Abstract
Ultrasound injection molding has emerged as an alternative production route for the manufacturing of micro-scale polymeric components, where it offers significant benefits over the conventional micro-injection molding process. In this work, the effects of ultrasound melting on the mechanical and morphological properties of micro-polypropylene parts were characterized. The ultrasound injection molding process was experimentally compared to the conventional micro-injection molding process using a novel mold, which allows mounting on both machines and visualization of the melt flow for both molding processes. Direct measurements of the flow front speed and temperature distributions were performed using both conventional and thermal high-speed imaging techniques. The manufacturing of micro-tensile specimens allowed the comparison of the mechanical properties of the parts obtained with the different processes. The results indicated that the ultrasound injection molding process could be an efficient alternative to the conventional process.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Attia UM, Marson S, Alcock JR (2009) Micro-injection moulding of polymer microfluidic devices. Microfluid Nanofluid 7(1):1–28
Tseng SC, Chen YC, Kuo CL, Shew BY (2005) A study of integration of LIGA and M-EDM technology on the microinjection molding of ink-jet printers’ nozzle plates. Microsyst Technol 12(1–2):116–119
Angelov AK, Coulter JP (2008) The development and characterization of polymer microinjection molded gratings. Polym Eng Sci 48(11):2169–2177
Wallrabe, U., Dittrich, H., Friedsam, G., Hanemann, T., Mohr, J., Müller, K., . & Zißler, W. (2002). Micromolded easy-assembly multi fiber connector: RibCon®. Microsyst Technol, 8(2–3), 83–87
Yang C, Yin XH, Cheng GM (2013) Microinjection molding of microsystem components: new aspects in improving performance. J Micromech Microeng 23(9):093001
Whiteside BR, Martyn MT, Coates PD, Allan PS, Hornsby PR, Greenway G (2003) Micromoulding: process characteristics and product properties. Plast Rubber Compos 32(6):231–239
Hansen HN, Hocken RJ, Tosello G (2011) Replication of micro and nano surface geometries. CIRP Annals-Manufacturing Technology 60(2):695–714
Sorgato M, Masato D, Lucchetta G (2017) Effect of vacuum venting and mold wettability on the replication of micro-structured surfaces. Microsyst Technol 23(7):2543–2552
Sha B, Dimov S, Griffiths C, Packianather MS (2007) Micro-injection moulding: factors affecting the achievable aspect ratios. Int J Adv Manuf Technol 33(1–2):147–156
Masato D, Sorgato M, Lucchetta G (2016) Analysis of the influence of part thickness on the replication of micro-structured surfaces by injection molding. Mater Des 95:219–224
Lucchetta G, Sorgato M, Carmignato S, Savio E (2014) Investigating the technological limits of micro-injection molding in replicating high aspect ratio micro-structured surfaces. CIRP Annals-Manufacturing Technology 63(1):521–524
Masato D, Rathore J, Sorgato M, Carmignato S, Lucchetta G (2017) Analysis of the shrinkage of injection-molded fiber-reinforced thin-wall parts. Mater Des 132:496–504
Lucchetta G, Masato D, Sorgato M, Crema L, Savio E (2016) Effects of different mould coatings on polymer filling flow in thin-wall injection moulding. CIRP Annals-Manufacturing Technology 65(1):537–540
Giboz J, Copponnex T, Mélé P (2009) Microinjection molding of thermoplastic polymers: morphological comparison with conventional injection molding. J Micromech Microeng 19(2):025023
Michaeli W, Spennemann A, Gärtner R (2002) New plastification concepts for micro injection moulding. Microsyst Technol 8(1):55–57
Michaeli W, Kamps T, Hopmann C (2011) Manufacturing of polymer micro parts by ultrasonic plasticization and direct injection. Microsyst Technol 17(2):243–249
Wu W, Peng H, Jia Y, Jiang B (2017) Characteristics and mechanisms of polymer interfacial friction heating in ultrasonic plasticization for micro injection molding. Microsyst Technol 23(5):1385–1392
Jiang B, Peng H, Wu W, Jia Y, Zhang Y (2016) Numerical simulation and experimental investigation of the viscoelastic heating mechanism in ultrasonic plasticizing of amorphous polymers for micro injection molding. Polymers 8(5):199
Chen G, Guo S, Li H (2002) Ultrasonic improvement of rheological behavior of polystyrene. J Appl Polym Sci 84(13):2451–2460
Chen J, Chen Y, Li H, Lai SY, Jow J (2010) Physical and chemical effects of ultrasound vibration on polymer melt in extrusion. Ultrason Sonochem 17(1):66–71
Ávila-Orta C, Espinoza-González C, Martínez-Colunga G, Bueno-Baqués D, Maffezzoli A, Lionetto F (2013) An overview of progress and current challenges in ultrasonic treatment of polymer melts. Adv Polym Technol 32(S1):E582–E602
Sacristan M, Planta X, Morell M, Puiggali J (2014) Effects of ultrasonic vibration on the micro-molding processing of polylactide. Ultrason Sonochem 21(1):376–386
Grabalosa J, Ferrer I, Elías-Zúñiga A, Ciurana J (2016) Influence of processing conditions on manufacturing polyamide parts by ultrasonic molding. Mater Des 98:20–30
Michaeli W, Starke C (2005) Ultrasonic investigations of the thermoplastics injection moulding process. Polym Test 24(2):205–209
Negre Gubau P, Grabalosa Saubí J, Ferrer Real I, Ciurana QD (2015) Study of the ultrasonic molding process parameters for manufacturing polypropylene parts. Proc Eng 32:7–14
Ma Z, Balzano L, Portale G, Peters GW (2014) Flow induced crystallization in isotactic polypropylene during and after flow. Polymer 55(23):6140–6151
Babenko M, Sweeney J, Petkov P, Lacan F, Bigot S, Whiteside B (2018) Evaluation of heat transfer at the cavity-polymer interface in microinjection moulding based on experimental and simulation study. Appl Therm Eng 130:865–876
Fischer, C., & Drummer, D. (2016). Crystallization and mechanical properties of polypropylene under processing-relevant cooling conditions with respect to isothermal holding time. Int J Polym Sci 2016
Schrauwen BA, Janssen RP, Govaert LE, Meijer HE (2004) Intrinsic deformation behavior of semicrystalline polymers. Macromolecules 37(16):6069–6078
Gao S, Qiu Z, Ma Z, Yang Y (2017) Flow properties of polymer melt in longitudinal ultrasonic-assisted microinjection molding. Polym Eng Sci 57(8):797–805
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Masato, D., Babenko, M., Shriky, B. et al. Comparison of crystallization characteristics and mechanical properties of polypropylene processed by ultrasound and conventional micro-injection molding. Int J Adv Manuf Technol 99, 113–125 (2018). https://doi.org/10.1007/s00170-018-2493-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-2493-9