Abstract
The contact of the chip with the tool’s front surface in cutting is analyzed by numerical modeling. The high-pressure zones and buildup at the tool’s contact surface are studied. The influence of plastic instability of the chip surface and vortex deformation modes on tool wear is considered.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Zorev, N.N., Voprosy mekhaniki protsessa rezaniya (Mechanics of Cutting Process), Moscow: Mashgiz, 1956.
Kabaldin, Yu.G., Shpilev, A.M., and Burkov, A.A., Soliton mechanism of vibration perturbation in technological self-organizing systems, Vestn. Mashinostr., 2000, no. 3, pp. 31–37.
Kabaldin, Yu.G., Oleinikov, A.I., and Burkov, A.A., Synergetics of the evolution of structures and soliton mechanisms of friction, wear, and lubrication during cutting, Vestn. Mashinostr., 2000, no. 1, pp. 34–41.
Pavlov, V.A., Amorphization of the structure of metals and alloys with an extremely high degree of deformation, Fiz. Met. Metalloved., 1985, vol. 59, no. 4, pp. 629–649.
Belotserkovskii, O.M., Chislennyi eksperiment v turbulentnosti: ot poryadka k khaosu (Numerical Experiment in Turbulence: From Order to Chaos), Moscow: Nauka, 1997.
Chernyi, G.G., The motion of a melting solid between two semispaces, Dokl. Akad. Nauk SSSR, 1985, vol. 282, no. 4, pp. 814–818.
Krasulin, Yu.P. and Timofeev, V.N., Heat release on contact surfaces during metal processing, in Fizikomekhanicheskie i teplofizicheskie svoistva metallov (Physical-Mechanical and Thermophysical Properties of Metals), Moscow: Nauka, 1976, pp. 132–136.
Panin, V.E., Likhachev, V.A., and Grinyaev, Yu.V., Strukturnye urovnii deformatsii tverdykh tel (Structural Levels of Deformation in Solids), Novosibirsk: Nauka, 1985.
Kabaldin, Yu.G., Seryi, S.V., Kretinin, O.V., et al., Komp’yuternoe modelirovanie i issledovanie nanostruktur v protsessakh obrabotki rezaniem na osnove kvantovomekhanicheskikh raschetov (Computer Modeling and Study of Nanostructures in the Cutting Processes Based on Quantum Mechanical Calculations), Nizhny Novgorod: Nizhegorod. Gos. Tekh. Univ., 2014.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Yu.G. Kabaldin, A.A. Kuz’mishina, V.O. Zotov, E.E. Vlasov, 2017, published in Vestnik Mashinostroeniya, 2017, No. 8, pp. 75–81.
About this article
Cite this article
Kabaldin, Y.G., Kuz’mishina, A.A., Zotov, V.O. et al. Influence of cut layer on cutting. Russ. Engin. Res. 37, 962–968 (2017). https://doi.org/10.3103/S1068798X17110053
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17110053