Abstract
The time-optimal control of MMA-MA copolymerization in a CSTR is treated for a grade-change operation. The control objective is to bring system specifications, such as polymer production rate and polymer composition, to desired values in minimum time. The initiator concentration is chosen as a manipulated variable. Two cases are considered: One is to get the time optimal control for both a desired polymer production rate and a desired weight composition of MA in dead copolymer; the other is only for a desired polymer production rate. In numerical calculation, the final t(i)f is chosen at each iteration as the time at which the system reached steady-state. This allows us to use a more easily manipulatable form of the performance index and at the same time not directly use the free final time boundary condition.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Bryson, A. E. and Ho, Y. C., “Applied Optimal Control: Optimization, Estimation and Control”, Hemisphere, Washington, D.C., 1975.
Chang, J. S. and Lai- J. L., “Computation of Optimal Temperature Policy for Molecular Weight Control in a Batch Polymerization Reactor”,Ind. Eng. Chem. Res.,3, 861 (1992).
Kirk, D. E., “Optimal Control Theory-An Introduction”, Prentice Hall, New Jersey, 1970.
Lee, M. H., Han, C. and Chang, K. S., “Hierarchical Timeoptimal Control of a Continuous Copolymerization Reactor during Start-up or Grade Change Operation Using Genetic Algorithms “,Computers & Chemical Engineering,21, S1037 (1997).
Lee, M. H., “Modeling and Time-optimal Control of MMAMA Copolymerization in CSTR”, M.S. Thesis, Pohang University of Science and Technology, Korea, 1995.
Luus, R., “Piecewise Linear Continuous Optimal Control by Iterative Dynamic Programming “,Ind. Eng. Chem. Res.,32, 859 (1993).
MacGregor, A. P. and Hamielec., A. E., “Control of Polymerization Reactors-A Review”,Polym. Proc. Eng.,2, 179 (1984).
McAuley, K. B. and MacGregor, J. F., “Optimal Grade Transitions in a Gas Phase Polyethylene Reactor”,AIChE J.,38(10), 1564 (1992).
Ponnuswamy, S. R., Shah, S. L and Kiparissides, C. A, “Computer Optimal Control of Batch Polymerization Reactors”,Ind. Eng. Chem. Res.,26, 2229 (1987).
Ray, W. H., “Polymerization Reactor Control”,IEEE Control Systems Magazine,Aug., 3 (1986).
Sacks, M. E., Lee, S. and Biesenberger, J. A., “Optimal Policies for Batch, Chain Addition Polymerizations “,Chem. Eng. Sci.,27, 2281 (1972).
Stengel, R. F., “Stochastic Optimal Control-Theory and Application”, John Wiley & Sons, 1986.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, H.J., Lee, M.H., Han, C. et al. Time-optimal control of mmama copolymerization in a CSTR for grade change. Korean J. Chem. Eng. 15, 45–50 (1998). https://doi.org/10.1007/BF02705304
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02705304