Article PDF
Avoid common mistakes on your manuscript.
Cited References
H. Pelabon and D. Gernez, “On the Selenide of Lead,”Compt. Rend.,144, 1159–1161 (1907) in French. (Equi Diagram, Meta Phases; Experimental).
K. Friedrich and A. Leroux, “The Melting Diagram of the Binary System Cu-Cu2Se, As-As2Se and Pb-PbSe,”Metallurgie, 5(12), 355–358 (1908) in German. (Equi Diagram, Meta Phases; Experimental).
J. Greenwood and H. W. Worner, “The Constitution of Dilute Alloys of Lead with Sulfur, Selenium and Tellurium,”J. Inst. Met.,7/5(2), 433–445 (1939). (Equi Diagram; Experimental).
R. Nozato and K. Isaki, “On the Equilibrium Diagram of the Lead-Selenium System (I),”Bull. Naniwa Univ. (Japan), A, 3, 125–141 (1955). (Equi Diagram, Meta Phases; Experimental;#).
B.E. Pelzel, “The Solubility of Te, Se and Mn in Liquid Lead,”Metall.,10, 717–719 (1956) in German. (Equi Diagram, Meta Phases; Experimental).
V.P. Zlomanov, B. A. Popovkin, and A.V. Novoselova, “Determination of the Saturated Vapor Pressure of Solid Lead Selenide,”Z. Neorg. Khim., 4(12), 2661–2664 (1959) in Russian; TR:Russ. J. Inorganic Chem., 4(12), 1231–1233 (1959). (Thermo, Pressure; Experimental).
C.B. Finch and B. Wagner, Jr., “Determination of the Standard Free Energy of Formation of Lead Selenide,”J. Electrochem. Soc.,107(11), 932–933 (1960). (Thermo; Experimental).
D. Seidman, I. Cadoff, K. Komarek, and E. Miller, “Note on the Pb-Se Phase Diagram,”Trans. Metall. AIME, 221, 1269–1270 (1961). (Equi Diagram, Meta Phases; Experimental).
R.F. Brebrick and E. Gubner, “PbSe Composition Stability Limits,”J. Chem. Phys., 36(1), 170–172(1962). (Equi Diagram, Pressure; Experimental).
H. Ohashi and K. Isaki, “Physico-Chemical Study of Lead Selenide,”Trans. Jpn. Inst. Met.,5, 94–96 (1964). (Thermo, Pressure; Experimental).
T. Takahashi, W. A. Bassett, and J.S. Weaver, “Crystallographic Study of High-Pressure Phases of Lead Sulfide, Selenide, and Telluride, and Its Implication to the Study of the Mantle,”Geol. Soc. Am., Spec. Papers, (76), 162–163 (1966). (Equi Diagram; Experimental).
I. Prigogine and R. Defay,Chemical Thermodynamics, Longmans Green and Co., London, England (1965). (Thermo; Compilation).
E. Miller and K.L. Komarek, “Retrograde Solubility in Semiconducting Intermetallic Compounds. Liquidus Curves in the Pb-S, Pb-Se and Pb-Te Systems,”Trans. Metall. AIME, 236, 832–840 (1966). (Equi Diagram, Meta Phases; Experimental).
D.N. Seidman, “The Partial Lead-Selenium (0 to 76 at. % Se) Phase Diagram,”Trans. Metall. AIME, 236, 1361–1362(1966). (Equi Diagram, Meta Phases; Experimental; #)
A.V. Novoselova, V.P. Zlomanov, and O. V. Matveev, “Physico-chemical Investigation of Lead Selenide,”Izv. Akad. Nauk SSSR, Neorg. Mater., 3(8), 1323–1329 (1967) in Russian; TR:Inorganic Mater, 5(8), 1154–1159 (1967). (Thermo, Pressure; Experimental).
H. Abrams, “Precipitation Studies of Pb and Se in PbSe SingleCrystals,” diss., Lehigh Univ. (1968). (Equi Diagram, Pressure; Experimental).
N. Chou, K. Komarek, and E. Miller, “Retrograde Solubility of PbS, PbSe and Pb Te,”Trans. Metall. AIME, 245, 1553–1550 (1969). (Equi Diagram, Pressure; Experimental).
E.E. Hansen, Z.A. Munir, and M.J. Mitchell, “Sublimation Pressure and Sublimation Coefficient of Single-Crystal Lead Selenide,”J. Am. Ceram. Soc.,52, 610–612 (1969). (Thermo, Pressure; Experimental).
V.V. Sokolov, A.S. Pashchinkin, A.V. Novoselova, A.A. Ryazantsev, V.A. Dolgikh, and S.A. Klinchikova, “Saturated Vapor Pressures of Tin and Lead Tellurides and Lead Selenide,”Izv. Akad. Nauk SSSR, Neorg. Mater, 5(1), 15–19 (1969) in Russian; TR:Inorganic Mater., 5(1), 12–15(1969). (Thermo, Pressure; Experimental).
S.N. Hajiev, “Advances in Experimental Thermochemistry. 1. The Determination of Enthalpies of Formation of Binary Semiconducting Compounds by Direct Synthesis in a Bomb Calorimeter,”J. Chem. Thermodyn., 2, 765–773 (1970). (Thermo; Experimental).
B.J. Sealy and A.J. Crocker, “TheP-T-X Phase Diagram of PbTe and PbSe”J. Mater. Sci.,8, 1737–1743 (1973). (Equi Diagram, Thermo, Pressure; Theory).
A.P. Leushina and M.V. Simonova, “Measurement by the Electromotive Force Method of the Transport Numbers of Lead Diodide and the Deviations from Stoichiometry in Lead Chalcogenides,”Z. Fiz. Khim.,48(5), 1187–1189 (1974) in Russian; TR:Russ. J. Phys. Chem., 48(5), 687–688 (1974). (Equi Diagram; Experimental).
K.C. Mills, “Thermodynamic Data for Inorganic Sulfides, Selenides and Tellurides,” Butterworth and Co., London, England (1974). (Pressure; Compilation).
S. Scherrer, M. Rodot, M. Schneider, and P. Manet, “Study of the Precipitation of Se in PbSe,”J. Phys. Lett. (Orsay), 35(2),L15-L18 (1974) in French. (Equi Diagram, Pressure; Experimental).
M. Schneider and J.C. Guillaume, “Study of Pb-Se Liquid Alloys by Electro-Chemical Method,”J. Phys. Chem. Solids, 35, 471–478 (1974) in French. (Equi Diagram, Meta Phases, Thermo; Experimental;#)
M. Schneider, diss., l’Université Paris VI, Paris, France (1974). (Equi Diagram, Pressure; Experimental).
V.P. Zlomanov, E.V. Masyakin, and A.V. Novoselova,“P-T-X Phase Diagram of the Pb-Se System and Vapor Phase Growth Mechanism of Lead Selenide Single Crystals,”J. Cryst. Growth, 26, 261 -266 (1974). (Equi Diagram, Pressure; Experimental).
V. Leute and H. Schmidtke, “Investigation of the Mechanism of Diffusion in Quasibinary Systems (Pb,Sn) Te and (Pb,Sn) Se,”Ber. Bunsenges Phys. Chem.,79, 1134–1140 (1975) in German. (Equi Diagram, Thermo, Pressure; Experimental).
H.H. Kellogg, “Thermochemical Modeling of Molten Sulfides,” inPhysical Chemistry in Metallurgy, R.M. Fisher, R.A. Oriani, and E.T. Turkdogan, Ed., Proceedings of the Darken Conference, Aug. 23–25, 1976; United States Steel, Research Laboratory, Monroeville, PA, 49–68 (1976). (Thermo; Review)
R.F. Brebrick, “Analysis of the Solidus Lines for PbTe and SnTe,”J. Electron. Mater.,6, 659–692 (1977). (Equi Diagram; Theory)
G. Chaussemy and A. Laugier, “Viscosity and Radial Distribution Function in PbxSe1-x Melts for Stoichiometric and Peritectic Compositions,”J. Phys. Lett., 40(19), L529-L532 (1979). (Thermo; Experimental).
G. Chaussemy, J. Fornazero, and A. Laugier, “Viscosity and Local Order in PbxSe1-x Melts,”J. Phys. Coll., 41(8), C8:371-C8:373 (1980). (Thermo; Experimental).
A.V. Novoselova and V.P. Zlomanov, “Thermodynamics and Imperfections in Lead Chalcogenides,” inCurrent Topics in Material Science, Vol. 7, E. Kaldis, Ed., North-Holland Publishing Co., 642–710 (1981). (Equi Diagram, Thermo, Pressure; Theory)
M. Shamsuddin and S. Misra, “Thermodynamic Investigations of Lead Chalcogenides,” inChemical Metallurgy—A Tribute to Carl Wagner, N.A. Gokcen, Ed., The Metallurgical Society of AIME, 241–256 (1981). (Thermo; Experimental).
K.P. Kotchi, R. Castanet, and J.-C. Mathieu, “A Calorimetric Study on the Thermodynamics of the Pb-Se System,”Thermochem. Acta, 76, 311–323 (1984) in French. (Thermo; Experimental).
T. Ngai, J.-C. Lin, and Y. A. Chang, Ongoing research, University of Wisconsin, Madison, Wisconsin (1984). (Equi Diagram, Thermo, Pressure; Theory)
R. Schmid and Y. A. Chang, “A Thermodynamic Study on an Associated Solution Model for Liquid Alloys,”Calphad,9, 363–382, in review (1985). (Thermo; Theory)
Author information
Authors and Affiliations
Additional information
This work was supported by ASM International. Literature searched through 1984. Assessment done in 1986. R.C. Sharma was Visiting Assistant Professor, 1984–1986, on leave from Indian Institute of Technology, Kampur, U.P. 208016, India. Professor Chang is the Alloy Phase Diagram Program Category Editor for binary Group II–VI and III–V alloys.
Rights and permissions
About this article
Cite this article
Lin, J.C., Sharma, R.C. & Chang, Y.A. The Pb-Se (lead-selenium) system. JPE 17, 253–260 (1996). https://doi.org/10.1007/BF02648495
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02648495