Summary
Effects of the workpiece surface vibration on planing noise were investigated theoretically and experimentally. A method of calculating the sound pressure level generated by the workpiece surface vibration due to the impact of planing knives was developed. Sound pressure levels and sound spectra calculated using this method show good agreement with measured values.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Brooks, T. F., Bailey, J. R. 1975: Mechanisms of aerodynamic noise generation in idling wood-working machines. ASME Paper 75-DET-47
Gösele, K. 1953: Schallabstrahlung von Platten, die zu Biegeschwingungen angeregt sind. Acustica 3:243–248
Heydt, F., Schwarz, H.-J. 1977: Geräuschuntersuchungen und Maßnahmen zur Geräuschminderung an mehrseitigen Hobel-und Fräsmaschinen für die Holzbearbeitung. Holz Roh- Werkstoff 35:323–326
Nippon Onkyo Zairyo Kyokai 1966: Soon Taisaku Handbook. Gihodo, Tokyo, 253 (In Japanese)
Pahlitzsch, G., Liegmann, E. 1956: Geräuschuntersuchungen an einer Abricht-Hobelmaschine. Holz Roh-Werkstoff 14: 121–136
Stewart, J. S. 1972: A therotical and experimental study of wood planer noise and its control. Dept. Mech. Aerosp. Eng., N. C. State Univ., Raleigh, N. C.
Tanaka, C. 1975: Studies on the hand feed planer noise. Bull. Shimane Univ. Forests 3
Tröger, J. 1969: Über den Mechanismus der Schallentstehung beim Spanen. 2. Mit.: Untersuchungen über den Leerlauflärm. Holztechnologie 10: 265–269
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tanaka, C. The effect of workpiece vibration on planing noise. Wood Sci. Technol. 13, 301–309 (1979). https://doi.org/10.1007/BF00356971
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00356971