Avoid common mistakes on your manuscript.
Erratum to: J Mol Evol (2014) 78:171–187 DOI 10.1007/s00239-014-9616-1
In Table 1 on page 174, the values of the standard molal entropy (S°) at 25 °C and 1 bar for GlyGly−, and those of the standard molal heat capacity (C p °) at 25 °C and 1 bar for GlyGly+ and GlyGly− are incorrect. The correct values are 49.72, 55.9 and 15.5, respectively. The errors of the C p ° values originated from the use of unit (J mol−1 K−1) instead of (cal mol−1 K−1). The error of the S° value originated from mistyping. The corrected Table 1 is given here.
In Eq. 39 on page 185, the positive sign in the term \(\left(\frac{1}{T+\Theta}\right)\) must be changed to the negative sign. The corrected Eq. 39 is written below.
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found under doi:10.1007/s00239-014-9616-1.
Rights and permissions
About this article
Cite this article
Kitadai, N. Erratum to: Thermodynamic Prediction of Glycine Polymerization as a Function of Temperature and pH Consistent with Experimentally Obtained Results. J Mol Evol 80, 319–320 (2015). https://doi.org/10.1007/s00239-015-9685-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00239-015-9685-9