Abstract
An analytical model is obtained for calculating the working life of a cutting tool with a plasmamodified surface layer. It permits calculation of the conditions ensuring increased wear resistance of the tool and hence increased reliability in manufacturing on numerically controlled machine tools.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Brzhozovskii, B.M., Zinina, E.P., Martynov, V.V., and Pleshakova, E.S., The quality of operation of a modified tool, Vestn. Mashinostr., 2015, no. 6, pp. 69–72.
Brzhozovskii, B.M., Martynov, V.V., Zinina, E.P., and Pleshakova, E.S., Reliability of modified cutting tools, Russ. Eng. Res., 2014, vol. 34, no. 12, pp. 769–772.
Brzhozovskii, B.M., Martynov, V.V., Brovkova, M.B., and Zinina, E.P., The efficiency of machining of parts by using a tool with modified working surfaces and optimized cutting process, Naukoemkie Tekhnol. Mashinotr., 2012, no. 1, pp. 3–10.
Brzhozovskii, B.M., Venig, S.B., Galushka, V.V., et al., Integral’noe otsenivanie kachestva protsessa plazmennoi modifikatsii rabochei chasti metallorezhushchego instrumenta (the Complex Assessment of the Quality of Plasma-Modified of the Working Part of the Metal Cutting Tool), Saratov: Rait-Ekspo, 2014.
GOST (State Standard) 8233-56: Steel. Microstructure Standards, Moscow: Izd. Standartov, 2004.
Kudinov, V.A., Dinamika stankov (Dynamics of Machines), Moscow: Mashinostroenie, 1967.
Kabaldin Yu.G., Bilenko, S.V., and Sablin, P.A., Mathematical modeling of the dynamic stability of the cutting system as a nonlinear oscillator with discontinuous characteristics, Vestn. Mashinostr., 2006, no. 10, pp. 35–43.
Sankin, Yu.N. and Sankin, N.Yu., Ustoichivost’ tokarnykh stankov pri nelineinoi kharakteristike protsessa rezaniya (Stability of Lathes with Nonlinear Character of Cutting), Sankin, Yu.N., Ed., Ulyanovsk: Ulyanovsk. Gos. Tekh. Univ., 2008.
Brzhozovskii, B.M., Martynov, V.V., and Zinina, E.P., Uprochnenie rezhushchego instrumenta vozdeistviem nizkotemperaturnoi plazmy kombinirovannogo razryada (Strengthening of Cutting Tool by Low-Temperature Plasma of Combined Discharge), Saratov: Saratov. Gos. Tekh. Univ., 2009.
Vladimirov, V.I., Fizicheskaya priroda razrusheniya metallov (The Physical Nature of the Destruction of Metals), Moscow: Metallurgiya, 1984.
Takhman, S.I., Development of unified models of wear of the tool hard alloys, Vestn. Mashinostr., 2008, no. 9, pp. 56–59.
Bersudskii, A.L., Influence of the stress-strain state of the surface layer on the wear resistance of the surfaces of parts, Probl. Mashinostr. Nadezhnosti Mash., 2006, no. 6, pp. 52–59.
Sovetov, B.Ya. and Yakovlev, S.A., Modelirovanie sistem: uchebnik dlya vuzov (Modeling of Systems: Manual for Higher Education of Institutions), Moscow: Vysshaya Shkola, 1985.
Hahn, G.J. and Shapiro, S.S., Statistical Models in Engineering, New York: Wiley, 1967.
Khazov, B.F. and Didusev, B.A., Spravochnik po raschetu nadezhnosti mashin na stadii proektirovaniya (Handbook on Calculation of Machine Reliability at the Design Stage), Moscow: Mashinostroenie, 1986.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © B.M. Brzhozovskii, E.P. Zinina, V.V. Martynov, E.S. Pleshakova, 2017, published in Vestnik Mashinostroeniya, 2017, No. 7, pp. 75–80.
About this article
Cite this article
Brzhozovskii, B.M., Zinina, E.P., Martynov, V.V. et al. Wear resistance of cutting tools with a plasma-modified surface layer. Russ. Engin. Res. 37, 882–887 (2017). https://doi.org/10.3103/S1068798X17100069
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17100069