Abstract
A phenomenological description of crystallographic slip and pencil glide in single crystals is outlined, with emphasis on the behavior under prescribed strains. Theoretical relations are established between these single-crystal properties and the behavior of quasi-homogeneous, quasi-isotropic polycrystals deforming uniformly on a macroscopic scale, at subdiffusive temperatures. Experimental comparisons between single crystals and polycrystals are reviewed, considering flow stress, work hardening, temperature and strain rate effects, and various effects of grain size.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
L. A. Johnson, U. F. Kocks and B. Chalmers:Scripta Met., 1968, vol.2, pp.265–70. la. L. A. Johnson:Trans. TMS-AIME, 1969, vol. 245, pp. 275–82.
E. Schmid:Proc. Int’l. Cong. Appl. Mech. (Delft), 1924, p. 342.
F. A. McClintock and A. S. Argon:Mechanical Behavior of Materials, Addison-Wesley, 1966.
G. Y. Chin, R. N. Thurston and E. A. Nesbitt:Trans. TMS-AIME, 1966, vol.236, p. 69.
T. H. Lin:J. Franklin Inst, 1960, vol.270, pp. 291–300.
U. F. Kocks: Ph.D. thesis, 1959, Harvard Univ., Cambridge, Mass.
J. F. W. Bishop:Phil. Mag., 1953, vol.44, pp. 51–64.
A. V. Hershey:J. Appl. Mech., 1954, vol.21, pp. 241–49.
U. F. Kocks and T. J. Brown:Acta Met., 1966, vol.14, pp. 87–98.
U. F. Kocks:Acta Met., 1958, vol.6, pp. 85–94.
W. F. Hosford, Jr.:Trans. TMS-AIME, 1965, vol.233, pp. 329–33.
G. Y. Chin, E. A. Nesbitt and A. J. Williams:Acta Met., 1966, vol.14, pp. 467–76.
E. W. Kelley and W. F. Hosford, Jr.:Trans. TMS-AIME, 1968, vol.242, pp. 5–13, 654–60.
U. F. Kocks:Acta Met., 1960, vol.8, pp. 345–52.
G. I. Taylor:J. Inst. Met., 1938, vol.62, pp. 307–24;S. Timoshenko Anniversary Volume, pp. 218–24, Macmillan, 1938;Deformation and Flow of Solids, pp. 3–12, Springer, 1956.
G. Y. Chin, W. L. Mammel and M. T. Dolan:Trans. TMS-AIME, 1967, vol.239, pp. 1854–55.
W. F. Hosford, Jr.:Acta Met., 1966, vol.14, pp. 1085–94.
U. F. Kocks:Phil. Mag., 1964, vol.10, pp. 187–93.
H. R. Piehler:Met. Trans., 1970, vol. 1, in press.
W. E Hosford, Jr.: private communication, Univ. of Michigan, Ann Arbor, Mich.
U. F. Kocks:Trans. TMS-AIME, 1964, vol.230, pp. 1160–67.
B. Ramaswami, U. F. Kocks and B. Chalmers:Trans. TMS-AIME, 1965, vol.233, pp. 927–31.
O. Krisement, G. F. de Vries and F. Bell:Phys. Stat. Sol, 1964, vol.6, pp. 73–81.
Y. Nakada and A. S. Keh:Acta Met., 1966, vol.14, p. 961.
P. J. Jackson and Z. S. Basinski:Can. J. Phys., 1967, vol.45, pp. 707–35.
E. J. H. Wessels and P. J. Jackson:Acta Met., 1969, vol.17, pp. 241–8.
U. F. Kocks and D. G. Westlake:Trans. TMS-AIME, 1967, vol.239, pp. 1107–09.
E. Kröner:Z. Physik., 1958, vol.151, pp. 504–18.
E. Kröner:Acta Met., 1961, vol.9, pp. 155–61.
J. D. Eshelby:Proc. Roy. Soc., 1957, vol.A241, p. 376.
R.E. Hook, J. P. Hirth:Acta Met., 1967, vol.15, pp. 535–51, 1099–1110.
J. R. Willis:Quart. J. Mech. Appl. Math., 1964, vol.17, p. 157.
R. Hill:J. Mech. Phys. Sol., 1965, vol.13, pp. 89–101.
H. Payne, S. J. Czyzak, J. H. Greiner, and T. H. Lin:J. Mech. Phys. Sol., 1958, vol.6, pp. 314–20.
B. Budiansky and T. T. Wu: Proc. 4th Cong. Appl. Mech., 1962, p. 1175.
J. W. Hutchinson:J. Mech. Phys. Sol., 1964, vol.12, pp. 11–24.
W. Voigt:Wied. Ann., 1889, vol.38, p. 573.
A. Reuss:Z. Angew. Math. Mech., 1929, vol.9, p. 49.
R. Hill:Proc. Phys. Soc. London, 1952, vol.A65, p. 351.
D. C. Drucker, H. J. Greenberg, and W. Prager:J. Appl Mech., 1951, vol.18, pp. 371–78.
R. Hill:Phil. Mag., 1951, vol.42, pp. 868–75.
R. svon Mises:Z. Angew. Math. Mech., 1928, vol.8, pp. 161–85.
A. Kochendörfer:Plastische Eigenschaften, 1941, Springer.
G. Y. Chin and W. L. Mammel:Trans. TMS-AIME, 1969, vol.245, p. 1211.
J. F. W. Bishop and R. Hill:Phil. Mag, 1951, vol.42, pp. 414–27, 1298–1307.
R. Hill:J. Mech. Phys. Sol, 1967, vol.15, pp. 79–95.
F. R. N. Nabarro, Z. S. Basinski, and D. B. Holt:Adv. Phys., 1964, vol.13, p.193.
H. Tresca:Mem. Sav. Acad. Sci. Paris, 1872, vol.20, p. 281.
R. von Mises:Göttinger Nachr., Math-Phys., 1913, p. 582.
U. Dehlinger:Z. Metallic., 1943, vol.35, p. 182.
U. Dehlinger, J. Diehl, and J. Meissner:Z. Naturf, 1956, vol.1 la, pp. 37–41.
G. I. Taylor:Proc. Roy. Soc, 1934, vol.A145, p. 1.
M. Roš and A. Eichinger: Proc. 2nd Int’l. Cong. Appl. Mech., Zürich, 1926, p. 315; see also J. L. M. Morrison:Proc. Inst. Mech. Eng., 1942, vol. 144, p. 33.
R. Hill:Math. Theory of Plasticity, Clarendon Press, Oxford, 1950.
W. Sautter, A. Kochendörfer, and U. Dehlinger:Z. Metallk., 1953, vol.44, pp.442–553.
V. S. Lensky: in Plasticity, 2nd Symp. Nav. Struct. Mech., Brown Univ., E.H. Lee, ed., Pergamon Press, 1960.
G. I. Taylor: inDeformation and Flow of Solids, pp. 3–12, IUTAM Colloq. Madrid, 1955, Springer, 1956.
J. W. Hutchinson:J. Mech Phys. Sol., 1964, vol.12, pp. 25–33.
G. Y. Chin and W. L. Mammel:Trans. TMS-AIME, 1967, vol.239, pp. 1400–05.
U. E Kocks:Can. J. Phys., 1967, vol.45, p. 1134.
J. F. W. Bishop:J. Mech Phys. Sol., 1954, vol.3, pp. 130–42.
T. H. Lin and B. Lieb:J. Mech. Phys. Sol., 1962, vol.10, pp. 65–72.
See I. L. Dillamore and W. T. Roberts:Met. Rev., 1965, vol.10, pp. 271–380.
G. Y. Chin: inTextures in Research and Practice, J. Grewen and G. Wassermann, eds., pp. 51–80, Springer, 1969.
G. Sachs:Z. Verein Deut. Ing., 1928, vol.72, p. 734.
H. L. Cox and D. G. Sopwith:Proc. Phys. Soc. London, 1937, vol.49, p. 134.
A. Kochendörfer and M. Swanson:Arch. Eisenhüttenw., 1960, vol.31, pp.549–53.
Ch. Schwink:phys. stat. sol., 1965, vol.8, pp. 457–74.
Ch. Schwink and W. Vorbrugg:Z. Naturforsch, 1967, vol.22a, pp. 626–42.
U. F. Kocks: Diplom Thesis, Univ. of Göttingen, 1954.
G. Masing:Lehrbuch der Allgemeinen Metallkunde, p. 388, Springer, 1950.
G. Zankl:Z. Naturforsch., 1963, vol.18a, p. 795.
H. Wilsdorf and D. Kuhlmann-Wilsdorf:Z. Angew. Physik., 1952, vol.4, p.409.
U. Essmann, M. Rapp, and M. Wilkens:Acta Met., 1968, vol.16, pp. 1275–87.
U. F. Kocks, H. S. Chen, D. A. Rigney, and R. J. Schaefer: inWork Hardening, pp. 151–75, Gordon and Breach, 1968.
A. S. Keh:Phil. Mag., 1965, vol.12, p. 9.
E. Schmid and W. Boas: Plasticity of Crystals, p. Hughes, London, (original published in 1935).
J. Diehl:Z. Metallk., 1956, vol.47, pp. 331–43.
H. Knöll and E. Macherauch:Z. Metallk., 1964, vol.55, pp. 638–45.
S. Howe and C. Elbaum:Phil. Mag, 1961, vol.6, pp. 37–8.
F. P. Bullen and C. B. Rogers:Phil. Mag., 1964, vol.9, pp. 401–12.
F.P. Bullen, S. McK. Cousland:phys. stat. sol., 1968, vol.27, pp. 501–12.
P. Derner and E. Kappler:Z. Naturforsch., 1959, vol.14a, pp. 1080–81, 1082.
R. S. Davis, R. L. Fleischer, J. D. Livingston, and B. Chalmers:Trans. AIME, 1957, vol.209, pp. 136–40.
J. D. Livingston and B. Chalmers:Acta Met., 1957, vol.5, pp. 322–27.
R. L. Fleischer and B. Chalmers:Trans. Met. Soc. AIME. 1958, vol.212, pp.265–74.
J. J. Häuser and B. Chalmers:Acta Met., 1961, vol.9, pp. 802–18.
D. A. G. Bruggeman: Doctoral Dissertation, Utrecht, 1930.
F. Rhines:Met. Trans., 1970, vol.1, pp. 1105–20.
F. R. N. Nabarro: inSome Recent Developments in Rheology, p. 38, London, The British Rheologists’ Club, 1950.
J. C. M. Li:Trans. Met. Soc. AIME, 1963, vol.227, p. 239.
E. Macherauch:Z. Metallk., 1964, vol.55, pp. 60–82.
R. Armstrong, I. Codd, R. M. Douthwaite, and N. J. Petch:Phil. Mag., 1962, vol.7, pp. 45–58. (See also this issue.)
S. Mader:Z. Phys., 1957, vol.149, p. 73.
R. P. Carreker and W. R. Hibbard:Acta Met., 1953, vol.1, pp. 654–63.
R. P. Carreker and W. R. Hibbard:Trans. AIME, 1957, vol.209, p. 112.
R. P. Carreker and W. R. Hibbard:Trans. AIME, 1957, vol.209, p. 1157.
H. Conrad, S. Feuerstein, and L. Rice:Mat. Sci. Eng., 1967, vol.2, pp. 157–68.
U. E Kocks:Phil. Mag., 1966, vol.13, pp. 541–66.
D. McLean:Mechanical Properties of Metals, pp. 303–07, Wiley, 1962.
J. Washburn and E. R. Parker:Trans. AIME, 1952, vol.194, p. 1076.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kocks, U.F. The relation between polycrystal deformation and single-crystal deformation. Metall Trans 1, 1121–1143 (1970). https://doi.org/10.1007/BF02900224
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02900224