Zusammenfassung
Insgesamt ist die Literatur über die theoretische Erforschung der Werkstoffschädigung in der Kaltmassivumformung sehr unfangreich. Im allgemeinen stützen die Bruchkriterien sich verständlicherweise fast alle auf ein isotropes Versagensmodell, da bisher die veränderliche Anisotropie in der Regel nur sehr unvollkommen wiedergegeben wird. In der vorliegenden Arbeit werden einige repräsentative Bruchkriterien übersichtlich vorgestellt, die in Verbindung mit einer Berechnungsmethode zur Untersuchung der Rißbildung in Kaltmassivumformvorgängen oft verwendet wurden.
Article PDF
Avoid common mistakes on your manuscript.
Literatur
Appeltauer, J., N.L., Dung O. Mahrenholtz: Some theoretical and numerical aspects of large deformations in three-dimensional metal forming. Proc. NUMIFORM '89, Fort Collins, USA, 1989, 523/527.
Appeltauer, J., N.L. Dung, O. Mahrenholtz: Numerische Untersuchung der Rißbildung infolge plastischen Fließens. ZAMM 70 (1990), T312/T314.
Atkins, A.G., Y.-W. Mai: Elastic and Plastic Fracture Chichester: Ellis Horwood, 1988.
Brown, L.M., J.D. Embury: The initiation and growth of voids at second phase particles. Proc. 3rd Int. Conf. on Strength of Metals and Alloys, Cambridge, U.K., 1973, 164/169.
Clift, S.E.: Identification of defect locations in forged products using the finite element method. PhD-Thesis, University of Birmingham, U.K., 1986.
Cockcroft, M.G., D.J. Latham: Ductility and the workability of metals. J. Inst. Met. 96 (1968), 33/39.
Dodd, B., Y. Bai, Ductile Fracture and Ductility. London: Academic Press, 1987.
Dung, N.L.: Ein Beitrag zur Berechnung instationärer starr-plastischer Formänderungen mit einer Finite-Element-Methode. Fortschr.-Ber. VDI Reihe 2 Nr. 46, Düsseldorf: VDI-Verlag 1981.
Dung, N.L.: Identification of defect locations in uniaxial compression samples. Mech. Res. Comm. 15 (1988), 123/130.
Dung, N.L.: Ein Beitrag zur Untersuchung der Rißentstehung in der Kaltmassivumformung metallischer Werkstoffe. Fortschr.-Ber. VDI Reihe 2 Nr. 175, Düsseldorf: VDI-Verlag 1989.
Gelin, J.C.: Modèles numériques et expérimenteaux en grandes déformations plastiques et endommagement de rupture ductile. Thèse de doctorat d'Etat. Université Paris VI 1985.
Gruson, A.L.: Continuum theory of ductile rupture by void nucleation and growth. Part 1. J. Engl. Mat. & Tech. 99 (1977), 2/15.
Hom, C.L., R.M. McMeeking: Void growth in elastic-plastic materials. J. Appl. Mech. 56 (1989). 309/317.
Lemaitre, J.: A continuous damage mechanics model for ductile fracture. J. Eng. Mat. & Tech. 107 (1985), 83/89.
Lemaitre, J, J.-L. Chaboche: Mechanics of Solid Materials. Cambridge: University Press 1990.
McClintock, F.A.: A criterion for ductile fracture by the growth of holes. J. Appl. Mech. 90 (1968), 363/371.
McClintock, F.A., S.M. Kaplan, C.A. Berg: Ductile fracture by hole growth in shear bands. Int. J. Frac. Mech. 2 (1966), 614/627.
Oyane, M.: Criteria of ductile fracture strain. Bull. JSME 15 (1972), 1507/1513.
Oyane, M., T. Sato, K. Okimoto, S. Shima: Criteria for ductile fracture and their applications. J. Mech. Working Tech. 4 (1980), 65/81.
Rice, J.R., D.M. Tracey: On the ductile enlargement of voids in triaxial stress fields. J. Mech. Phys. Solids 17 (1969), 201/217.
Sowerby, R., N. Chandrasekaran, N.L. Dung, O. Mahrenholtz: The prediction of damage accumulation during upsetting tests based on McClintock's model. VDI-Forsch. Ing.-Wes. 51 (1985), 147/150.
Thomason, P.F.: Ductile fracture and the stability of incompressible plasticity in the presence of microvoids. Acta Metall. 29 (1981), 763/777.
Thomason, P.F., Ductile Fracture of Metals. Oxford: Pergamon Press, 1990.
Tvergaard, V.: On localization in ductile materials containing spherical voids. Int. J. Frac. 18 (1982), 237/252.
Tvergaard, V., A. Needleman: Analysis of the cup-cone fracture in a round tensile bar. Acta Metall. 32 (1984), 157/169.
Author information
Authors and Affiliations
Additional information
Anläßlich des 60. Geburtstages von Herrn Prof. Dr.-Ing. O. Mahrenholtz
Der erste Autor dankt der Deutschen Forschungsgemeinschaft für die finanzielle Unterstützung (DFG-Stipendium Du 178/2-1).
Rights and permissions
About this article
Cite this article
Dung, N.L., Appeltauer, J. Repräsentative Bruchkriterien in der Kaltmassivumformung metallischer Werkstoffe. Forsch Ing-Wes 58, 54–60 (1992). https://doi.org/10.1007/BF02575328
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02575328