Abstract
This paper describes a preliminary ship design method using deterministic approach and probabilistic approach in the process of hull form design. In the deterministic approach, an interdisciplinary ship design method integrates principal dimension decisions and hull form variations in the preliminary ship design stage. Integrated ship design, as presented in this paper, has the distinctive feature that these parameters are evaluated simultaneously. Conversely, in sequential design, which is based on the traditional preliminary ship design process, hull form designs and principal dimension decisions are determined separately and sequentially. The current study adopts the first method to enhance the design quality in the early design stage. Furthermore, a probabilistic approach is applied to ship design to resolve uncertainties in design information more efficiently than a deterministic approach would.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Braun RD (1996) Collaborative optimization: an architecture for large-scale distributed design. Ph.D. Thesis, Stanford University, CA, USA
Holtrop J (1984) A statistical re-analysis of resistance and propulsion data. International Shipbuilding Progress, pp 272–276
Holtrop J, Mennen GJ (1982) An approximate power prediction method. International Shipbuilding Progress, pp 166–170
Kodiyalam S (1998) Evaluation of methods for multidisciplinary design optimization (MDO), Phase I, Paper No. NASA/CR-1998-208716
Lee KY, Roh MI, Cho SH (2001) Multidisciplinary design optimization of mechanical systems using collaborative optimization approach. Int J Veh Des 25(4):353–368
Lee JO, Yang YS, Ruy WS (2002) A comparative study on reliability-index and target-performance-based probabilistic structural design optimization. Comput Struct 80(3–4):257–269
Neu WL, Hughes O, Mason WH, Ni S, Chen Y, Ganesan V, Lin Z, Tumma S (2000a) A prototype tool for multidisciplinary design optimization of ships. Ninth congress of the International Maritime Association of the Mediterranean, Naples, Italy
Neu WL, Mason WH, Ni S, Lin Z, Dasgupta A, Chen Y (2000b) A multidisciplinary design optimization scheme for containerships. 8th AIAA symposium on multidisciplinary analysis and optimization, Long Beach, CA
Yang JM (2000) Propeller induced surface pressure and shear stress on the stern part of a full ship (in Korean). MS Thesis, Department Of Naval Architecture and Ocean Engineering, Seoul National University, Seoul, Korea
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, YS., Park, CK., Lee, KH. et al. A study on the preliminary ship design method using deterministic approach and probabilistic approach including hull form. Struct Multidisc Optim 33, 529–539 (2007). https://doi.org/10.1007/s00158-006-0063-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-006-0063-5