exported USD 248.53 million worth guar gum to USA which is accounted for 52.3% of the total exports. The second largest export market for Indian guar gum is Norway which worth USD 34.67 million in 2017 that account for 7.3% of the market [37]. The marketed product of food grade guar gum for the food and pharmaceutical industry has particle size of 100 MESH with the viscosity 3000–6000 cps and particle size of 200 MESH with the viscosity 2000–9000 cps. Xanthan gum is another commonly used gum in the food industry. Considering the demand for Xanthan gum in various sectors, 86 000 tons of xanthan gum are produced every year at a cost of around USD 400 million per year. It is stated that from the total volume of the global production of xanthan gum, 65% is used by the food industry [60]. Marketed product of xanthan gum is normally cream white in colour, particle size of 80 MESH product can make solutions with viscosities more than 1200 cps while particle size of 200 MESH product can make solutions with viscosities more than 1400 cps. Among cellulose derivative hydrocolloids, carboxymethyl cellulose was identified as the first cellulose ether, which gained economic and industrial importance starting from 1920. Additionally, among cellulose derivative hydrocolloids, carboxymethyl cellulose ranks top in sales with more than 230,000 tons of annual sales volume, which is expected to increase every year [61]. Even though carboxymethyl cellulose is the prominent cellulose derivative used in the food industry, cellulose derivatives such as methyl cellulose and hydroxypropyl methyl cellulose can also be used in the food industry as hydrocolloids. Possible applications of methyl cellulose and hydroxypropyl methyl cellulose are given in Table 2. Marketed product of methyl cellulose produces clear, viscous, opalescent colloidal solutions in water and insoluble in ethanol or chloroform.
Conclusion
Hydrocolloids are a valuable group of additives that provide functions such as thickening, emulsifying, stabilizing, fat replacing, flavour encapsulating, edible coating and acting as gelling agents in a wide array of food systems. At present, consumer preference is more towards natural hydrocolloids mainly due to their non-toxicity, biocompatibility and eco-friendliness. However, semi-synthetic hydrocolloids which could be considered as stronger emulsifiers, non-toxic and less likely to undergo microbial growth have synthesized by chemically or physically modifying natural hydrocolloids alleviating certain disadvantages of natural hydrocolloids. Thus, semi-synthetic hydrocolloids could be preferred over synthetic hydrocolloids. Guar gum, locust bean gum, gum Arabic, xanthan gum, carrageenan, agar, alginate, gelatin, pectin, carboxymethyl cellulose, methyl cellulose and hydroxypropylmethyl cellulose are commonly used as thickeners, gelling agents and stabilizers in food products. Gum Arabic is the only naturally derived hydrocolloid emulsifier utilized in food industry. Other than that, most of these hydrocolloids have shown promising applications in development of edible coating and film formulations which are utilized in food industry to enhance the quality attributes of food products.
Availability of data and material
Not applicable.
Code availability
Not applicable.
References
Bisht B, Lohani UC, Kumar V, Gururani P, Sinhmar R (2020) Edible hydrocolloids as sustainable substitute for non-biodegradable materials. Crit Rev Food Sci Nutr. https://doi.org/10.1080/10408398.2020.1827219
Yousefi M, Jafari SM (2019) Recent advances in application of different hydrocolloids in dairy products to improve their techno-functional properties. Trends Food Sci Technol 88:468–483
Saha D, Bhattacharya S (2010) Hydrocolloids as thickening and gelling agents in food: a critical review. J Food Sci Technol 47(6):587–597
Li JM, Nie SP (2016) The functional and nutritional aspects of hydrocolloids in foods. Food Hydrocoll. https://doi.org/10.1016/j.foodhyd.2015.01.035
Rajapakse N, Kim SK (2011) Nutritional and digestive health benefits of seaweed. Adv Food Nutr Res. https://doi.org/10.1016/B978-0-12-387669-0.00002-8
Jayakody MM, Vanniarachchy MPG, Wijesekara WLI (2021) Development and characterization of a seaweed snack using Ulva fasciata. J Food Sci Technol. https://doi.org/10.1007/s13197-020-04880-x
Manzoor M, Singh J, Bandral JD, Gani A, Shams R (2020) Food hydrocolloids: functional, nutraceutical and novel applications for delivery of bioactive compounds. Int J Biol Macromol. https://doi.org/10.1016/j.ijbiomac.2020.09.182
Razavi SMA (2019) Introduction to emerging natural hydrocolloids. Emerg Nat Hydrocoll Rheol Funct. 1–52
Phillips GO, Williams PA (2009) Handbook of Hydrocolloids: 2nd edn
Salehi F (2019) Improvement of gluten-free bread and cake properties using natural hydrocolloids: a review. Food Sci Nutr 7(11):3391–3402
Yemenicioğlu A, Farris S, Turkyilmaz M, Gulec S (2020) A review of current and future food applications of natural hydrocolloids. Int J Food Sci Technol 55(4):1389–1406
Olorunsola EO, Adedokun MO (2014) Surface activity as basis for pharmaceutical applications of hydrocolloids: a review. J Appl Pharm Sci 4(10):110–116
Dionísio M, Grenha A (2012) Locust bean gum: exploring its potential for biopharmaceutical applications. J Pharm Bioallied Sci 4(3):175–185
Alipal J, Pu’ad NM, Lee TC, Nayan NH, Sahari N, Basri H, Idris MI, Abdullah HZ (2019) A review of gelatin: properties, sources, process, applications, and commercialisation. Mater Today Proc. https://doi.org/10.1016/j.matpr.2020.12.922
Qu B, Luo Y (2020) International journal of biological macromolecules chitosan-based hydrogel beads: preparations, modifications and applications in food and agriculture sectors: a review. Int J Biol Macromol. https://doi.org/10.1016/j.ijbiomac.2020.02.240
Manigandan V, Karthik R (2018) Chitosan applications in food industry. Biopolym Food Des. https://doi.org/10.1016/B978-0-12-811449-0/00015-3
Ben SR, Mensi F, Majdoub H, Ben SA, Ben SB, Bouraoui A (2018) Effects of depth and initial fragment weights of Gracilaria gracilis on the growth, agar yield, quality, and biochemical composition. J Appl Phycol. https://doi.org/10.1007/s10811-018-1414-5
Pierre G, Delattre C, Laroche C, Michaud P (2014) Galactans and its applications. Polysaccharides. 1–37
Pereira L, Gheda SF, Ribeiro-Claro PJ (2013) Analysis by vibrational spectroscopy of seaweed polysaccharides with potential use in food, pharmaceutical, and cosmetic industries. Int J Carbohydr Chem. https://doi.org/10.1155/2013/537202
Jayakody MM, Vanniarachchy MP, Wijesekara I (2022) Seaweed derived alginate, agar, and carrageenan based edible coatings and films for the food industry: a review. J Food Meas Charact. https://doi.org/10.1007/s11694-021-01277-y
Cassiday L (2012) Hydrocolloids get personal. Int News Fats Oils Relat Mater 23(6):349–352
Milani J, Maleki G (2012) Food industrial processes–Methods and equipment. In: Hydrocolloids in food industry. 2:2–37
Banerjee S, Bhattacharya S (2012) Food gels: gelling process and new applications. Crit Rev Food Sci Nutr 52(4):334–346
Burey P, Bhandari BR, Howes T, Gidley MJ (2008) Hydrocolloid gel particles: formation, characterization, and application. Crit Rev Food Sci Nutr 48(5):361–377
Draget KI, Strand B, Hartmann M, Valla S, Smidsrød O (2000) Ionic and acid gel formation of epimerised alginates; the effect of AlgE4. Int J Biol Macromol 27:117–122
Totosaus A, Montejano JG, Salazar JA, Guerrero I (2002) A review of physical and chemical protein-gel induction. Int J Food Sci Technol 37(6):589–601
Dickinson E (2003) Hydrocolloids at interfaces and the influence on the properties of dispersed systems. Food hydrocoll 17(1):25–39
Dickinson E (2009) Hydrocolloids as emulsifiers and emulsion stabilizers. Food Hydrocoll 23(6):1473–1482
Hassan B, Chatha SAS, Hussain AI, Zia KM, Akhtar N (2018) Recent advances on polysaccharides, lipids and protein based edible films and coatings: a review. Int J Biol Macromol 109:1095–1107
Pablo J, Jim A, Ibarz A (2011) Edible films and coatings: structures, active functions and trends in their use. Trends Food Sci Technol 22:292–303
Mariod AA (2018) Functional properties of gum Arabic. Gum Arab Struct Prop Appl Econ. https://doi.org/10.1016/B978-0-12-812002-6/00024-5
Xiao C (2013) Current advances of chemical and physical starch-based hydrogels. Starch/Staerke 65(1–2):82–88
Wustenberg T (2015) General overview of food hydrocolloids. Cellulose and cellulose derivatives in the food industry. Wiley, Germany
Barak S, Mudgil D (2014) Locust bean gum: processing, properties and food applications: a review. Int J Biol Macromol 66:74–80
Doyle JP, Giannouli P, Martin EJ, Brooks M, Morris ER (2006) Effect of sugars, galactose content and chainlength on freeze-thaw gelation of galactomannans. Carbohydr Polym 64(3):391–401
Torres MD, Moreira R, Chenlo F, Vázquez MJ (2012) Water adsorption isotherms of carboxymethyl cellulose, guar, locust bean, tragacanth and xanthan gums. Carbohydr Polym 89(2):592–598
Mudgil D, Barak S, Khatkar BS (2014) Guar gum: processing, properties and food applications—a review. J Food Sci Technol 51(3):409–418
Yang D, Yuan Y, Wang L, Wang X, Mu R, Pang J, Xiao J, Zheng Y (2017) A review on konjac glucomannan gels: microstructure and application. Int J Mol Sci 18(11):2250
Takigami S (2009) Konjac mannan. Handbook of hydrocolloids. Woodhead Publishing Limited, Sawston
García-Ochoa F, Santos VE, Casas JA, Gómez E (2000) Xanthan gum: Production, recovery, and properties. Biotechnol Adv 18(7):549–579
Tye YY, Rizal S, Campus D (2018) A review of extractions of seaweed hydrocolloids: properties and applications. Express Polym Lett 12(4):296
Necas J, Bartosikova L (2013) Carrageenan: a review. Vet Med 58(4):187–205
Ali A, Ahmed S (2018) Recent advances in edible polymer based hydrogels as a sustainable alternative to conventional polymers. J Agric Food Chem 66:6940–6967
Haug IJ, Draget KI (2009) InHandbook of hydrocolloids. Woodhead Publishing, Gelatin
Martău GA, Mihai M, Vodnar DC (2019) The use of chitosan, alginate, and pectin in the biomedical and food sector: biocompatibility, bioadhesiveness, and biodegradability. Polymers 11(11):1837
Arancibia C, Navarro-Lisboa R, Zúñiga RN, Matiacevich S (2016) Application of CMC as thickener on nanoemulsions based on olive oil: physical properties and stability. Int J Polym Sci. https://doi.org/10.1155/2016/6280581
Nasatto PL, Pignon F, Silveira JLM, Duarte MER, Noseda MD, Rinaudo M (2015) Methylcellulose, a cellulose derivative with original physical properties and extended applications. Polymers 7(5):777–803
Patel S, Goyal A (2015) Applications of natural polymer gum Arabic: a review. Int J Food Prop 18(5):986–998
Koocheki A, Ghandi A, Razavi SMA, Mortazavi SA, Vasiljevic T (2009) The rheological properties of ketchup as a function of different hydrocolloids and temperature. Int J Food Sci Technol 44(3):596–602
Brennan CS, Tudorica CM (2008) Carbohydrate-based fat replacers in the modification of the rheological, textural and sensory quality of yoghurt: comparative study of the utilisation of barley beta-glucan, guar gum and inulin. Int J Food Sci Technol 43(5):824–833
Raina CS, Singh S, Bawa AS, Saxena DC (2005) Textural characteristics of pasta made from rice flour supplemented with proteins and hydrocolloids. J Texture Stud 36(4):402–420
Sakhale BK, Badgujar JB, Pawar VD, Sananse SL (2011) Effect of hydrocolloids incorporation in casing of samosa on reduction of oil uptake. J Food Sci Technol 48(6):769–772
Hernández-nava R, López-malo A, Palou E, Ramírez-corona N, Jiménez-munguía MT (2020) Encapsulation of oregano essential oil (Origanum vulgare) by complex coacervation between gelatin and chia mucilage and its properties after spray drying. Food Hydrocoll. https://doi.org/10.1016/j.foodhyd.2020.106077
Maleki G, Woltering EJ, Mozafari MR (2022) Applications of chitosan-based carrier as an encapsulating agent in food industry. Trends Food Sci Technol. https://linkinghub.elsevier.com/retrieve/pii/S0924224422000012
Nasatto PL, Pignon F, Silveira JLM, Duarte MER, Noseda MD, Rinaudo M (2015) Methylcellulose a cellulose derivative with original physical properties and extended applications. Polymers 7(5):777–803
Albert A, Perez-munuera I, Quiles A, Salvador A, Fiszman SM, Hernando I (2009) Food Hydrocolloids Adhesion in fried battered nuggets: performance of different hydrocolloids as predusts using three cooking procedures. Food Hydrocoll. https://doi.org/10.1016/j.foodhyd.2008.11.015
Knudsen NR, Tutor M, Meyer AS (2015) Seaweed hydrocolloid production: an update on enzyme assisted extraction and modification technologies. Mar Drugs 13:3340–3359
Picot-Allain MC, Ramasawmy B, Extraction EMN (2020) characterisation, and application of pectin from tropical and sub-tropical fruits: a review. Food Rev Int 38(3):282–312
Al-Assaf S, Katayama T, Phillips GO, Sasaki Y, Williams PA (2003) Quality control of gum arabic. Foods Food Ingred J Jpn 208(10):771–780
Lopes BD, Lessa VL, Silva BM, La Cerda LG (2015) Xanthan gum: properties, production conditions, quality and economic perspective. J Food Nutr Res 54(3):185–194
Zennifer A, Senthilvelan P, Sethuraman S, Sundaramurthi D (2021) Key advances of carboxymethyl cellulose in tissue engineering & 3D bioprinting applications. Carbohydr Polym 256:117561
Acknowledgements
This review article is based on the work supported by University Research Grants (Grant No. ASP/ 01/RE/SCI/2019/16), University of Sri Jayewardenepura, Gangodawila, Nugegoda, Sri Lanka.
Funding
This work was supported by the University Research Grants, University of Sri Jayewardenepura, Gangodawila, Nugegoda, Sri Lanka (Grant No. ASP/01/RE/SCI/2019/16).
Author information
Authors and Affiliations
Contributions
All authors contributed to the study’s conception and design. The original draft of the manuscript was written by MMJ and KGK. Reviewing was done by MPGV and IW.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that there are no conflicts of interest regarding the publication of this paper.
Ethics approval
Not applicable.
Consent to participate
Not applicable.
Consent for publication
Not applicable.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Jayakody, M.M., Kaushani, K.G., Vanniarachchy, M.P.G. et al. Hydrocolloid and water soluble polymers used in the food industry and their functional properties: a review. Polym. Bull. 80, 3585–3610 (2023). https://doi.org/10.1007/s00289-022-04264-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00289-022-04264-5