Abstract
This study investigates the mechanisms that contribute to determining the maximum spreading of a liquid droplet impacting a solid surface in connection with splat-quench solidification. This paper defines two domains, the viscous dissipation domain and the surface tension domain, which are characterized by the Weber and the Reynolds numbers, and that are discriminated by the principal mechanism responsible for arresting the splat spreading. This paper illustrates the importance of correctly determining the equilibrium contact angle (a surface tension characteristic that quantifies the wetting of the substrate) for predicting the maximum spreading of the splat. Conditions under which solidification of the splat would or would not be expected to contribute to terminating the spreading of the splat are considered. However, our a priori assumption is that the effect of solidification on the spreading of a droplet, superheated at impact, is secondary compared to the effects of viscous dissipation and surface tension.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Abbreviations
- a :
-
Thermal diffusivity
- C s :
-
Correction factor
- C v :
-
Correction factor
- d :
-
Initial diameter of droplet
- D :
-
Final diameter of splat
- E k :
-
Initial kinetic energy at impact
- E s :
-
Rise in surface tension energy
- E v :
-
Viscous energy dissipated
- s :
-
Terminal thickness of splat
- t c :
-
Spreading time of splat
- u :
-
Velocity of impinging droplet
- V :
-
Volume of splat (droplet)
- x :
-
Space variable
- κ:
-
Madejski's solidification parameter
- μ:
-
dynamic viscosity
- φ:
-
Dissipation function
- ϱ:
-
Density of liquid
- σ:
-
Liquid-vapour surface tension
- θe :
-
Equilibrium contact angle
- ξ:
-
D/d (spreading factor)
- Pe :
-
ud/a (Péclet number)
- Re :
-
ρud/μ (Reynolds number)
- We :
-
ρu 2d/σ (Weber number)
References
H. Jones, Rep. Prog. Phys. 36, (1973) 1425.
B. H. Kear, B. C. Giessen and M. Cohen, in “Rapidly Solidified Amorphous and Crystalline Alloys”, Materials Research Society Symposia Proceedings, Vol. 8 (North-Holland, New York, 1981).
B. H. Kear and B. C. Giessen, in “Rapidly Solidified Metastable Materials”, Materials Research Society Symposia Proceedings, Vol. 28 (North-Holland, New York, 1984).
M. Tenhover, W. L. Johnson and L. E. Tanner, in “Science and Technology of Rapidly Quenched Alloys”, Materials Research Society Symposia Proceedings, Vol. 80 (Materials Research Society, Pittsburgh, Pennsylvania, 1987).
P. G. Boswell, Metals Forum 2 (1979) 40.
R. C. Ruhl, Mater. Sci. Engng 1 (1967) 313.
J. Madejski, Int. J. Heat Mass Transfer 19 (1976) 1009.
Idem, ibid. 26 (1983) 1095.
R. McPherson, J. Mater. Sci. 15 (1980) 3141.
H. Jones, J. Phys. D: Appl. Phys. 4 (1971) 1657.
E. W. Collings, A. J. Markworth, J. K. McCoy and J. H. Saunders, J. Mater. Sci. 25 (1990) 3677.
S. Chandra and C. T. Avedisian, in Fall Technical Meeting of the Eastern States Section of the Combustion Institute, Orlando, Florida, December 1990, Paper No. 83.
G. J. Dienes and H. F. Klemm, J. Appl. Phys. 17 (1946) 458.
A. W. Adamson, “Physical Chemistry of Surfaces”, 4th Edn (Wiley, New York, 1982) pp. 338–340.
S. H. Davis, Trans. ASME: J. Appl. Mech. 50 (1983) 977.
P. G. de Gennes, Rev. Mod. Phys. 57 (1985) 827.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bennett, T., Poulikakos, D. Splat-quench solidification: estimating the maximum spreading of a droplet impacting a solid surface. Journal of Materials Science 28, 963–970 (1993). https://doi.org/10.1007/BF00400880
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00400880