Abstract
We present an optimization model for the design of rectangular reinforced concrete beams subject to a specified set of constraints. Our model is more realistic than previously published models because it minimizes the cost of the beam on strength design procedures, while also considering the costs of concrete, steel and shuttering. Thus our method leads to very practical designs. As there is an infinite number of possible beam dimensions and reinforcement ratios that yield the same moment of resistance, an efficient search technique is preferred over the more traditional iterative methods. We employ a simple genetic algorithm as the search engine, and we compare our results with those obtained via geometric programming. Since the adjustment of parameters in a genetic algorithm (e.g., population size, crossover and mutation rates, and maximum number of generations) is a significant problem for any application, we present our own methodology to deal with this problem. A prototype of this system is currently being tested in México, in order to evaluate its potential as a reliable design tool for real world applications.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Belegunda, A.D. (1982) A study of mathematical programming methods for structural optimization. PhD thesis, University of Iowa, Department of Civil and Environmental Engineering
Holland, J.H. (1975) Adaptation in Natural and Artificial Systems. University of Michigan Press, Ann Arbor, MI
Goldberg, D.E. (1989) Genetic Algorithms in Search, Optimization and Machine Learning. Addison-Wesley, Reading, MA
Chakrabarty, B.K. (1992) A model for optimal design of reinforced concrete beam. Journal of Structural Engineering, 118, 11, 3238–3242
Chakrabarty, B.K. (1992) Model for optimal design of reinforced concrete beams. Computers and Structures, 42, 3, 447–451
Everard, N.J. (1993) Theory and Problems of Reinforced Concrete Design. Schaum's Outline Series. Third edition, McGraw-Hill, New York
Galilei, G. (1950) Dialogues Concerning Two New Sciences. Northwestern University Press, Evanston, Ill (originally published in 1665)
Haug, E.J. (1966) Minimum Weight Design of Beams with Inequality Constraints on Stress and Deflection. Department of Mechanical Engineering, Kansas State University
Haug, E.J.; Kirmser, P.G. (1967) Minimum weight design of beams with inequality constraints on stress and deflection. Journal of Applied Mechanics. Transactions of the ASME, 999–1004
Venkayya, V.B. (1971) Design of optimum structures. Computers and Structures, 1, 265–309
Karihaloo, B.L. (1979) Optimal design of multi-purpose tie-beams. Journal of Optimization Theory and Applications, 27, 3, 427–438
Haug, E.J.; Arora, J.S. (1979) Applied Optimal Design. John Wiley, New York
Saouma, V.E.; Murad, R.S. (1984) Partially prestressed concrete beam optimization. Journal of Structural Engineering, 110, 3, 589–604
Gupta, N.C.D.; Paul, H.; Yu, C.H. (1986) An application of geometric programming to structural design. Computers and Structures, 22, 6, 965–971.
Rao, S.S. (1984) Multiobjective optimization in structural design with uncertain parameters and stochastic processes. AIAA Journal, 22, 11, 1670–1678.
Osyczka, A. (1984) Multicriterion Optimization in Engineering with FORTRAN Programs. Ellis Horwood Limited, Chichester
Osyczka, A. (1985) Multicriteria optimization for engineering design. In Design Optimization, (Gero, J.S., Editor). Academic Press, New York, 193–227
Lounis, Z.; Cohn, M.Z. (1993) Multiobjective optimization of prestressed concrete structures. Journal of Structural Engineering, 119, 3, 794–808
Prakash, A.; Agarwala, S.K.; Singh, K.K. (1988) Optimum design of reinforced concrete sections. Computers and Structures, 30, 4, 1009–1011
Koza, J.R. (1992) Genetic Programming. On the Programming of Computers by Means of Natural Selection. The MIT Press, Cambridge, MA
Michalewicz, Z. (1992) Genetic Algorithms + Data Structures = Evolution Programs, 2nd edition. Springer-Verlag, Berlin
Buckles, B.P.; Petry, F.E. (Editors) (1992) Genetic Algorithms. Technology Series, IEEE Computer Society Press
Coello, C.A.C. (1994) Discrete optimization of trusses using genetic algorithms. In EXPERSYS-94. Expert Systems Applications and Artificial Intelligience (Chen, J., Attia, F.G. and Crabtree, D.L., Editors). IITT International. Technology Transfer Series, Houston, Texas, 331–336
Coello, C.A.; Christiansen, A.D. (1995) Using genetic algorithms for optimal design of axially loaded non-prismatic columns. Technical Report TUTR-CS-95-101, Tulane University
Coello, C.A.; Hernández, F.S.; Farrera, F.A. (1995) An approach to optimal design of reinforced concrete beams using genetic algorithms. Proceedings of the IASTED International Conference on Applied Modelling, Simulation and Optimization, IASTEDACTA Press, Cancún, México, 141–144
Coello, C.A.; Christiansen, A.D. (1995) Using genetic algorithms for optimal design of axially loaded non-prismatic columns (Pearson, D.W., Steele, N.C. and Albrecht, R.F., Editors). In International Conference on Artificial Neural Nets and Genetic Algorithms, ICANNGA'95, Alès, France. Ecole des Mines d'Alès, Springer-Verlag, 460–463
Coello, C.A.; Christiansen, A.D. (1994) Optimization of truss designs using genetic algorithms. Technical Report TUTR-CS-94-102, Tulane University
Glover, F. (1989) Tabu Search-Part I. OSRA Journal on Computing, 1, 3, 190–206
Glover, F. (1990) Tabu Search-Part II. ORSA Journal on Computing, 2, 4–32
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Coello Coello, C.A., Christiansen, A.D. & Hernández, F.S. A simple genetic algorithm for the design of reinforced concrete beams. Engineering with Computers 13, 185–196 (1997). https://doi.org/10.1007/BF01200046
Issue Date:
DOI: https://doi.org/10.1007/BF01200046