Abstract
The segregation and precipitation of boron have been studied in thermomechanically processed 0.2C-0.6Mn-0.5Mo steels containing nominally 0, 10, 20, 50, and 100 ppm B. These steels were hot-rolled in the laboratory (in simulation of production multipass rolling), and their transformation behavior during subsequent water quenching was examined for different finish-rolling temperatures (980 °C and 870 °C) and quenching temperatures (730 °C to 950 °C). The results showed that in general, a “free” boron content of 10 to 20 ppm (which is similar to the levels used for conventional quenched-and-tempered steels) will provide a boron hardenability increment similar to that for conventional quenched-and-tempered steels. The delay time prior to quenching (over the range of 10 to 100 seconds) did not have a significant effect on hardenability except in the steels containing 50 or more ppm B. In these higher B steels, precipitation of borocarbides occurred along austenite grain boundaries with a resultant decrease in hardenability.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
D.T. Llewellyn and W.T. Cook:Met. Technol., 1974, vol. 1, pp. 517–29.
Boron in Steel, S.K. Banerji and J.E. Morral, eds., TMS-AIME, Warrendale, PA, 1980.
N. Shikanai, M. Kurihara, and H. Tagawa:Proc. Int. Conf. on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals (THERMEC-88), The Iron and Steel Institute of Japan, Tokyo, 1988, pp. 98–105.
M. Imanaka, H. Terasima, C. Siga, S. Ueda, and T. Tanaka:J. Iron Steel Inst. Jpn., 1988, vol. 74, pp. 167–74.
K.A. Taylor and S.S. Hansen:Proc. Int. Symp. on Accelerated Cooling of Rolled Steel, G.E. Ruddle and A.F. Crawley, eds., Pergamon Press, Elmsford, NY, 1988, pp. 85–101.
Y. Tomita:Mater. Sci. Technol., 1988, vol. 4, pp. 613–20.
D. Dulieu, D.J. Latham, J.W. Bannister, and S. Gibson:Iron Steel, 1972, vol. 45, pp. 277–84.
K.A. Taylor and S.S. Hansen:Proc. 6th Int. Congr. on Heat Treatment of Materials, ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 137–42.
B.M. Kapadia, R.M. Brown, and W.J. Murphy:Trans. AIME, 1968, vol. 242, pp. 1689–94.
W.E. Jominy: inHardenability of Alloy Steels, ASM, Cleveland, OH, 1939, pp. 66–94.
C.T. Kunze and J.E. Russell: inHardenability Concepts with Applications to Steel, D.V. Doane and J.S. Kirkaldy, eds., TMS-AIME, Warrendale, PA, 1978, pp. 290–308.
M.A. Grossman and E.C. Bain:Principles of Heat Treatment, ASM, Metals Park, OH, 1964, pp. 75–127.
T.B. Cameron and J.E. Morral: inBoron in Steel, S.K. Banerji and J.E. Morral, eds., TMS-AIME, Warrendale, PA, 1980, pp. 61–79.
P. Rogl, J.C. Schuster, and H. Nowotny: inBoron in Steel, S.K. Banerji and J.E. Morral, eds., TMS-AIME, Warrendale, PA, 1980, pp. 33–43.
Y. Ohmori:Trans. Iron Steel Inst. Jpn., 1971, vol.11, pp. 339–48.
G.F. Melloy, P.R. Slimmon, and P.P. Podgursky:Metall. Trans., 1973, vol. 4, pp. 2279–89.
R.G. Faulkner:J. Mater. Sci., 1981, vol. 16, pp. 373–83.
S.R. Keown and F.B. Pickering:Met. Sci., 1977, vol. 11, pp. 225–34.
X.L. He, Y. Y. Chu, and J. J. Jonas:Acta Metall., 1989, vol. 37, pp. 2905–16.
V. Raghavan and G. Ghosh:J. Alloy Phase Diagrams, 1986, vol. 2, pp. 77–92.
P.E. Busby, M.F. Warga, and C. Wells:J. Met., 1953, vol. 5, pp. 1463–68.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Taylor, K.A., Hansen, S.S. The boron hardenability effect in thermomechanically processed, direct-quenched 0.2 Pct C steels. Metall Trans A 21, 1697–1708 (1990). https://doi.org/10.1007/BF02672586
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02672586