Abstract
Over-adjustment to processes may result in shifts in process mean and variance, ultimately affecting the quality of products. An economic adjustment model is developed for the joint design of X̄-S2 control charts and ē-Se2 cause-selecting control charts to control both means and variances of two dependent process steps using the Markov chain approach. The objective is to determine the optimal control policy of the proposed control charts, which effectively detect and distinguish the shifts of means and variances on the dependent process steps and minimize the total quality control cost. Application of the proposed control charts is illustrated through a numerical example.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Deming WE (1982) Quality, productivity and competition Position. MIT Press, New York
Duncan AJ (1956) The economic design of \(\bar{X}\)charts used to maintain current control of a process. J Am Stat Assoc 51:228–242
Montgomery DC (1980) The economic design of control charts: a review and literature survey. J Qual Technol 12:75–78
Vance LC (1983) A bibliography of statistical quality control chart techniques, 1970-1980. J Qual Technol 15:59–62
Saniga E (1979) Statistical control-chart designs with application to \(\bar{X}\)and R charts. Manage Sci 31:313–320
Woodall WH (1986) Weakness of the economic design of control charts. Technometrics 28:408–409
Collani EV, Saniga E, Weigand A (1994) Economic adjustment designs for \(\bar{X}\)control charts. IIE Trans 26:37–43
Yang S, Rahim A (2000) Economic statistical design for \(\bar{X}\)and S2 control charts: a Markov chain approach. Commun Stat: Simul Comput 29:845–874
Yang S, Yang C (2004) Economic statistical process control for overadjusted process means. Int J Qual Reliabil Manage 21:412–424
Zhang G (1984) A new type of control charts and a theory of diagnosis with control charts. World Qual Congress Trans, Am Soc Qual Control, Milwaukee, WI pp 75–85
Wade R, Woodall W (1993) A review and analysis of cause-selecting control charts. J Qual Technol 25:161–169
Yang S (2005) Dependent processes control for over-adjusted process means. Int J Adv Manuf Technol 26:109–116
Yang S, Yang C (2004) Optimal management strategy for two dependent process steps with over-adjusted means. Technical report, Taiwan
Lorenzen T, Vance L (1986) The economic design of control charts: a unified approach. Technometrics 28:3–10
Ross SM (1993) Introduction to probability models. Academic, New York
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, CM., Yang, SF. Optimal control policy for dependent process steps with over-adjusted means and variances. Int J Adv Manuf Technol 29, 758–765 (2006). https://doi.org/10.1007/s00170-005-2574-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-005-2574-4