Avoid common mistakes on your manuscript.
Correction to: The International Journal of Advanced Manufacturing Technology (2022) 118:703–735
The original article contained a mistake.
Details in reference 82 is incorrect.
From:
" [82] Guo W, Wu C, Ding Z, Zhou Q (2021) Prediction of surface roughness based on a hybrid feature selection method and long short-term memory network in grinding. Int J Adv Manuf Technol 112(9):2853–2871."
Should be changed to:
"[82] Aurich J C , Engmann J , Schueler G M , et al.(2009) Micro grinding tool for manufacture of complex structures in brittle materials. CIRP Annals, 58(1):311-314.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Sun, Y., Jin, L., Liu, M. et al. Correction to: A comprehensive review on fabrication of ultra small micro tools via electrical discharge machining-based methods. Int J Adv Manuf Technol 124, 1339 (2023). https://doi.org/10.1007/s00170-022-10624-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-022-10624-2