Abstract
This paper deals with the experimental study of the tool life transition and the wear monitoring during the turning operation of AISI D3 steel workpiece using coated carbide tool inserts (TiCN/Al2O3/TiN). A hybrid method, based on the combination of wavelet multi-resolution analysis (WMRA) and Empirical Mode Decomposition (EMD), is proposed to analyze vibratory signals acquired during the machining process. Using the mean power and the energy as main scalar indicators, the proposed method has been optimized and evaluated in several configurations including the cutting speed, the feed rate, and the depth of cut. The results show that the proposed hybrid method (WMRA/EMD) gives better evaluation of the tool state and the wear monitoring compared to the application of WMRA or EMD alone.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kulandaivelu P, Senthil Kumar P, Sundaram S (2013) Wear monitoring of single point cutting tool using acoustic emission techniques. Sadhana 38(2):211–234
Mathew MT, Srinivasa Pai P, Rocha LA (2008) An effective sensor for tool wear monitoring in face milling: acoustic emission. Sadhana 33(3):227–233
Kuljanic E, Sortino M (2005) TWEM a method based on cutting forces monitoring tool wear in face milling. Mach Tools Manuf 45:29–34
Lim GH (1995) Tool wear monitoring in machine turning. Mater Process Technol 51:25–36
Mahfouz IA (2003) Drilling wear detection and classification using vibration signals and artificial neural network. Mach Tools Manuf 43:707–720
Mer A, Diniz AE (1994) Correlating tool wear, tool life, surface roughness and tool vibration in finish turning with coated carbide tools. Wear 173:137–144
Dimla DE (2002) The correlation of vibration signal features to cutting tool wear in a metal turning operation. Int J Adv Manuf Technol 19:705–713
Das S, Roy R, Chattopadhyayal AB (1996) Evaluation of wear of turning carbide inserts using neural networks. Mach Tools Manuf 36:789–797
Haili W, Hua S, Ming C, Dejin H (2003) On-line tool breakage monitoring in turning. Mater Process Technol 139:237–242
Ravindra HV, Srinivasa YG, Krishnamurthy R (1997) Acoustic emission for tool condition monitoring in metal cutting. Wear 212:78–84
Babouri MK, Ouelaa N, Djebala A (2012) Identification de l'évolution de l'usure d'un outil de tournage basée sur l'analyse des efforts de coupe et des vibrations. Rev Sci Technol, Synthèse 24:123–134
Wang L, Mehrabi MG, Kannatey Asibu Jr (2001) Tool wear monitoring in reconfigurable machining systems through wavelet analysis. NAMRI/SME Trans 29:399–406
Engin S N, Gülez K A (1999) Wavelet transform artificial neural networks (WT-ANN) based rotating machinery fault diagnostics methodology. Nonlinear Signal and Image Processing NSIP 714–720
Mardapittas A S, YHJ Au (2008) Expert system for tool wear monitoring in blanking, Intelligent Fault Diagnosis—Part 1: Classification Based Technique
Lei Y, Lin J, He Z, Zuo MJ (2013) A review on empirical mode decomposition in fault diagnosis of rotating machinery. Mech Syst Signal Process 35:108–126
Silva RG, Reuben RL, Baker KJ, Wilcox SJ (1998) Tool wear monitoring of turning operations by neural networks and expert system classification of a feature set generated from multiple sensors. Mech Syst Signal Process 12(2):319–332
Djebala A, Ouelaa N, Hamzaoui N (2007) Optimisation de l’analyse multirésolution en ondelettes des signaux de chocs. Application aux signaux engendrés par des roulements défectueux. Mécanique Ind 4(8):379–389
Mallat S (1989) A theory for multiresolution signal decomposition: the wavelet representation. IEEE Trans Pattern Anal Mach Intell 11(7):674–693
Gao Q, Duan C, Fan H, Meng Q (2008) Rotating machine fault diagnosis using empirical mode decomposition. Mech Syst Signal Process 22:1072–1081
Liag H, Lin Q, Chen J D Z (2005) Application of the empirical mode decomposition to analysis of Esophageal Manometric Data in gastroesophageal reflux disease, IEEE; 52 (10)
Penga ZK, Tsea PW, Chub FL (2005) An improved Hilbert–Huang transform and its application in vibration signal analysis. J Sound Vib 286:187–205
Du Q, Yang S (2007) Application of the EMD method in the vibration analysis of ball bearings. Mech Syst Signal Process 21:2634–2644
Rilling G. (2007) Décompositions Modales Empiriques: Contributions la théorie, l'algorithme et l'analyse de performances. Ph.D. Thesis, INSA of Lyon, France
Huang NE, Shen Z, Long SR, Wu MC, Shih MH, Zheng Q, Yen NC, Tung CC, Liu HH (1998) The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proc R Soc Lond 454:903–995
Suresh R, Basavarajappa S, Samuel GL (2012) Some studies on hard turning of AISI 4340 steel using multilayer coated carbide tool. Measurement 45:1872–1884
Rmili W (2007) Analyse vibratoire pour l’étude de l’usure des outils de coupe en tournage. Thesis, University François Rabelais Tours, France
Babouri MK, Ouelaa N, Djebala A (2014) Temporal and frequential analysis of the tools wear evolution. Mechanika 20(2):205–2012
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Babouri, M.K., Ouelaa, N. & Djebala, A. Experimental study of tool life transition and wear monitoring in turning operation using a hybrid method based on wavelet multi-resolution analysis and empirical mode decomposition. Int J Adv Manuf Technol 82, 2017–2028 (2016). https://doi.org/10.1007/s00170-015-7530-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7530-3