Abstract
A correct prediction of build time is essential to calculate the accurate cost of a layer manufactured object. The methods presented in literature are of two types: detailed–analysis- and parametric-based approaches. The former require that a lot of data, related to the kinematic and dynamic performance of the machine, should be known. Parametric models, on the other hand, are of general use and relatively simple to implement; however, the parametric methods presented in literature only provide a few of the components of the total build time. Therefore, their performances are not properly suited in any case. In order to overcome these limitations, this paper proposes a parametric approach which uses a more complete set of build-time driving factors. Furthermore, considering the complexity of the parametric build time function, an artificial neural network is used so as to improve the method flexibility. The analysis of the test cases shows that the proposed approach provides a quite accurate estimation of build time even in critical cases and when supports are required.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Rajenthirakumar D, Jagadeesh KA (2009) Analysis of interaction between geometry and efficiency of impeller pump using rapid prototyping. Int J Adv Manuf Technol 44:890–899
Vinodh S, Devadasan SR, Maheshkumar S, Aravindakshan M, Arumugam M, Balakrishnan K (2010) Agile product development through prototyping technologies: an examination pump-manufacturing company. Int J Adv Manuf Technol 46(5–8):663–679
Kechagias J, Maropoulos S, Karagiannis S (2004) Process build time estimator algorithm for lamined object manufacturing. Rapid Prototyping J 10(5):297–304
Alexander P, Allen S, Dutta D (1998) Part orientation and build cost determination in layered manufacturing. Comput-Aided Des 30(5):343–356
Byun H-S, Lee KH (2006) Determination of the optimal build direction for different rapid prototyping processes using multi-criterion decision making. Robot Comput-Integr Manuf 22:69–80
Luo RC, Tzou JH, Lan CC (2003) The development of web-based E-business system for rapid prototyping manufacturing. Industrial Electronics Society, IECON’03 2:1290–1295
Giannatsis J, Dedoussis V, Laios L (2001) A study of the build-time estimation problem for stereolithography systems. Robot Comput-Integr Manuf 17:295–304
Zhao J, Liu W, Wu J (2006) Determination of optimal build orientation based on satisfactory degree theory for RPT, J CAD/CAM, 6 (1)
Byun HS, Lee KH (2006) Determination of optimal build direction in rapid prototyping with variable slicing. Int J Adv Manuf Technol 28:307–313
Cheng W, Fuh J, Nee A, Wong YS, Loh HT, Miyazawa T (1995) Multi-objective optimization of part building orientation in stereolithography. Rapid Prototyping J 1(4):339–345
Frank D, Fadel G (1995) Export system-based selection of the preferred direction of build for rapid prototyping processes. J Intell Manuf 6(5):339–345
Xu F, Oh TL, Wong YS (1999) Consideration of optimal orientation for different rapid prototyping. Rapid Prototyping J 5(2):54–60
Ruffo M, Tuck C, Hague R (2006) Empirical laser sintering time estimator for Duraform PA. Int J Prod Res 44(23):5131–5146
Munguía J, Ciurana J, Riba C (2009) Neural-network-based model for build-time estimation in selective laser sintering. Proc Inst Mech Eng, B: J Eng Manuf 223(8):995–1003
Campbell I, Combrink J, de Beer D, Barnard L (2008) Stereolithography build time estimation based on volumetric calculation. Rapid Prototyping J 14(5):271–279
Nezhad AS, Vatani M, Barazandeh F, Rahimi A (2010) Build time estimator for determining optimal part orientation. Proc Inst Mech Eng B J Eng Manuf 224(12):1905–1913
Lan HB, Ding YC (2007) Price quotation methodology for stereolithography parts based on STL model. Comput Ind Eng 52(2):241–256
Pharm DT, Gault RS (1998) A comparison of rapid prototyping technologies. Int J Mach Tools Manuf 38:1257–1287
Yan X, Gu P (1996) A review of rapid prototyping technologies and systems. Comput-Aided Des 28(4):307–318
Cooper KG (2001) Rapid prototyping technology: selection and application. Dekker, New York
Chua CK, Leong KF (1997) Rapid prototyping: principles of applications and manufacturing. Wiley, Singapore
Di Angelo L, Di Stefano P (2010) Parametric cost analysis for WEB based e-commerce of layer manufactured object. Int J Prod Res 48(7):2127–2140
Nielsen RH (1989) Theory of the back-propagation neural networks. Proceedings IEEE, International Conference on Neural Networks 593–605
Sukthomya W, Tannock J (2005) The training of neural networks to model manufacturing processes. J Intell Manuf 16:39–51
The MathWorks Inc (2000) Neural network toolbox for use with MATLAB
Chang CC, Chang TYP, Xu YG, To WM (2002) Selection of training samples for model updating using neural networks. J Sound Vib 249(5):867–883
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Di Angelo, L., Di Stefano, P. A neural network-based build time estimator for layer manufactured objects. Int J Adv Manuf Technol 57, 215–224 (2011). https://doi.org/10.1007/s00170-011-3284-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-011-3284-8