Abstract
Metal-cutting processes are considered, on the basis of physical models. The parts and equipment used for cutting are analyzed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kuznetsov, A.P., Structure of cutting processes and equipment. Part 2. Structure and classification of technological processes, Russ. Eng. Res., 2015, vol. 35, no. 6.
Merchant, E. and Moehring, S., An Interpretive Review of Twentieth-Century USMachining and Grinding Research, Cincinnati: TechSolve, 2003.
Malyshev, V.I., Ocherki istorii nauki o rezanii materialov (Outlines of the History of Cutting Science), Tolyatti: TGU, 2011.
Parton, V.Z., Mekhanika razrusheniya: Ot teorii k praktike (Failure Mechanics: From Theory to Practice), Moscow: Nauka, 1990.
Parton, V.Z. and Morozov, E.M., Mekhanika uprugoplasticheskogo razrusheniya (Elastoplastic Failure Mechanics), Moscow: Nauka, 1985.
Bogatov, A.A., Mekhanicheskie svoistva i modeli razrusheniya metallov (Mechanical Properties and Failure Models for Metals), Yekaterinburg: GOU VPO UGTU–UPI, 2002.
Starkov, V.K., Fizika i optimizatsiya rezaniya materialov (Physics and Optimization of Cutting), Moscow: Mashinostroenie, 2009.
Sultan-Zade, N.M., Albagachiev, A.Yu., and Vorontsov, A.L., Teoreticheskie osnovy obrabotki met-allov v mashinostroenii (Theoretical Principles of Metalworking in Manufacturing), Staryi Oskol: TNT, 2013.
Kachanov, L.M., Osnovy teorii plastichnosti (Fundamentals of Plasticity Theory), Moscow: Nauka, 1969.
Machining with Nanomaterials, Jackson, M.J. and Morrell, J.S., Eds., New York: Springer, 2009.
Kuznetsov, A.P. and Kosov, M.G., Structural precision of metal-cutting machines, Russ. Eng. Res., 2012, vol. 32, no. 11/12, pp. 725–729.
Kuznetsov, A.P. and Kosov, M.G., Structural precision of metal-cutting machines, Russ. Eng. Res., 2012, vol. 32, no. 5/6, pp. 482–490.
Kuznetsov, A.P., Teplovoe povedenie i tochnost’ metallorezhushchikh stankov (Thermal Behavior and Precision of Metal-Cutting Machines), Moscow: Yanus-K, 2011.
Granovskii, G.I., Kinematika rezaniya (Cutting Kinematics), Moscow: Mashgiz, 1948.
Ermakov, Yu.M., Kompleksnye sposoby effektivnoi obrabotki rezaniem (Effective Hybrid Cutting Methods), Moscow: Mashinostroenie, 2005.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.P. Kuznetsov, 2015, published in Vestnik Mashinostroeniya, 2015, No. 4, pp. 76–87.
Parts 1 and 2 appeared in the previous two issues. Part 4 will appear in the next issue. The numbering of the tables and figures continues from the previous parts.
About this article
Cite this article
Kuznetsov, A.P. Structure of cutting processes and equipment. Part 3. Structure of cutting processes. Russ. Engin. Res. 35, 517–529 (2015). https://doi.org/10.3103/S1068798X15070096
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X15070096