Abstract
The manufacturing test part applications are essential for representations of machines’ capabilities. Commonly used NAS979 has been known to insufficiently evaluate the combination motions of rotary axes. Thus, a new test part, S part, has been presented to satisfy the increasing demand of a five-axis machine. In this paper, the model of S part is described in detail, which presents more characteristics in three-dimensional surface contours. According to the kinematics analysis, the speed of each axis and feed rate falls down and rises up on several positions. Each axis reverses the motion during the machining. Therefore, the S part makes high requirement on machine’s dynamic response.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Schmitz TL, Ziegert JC, Zapata R (2006) Part accuracy in high-speed machining: preliminary results. Proceeding of MESC, Ypsilanti, USA, MSEC:851–858
Andolfatto LL, Mayer JRR (2011) Evaluation of servo, geometric and dynamic error sources on five-axis high-speed machine tool. Int J Mach Tools Manuf 51:787–796
ISO 230–1 (1996) Test code for machine tools—part 1: geometric accuracy of machines operating under no-load or finishing conditions
Ibaraki S, Oyama C, Otsubo H (2011) Construction of an error map of rotary axes on a five-axis machining center by static R-test. Int J Mach Tools Manuf 51:190–200
Mehrdad G, Mayer JRR (2014) Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing. 87:89-95
NAS979 (1969) Uniform cutting test-NAS series, metal cutting equipment. NAS, USA
ISO 10791-7 (1988) Test conditions for machining centres—part 7: accuracy of a finished test piece
Burak S, Yusuf A, Elizabeth C (2009) Modeling and control of contouring errors for five-axis machine tools—part I: modeling. J Manuf Sci Eng 131:1–8
Zhenya H, Jianzhong F, Liangchi Z, Xinhua Y (2015) A new error measurement method to identify all six error parameters of a rotational axis of a machine tool. Int J Mach Tools Manuf 88:1–8
Song ZY, Cui YW (2009) S-shape detection test piece and a detection method for detection the precision of the numerical control milling machine. United States, Invention Patent, US8061052B2
Yamaguchi F (1988) Curves and surfaces in computer aided geometric design. Springer
Zhang YM, Lin XL, Wang XD, Cai GQ (2004) The study on the dynamic characteristic of high speed machine tool and experiment validate. Mater Sci Forum: 471–472
Ratchev S, Govender E, Nikov S et al (2003) Force and deflection modeling in milling of low-rigidity complex parts. J Mater Process Technol 143–144:796–801
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, W., Jiang, Z., Tao, W. et al. A new test part to identify performance of five-axis machine tool—part I: geometrical and kinematic characteristics of S part. Int J Adv Manuf Technol 79, 729–738 (2015). https://doi.org/10.1007/s00170-015-6870-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-6870-3